From: Andrey Smirnov <andrew.smirnov@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: Andrey Smirnov <andrew.smirnov@gmail.com>, Shawn Guo <shawnguo@kernel.org>, Chris Healy <cphealy@gmail.com>, Cory Tusar <cory.tusar@zii.aero>, Fabio Estevam <festevam@gmail.com>, linux-kernel@vger.kernel.org Subject: [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes Date: Fri, 23 Aug 2019 17:27:47 -0700 [thread overview] Message-ID: <20190824002747.14610-1-andrew.smirnov@gmail.com> (raw) The devicetree specification recommends using generic node names. Some ZII dts files already follow such recommendation, but some don't, so use generic node names for consistency among the ZII dts files. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index 45a978defbdc..6edd682dbd29 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -417,7 +417,7 @@ pinctrl-0 = <&pinctrl_dspi1>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -430,7 +430,7 @@ }; }; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -519,7 +519,7 @@ #gpio-cells = <2>; }; - lm75@48 { + temp-sensor@48 { compatible = "national,lm75"; reg = <0x48>; }; @@ -534,7 +534,7 @@ reg = <0x52>; }; - ds1682@6b { + elapsed-time-recorder@6b { compatible = "dallas,ds1682"; reg = <0x6b>; }; @@ -551,7 +551,7 @@ reg = <0x38>; }; - adt7411@4a { + adc@4a { compatible = "adi,adt7411"; reg = <0x4a>; }; @@ -563,7 +563,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - gpio9: sx1503q@20 { + gpio9: io-expander@20 { compatible = "semtech,sx1503q"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sx1503_20>; @@ -574,12 +574,12 @@ interrupts = <31 IRQ_TYPE_EDGE_FALLING>; }; - lm75@4e { + temp-sensor@4e { compatible = "national,lm75"; reg = <0x4e>; }; - lm75@4f { + temp-sensor@4f { compatible = "national,lm75"; reg = <0x4f>; }; @@ -591,17 +591,17 @@ reg = <0x23>; }; - adt7411@4a { + adc@4a { compatible = "adi,adt7411"; reg = <0x4a>; }; - at24c08@54 { + eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; }; - tca9548@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; pinctrl-names = "default"; #address-cells = <1>; @@ -639,7 +639,7 @@ }; }; - tca9548@71 { + i2c-mux@71 { compatible = "nxp,pca9548"; pinctrl-names = "default"; reg = <0x71>; -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Andrey Smirnov <andrew.smirnov@gmail.com> To: linux-arm-kernel@lists.infradead.org Cc: Cory Tusar <cory.tusar@zii.aero>, Andrey Smirnov <andrew.smirnov@gmail.com>, Shawn Guo <shawnguo@kernel.org>, linux-kernel@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, Chris Healy <cphealy@gmail.com> Subject: [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes Date: Fri, 23 Aug 2019 17:27:47 -0700 [thread overview] Message-ID: <20190824002747.14610-1-andrew.smirnov@gmail.com> (raw) The devicetree specification recommends using generic node names. Some ZII dts files already follow such recommendation, but some don't, so use generic node names for consistency among the ZII dts files. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index 45a978defbdc..6edd682dbd29 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -417,7 +417,7 @@ pinctrl-0 = <&pinctrl_dspi1>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -430,7 +430,7 @@ }; }; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; @@ -519,7 +519,7 @@ #gpio-cells = <2>; }; - lm75@48 { + temp-sensor@48 { compatible = "national,lm75"; reg = <0x48>; }; @@ -534,7 +534,7 @@ reg = <0x52>; }; - ds1682@6b { + elapsed-time-recorder@6b { compatible = "dallas,ds1682"; reg = <0x6b>; }; @@ -551,7 +551,7 @@ reg = <0x38>; }; - adt7411@4a { + adc@4a { compatible = "adi,adt7411"; reg = <0x4a>; }; @@ -563,7 +563,7 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - gpio9: sx1503q@20 { + gpio9: io-expander@20 { compatible = "semtech,sx1503q"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sx1503_20>; @@ -574,12 +574,12 @@ interrupts = <31 IRQ_TYPE_EDGE_FALLING>; }; - lm75@4e { + temp-sensor@4e { compatible = "national,lm75"; reg = <0x4e>; }; - lm75@4f { + temp-sensor@4f { compatible = "national,lm75"; reg = <0x4f>; }; @@ -591,17 +591,17 @@ reg = <0x23>; }; - adt7411@4a { + adc@4a { compatible = "adi,adt7411"; reg = <0x4a>; }; - at24c08@54 { + eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; }; - tca9548@70 { + i2c-mux@70 { compatible = "nxp,pca9548"; pinctrl-names = "default"; #address-cells = <1>; @@ -639,7 +639,7 @@ }; }; - tca9548@71 { + i2c-mux@71 { compatible = "nxp,pca9548"; pinctrl-names = "default"; reg = <0x71>; -- 2.21.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-08-24 0:27 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-24 0:27 Andrey Smirnov [this message] 2019-08-24 0:27 ` [PATCH] ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes Andrey Smirnov 2019-08-25 7:18 ` Shawn Guo 2019-08-25 7:18 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190824002747.14610-1-andrew.smirnov@gmail.com \ --to=andrew.smirnov@gmail.com \ --cc=cory.tusar@zii.aero \ --cc=cphealy@gmail.com \ --cc=festevam@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.