From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCHv4 2/3] arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus
Date: Sat, 24 Aug 2019 18:49:11 +0000 [thread overview]
Message-ID: <20190824184912.795-3-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190824184912.795-1-linux.amoon@gmail.com>
Add missing linking regulator node to usb bus for power usb devices.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous patch
[1] https://lore.kernel.org/patchwork/patch/1031243/
split the changes and add the comments to power source
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 41d5fa370eb3..f3dcabf97c63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -36,8 +36,15 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ /*
+ * signal name from schematics: PWREN
+ */
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /*
+ * signal name from sehematics: USB_POWER
+ */
+ vin-supply = <&p5v0>;
};
leds {
--
2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [PATCHv4 2/3] arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus
Date: Sat, 24 Aug 2019 18:49:11 +0000 [thread overview]
Message-ID: <20190824184912.795-3-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190824184912.795-1-linux.amoon@gmail.com>
Add missing linking regulator node to usb bus for power usb devices.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous patch
[1] https://lore.kernel.org/patchwork/patch/1031243/
split the changes and add the comments to power source
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 41d5fa370eb3..f3dcabf97c63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -36,8 +36,15 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ /*
+ * signal name from schematics: PWREN
+ */
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /*
+ * signal name from sehematics: USB_POWER
+ */
+ vin-supply = <&p5v0>;
};
leds {
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [PATCHv4 2/3] arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus
Date: Sat, 24 Aug 2019 18:49:11 +0000 [thread overview]
Message-ID: <20190824184912.795-3-linux.amoon@gmail.com> (raw)
In-Reply-To: <20190824184912.795-1-linux.amoon@gmail.com>
Add missing linking regulator node to usb bus for power usb devices.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous patch
[1] https://lore.kernel.org/patchwork/patch/1031243/
split the changes and add the comments to power source
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 41d5fa370eb3..f3dcabf97c63 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -36,8 +36,15 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ /*
+ * signal name from schematics: PWREN
+ */
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ /*
+ * signal name from sehematics: USB_POWER
+ */
+ vin-supply = <&p5v0>;
};
leds {
--
2.23.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-08-24 18:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-24 18:49 [PATCHv4 0/3] Odroid c2 usb fixs Anand Moon
2019-08-24 18:49 ` Anand Moon
2019-08-24 18:49 ` Anand Moon
2019-08-24 18:49 ` [PATCHv4 1/3] arm64: dts: meson: odroid-c2: p5v0 is the main 5V power input Anand Moon
2019-08-24 18:49 ` Anand Moon
2019-08-24 18:49 ` Anand Moon
2019-08-24 18:49 ` Anand Moon [this message]
2019-08-24 18:49 ` [PATCHv4 2/3] arm64: dts: meson: odroid-c2: Add missing linking regulator to usb bus Anand Moon
2019-08-24 18:49 ` Anand Moon
2019-08-24 18:49 ` [PATCHv4 3/3] arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warning Anand Moon
2019-08-24 18:49 ` Anand Moon
2019-08-24 18:49 ` Anand Moon
2019-08-24 21:18 ` [PATCHv4 0/3] Odroid c2 usb fixs Martin Blumenstingl
2019-08-24 21:18 ` Martin Blumenstingl
2019-08-24 21:18 ` Martin Blumenstingl
2019-08-26 4:38 ` Anand Moon
2019-08-26 4:38 ` Anand Moon
2019-08-26 4:38 ` Anand Moon
2019-08-27 21:19 ` Martin Blumenstingl
2019-08-27 21:19 ` Martin Blumenstingl
2019-08-27 21:19 ` Martin Blumenstingl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190824184912.795-3-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.