From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, jbrunet@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-clk@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/5] clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock
Date: Mon, 26 Aug 2019 09:25:37 +0200 [thread overview]
Message-ID: <20190826072539.27725-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190826072539.27725-1-narmstrong@baylibre.com>
The Amlogic SM1 DynamIQ Shared Unit has a dedicated clock tree similar to the
CPU clock tree with a supplementaty mux to select the CPU0 clock instead.
Leave this as read-only since it's set up by the early boot stages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 184 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 15 +++-
2 files changed, 198 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 34dfac4b4dc6..e00df17f800a 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -676,6 +676,172 @@ static struct clk_regmap g12b_cpub_clk = {
},
};
+static struct clk_regmap sm1_gp1_pll;
+
+/* Datasheet names this field as "premux0" */
+static struct clk_regmap sm1_dsu_clk_premux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap sm1_dsu_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "Mux0_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux0" */
+static struct clk_regmap sm1_dsu_clk_postmux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw,
+ &sm1_dsu_clk_mux0_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Mux1_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux1" */
+static struct clk_regmap sm1_dsu_clk_postmux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw,
+ &sm1_dsu_clk_mux1_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_dyn_mux_sel" */
+static struct clk_regmap sm1_dsu_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_postmux0.hw,
+ &sm1_dsu_clk_postmux1.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap sm1_dsu_final_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_final",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_dyn.hw,
+ &g12a_sys_pll.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 4 */
+static struct clk_regmap sm1_dsu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL6,
+ .mask = 0x1,
+ .shift = 27,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cpu_clk.hw,
+ &sm1_dsu_final_clk.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
static int g12a_cpu_clk_mux_notifier_cb(struct notifier_block *nb,
unsigned long event, void *data)
{
@@ -4401,6 +4567,15 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_TS] = &g12a_ts.hw,
[CLKID_GP1_PLL_DCO] = &sm1_gp1_pll_dco.hw,
[CLKID_GP1_PLL] = &sm1_gp1_pll.hw,
+ [CLKID_DSU_CLK_DYN0_SEL] = &sm1_dsu_clk_premux0.hw,
+ [CLKID_DSU_CLK_DYN0_DIV] = &sm1_dsu_clk_premux1.hw,
+ [CLKID_DSU_CLK_DYN0] = &sm1_dsu_clk_mux0_div.hw,
+ [CLKID_DSU_CLK_DYN1_SEL] = &sm1_dsu_clk_postmux0.hw,
+ [CLKID_DSU_CLK_DYN1_DIV] = &sm1_dsu_clk_mux1_div.hw,
+ [CLKID_DSU_CLK_DYN1] = &sm1_dsu_clk_postmux1.hw,
+ [CLKID_DSU_CLK_DYN] = &sm1_dsu_clk_dyn.hw,
+ [CLKID_DSU_CLK_FINAL] = &sm1_dsu_final_clk.hw,
+ [CLKID_DSU_CLK] = &sm1_dsu_clk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4623,6 +4798,15 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12b_cpub_clk_trace,
&sm1_gp1_pll_dco,
&sm1_gp1_pll,
+ &sm1_dsu_clk_premux0,
+ &sm1_dsu_clk_premux1,
+ &sm1_dsu_clk_mux0_div,
+ &sm1_dsu_clk_postmux0,
+ &sm1_dsu_clk_mux1_div,
+ &sm1_dsu_clk_postmux1,
+ &sm1_dsu_clk_dyn,
+ &sm1_dsu_final_clk,
+ &sm1_dsu_clk,
};
static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index e426b4121b7a..6804fcced6b5 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -80,6 +80,11 @@
#define HHI_SYS_CPUB_CLK_CNTL1 0x200
#define HHI_SYS_CPUB_CLK_CNTL 0x208
#define HHI_VPU_CLKB_CNTL 0x20C
+#define HHI_SYS_CPU_CLK_CNTL2 0x210
+#define HHI_SYS_CPU_CLK_CNTL3 0x214
+#define HHI_SYS_CPU_CLK_CNTL4 0x218
+#define HHI_SYS_CPU_CLK_CNTL5 0x21c
+#define HHI_SYS_CPU_CLK_CNTL6 0x220
#define HHI_GEN_CLK_CNTL 0x228
#define HHI_VDIN_MEAS_CLK_CNTL 0x250
#define HHI_MIPIDSI_PHY_CLK_CNTL 0x254
@@ -242,8 +247,16 @@
#define CLKID_CPUB_CLK_TRACE_SEL 240
#define CLKID_CPUB_CLK_TRACE 241
#define CLKID_GP1_PLL_DCO 242
+#define CLKID_DSU_CLK_DYN0_SEL 244
+#define CLKID_DSU_CLK_DYN0_DIV 245
+#define CLKID_DSU_CLK_DYN0 246
+#define CLKID_DSU_CLK_DYN1_SEL 247
+#define CLKID_DSU_CLK_DYN1_DIV 248
+#define CLKID_DSU_CLK_DYN1 249
+#define CLKID_DSU_CLK_DYN 250
+#define CLKID_DSU_CLK_FINAL 251
-#define NR_CLKS 244
+#define NR_CLKS 253
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, jbrunet@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH v2 3/5] clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock
Date: Mon, 26 Aug 2019 09:25:37 +0200 [thread overview]
Message-ID: <20190826072539.27725-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190826072539.27725-1-narmstrong@baylibre.com>
The Amlogic SM1 DynamIQ Shared Unit has a dedicated clock tree similar to the
CPU clock tree with a supplementaty mux to select the CPU0 clock instead.
Leave this as read-only since it's set up by the early boot stages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 184 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 15 +++-
2 files changed, 198 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 34dfac4b4dc6..e00df17f800a 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -676,6 +676,172 @@ static struct clk_regmap g12b_cpub_clk = {
},
};
+static struct clk_regmap sm1_gp1_pll;
+
+/* Datasheet names this field as "premux0" */
+static struct clk_regmap sm1_dsu_clk_premux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap sm1_dsu_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "Mux0_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux0" */
+static struct clk_regmap sm1_dsu_clk_postmux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw,
+ &sm1_dsu_clk_mux0_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Mux1_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux1" */
+static struct clk_regmap sm1_dsu_clk_postmux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw,
+ &sm1_dsu_clk_mux1_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_dyn_mux_sel" */
+static struct clk_regmap sm1_dsu_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_postmux0.hw,
+ &sm1_dsu_clk_postmux1.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap sm1_dsu_final_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_final",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_dyn.hw,
+ &g12a_sys_pll.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 4 */
+static struct clk_regmap sm1_dsu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL6,
+ .mask = 0x1,
+ .shift = 27,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cpu_clk.hw,
+ &sm1_dsu_final_clk.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
static int g12a_cpu_clk_mux_notifier_cb(struct notifier_block *nb,
unsigned long event, void *data)
{
@@ -4401,6 +4567,15 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_TS] = &g12a_ts.hw,
[CLKID_GP1_PLL_DCO] = &sm1_gp1_pll_dco.hw,
[CLKID_GP1_PLL] = &sm1_gp1_pll.hw,
+ [CLKID_DSU_CLK_DYN0_SEL] = &sm1_dsu_clk_premux0.hw,
+ [CLKID_DSU_CLK_DYN0_DIV] = &sm1_dsu_clk_premux1.hw,
+ [CLKID_DSU_CLK_DYN0] = &sm1_dsu_clk_mux0_div.hw,
+ [CLKID_DSU_CLK_DYN1_SEL] = &sm1_dsu_clk_postmux0.hw,
+ [CLKID_DSU_CLK_DYN1_DIV] = &sm1_dsu_clk_mux1_div.hw,
+ [CLKID_DSU_CLK_DYN1] = &sm1_dsu_clk_postmux1.hw,
+ [CLKID_DSU_CLK_DYN] = &sm1_dsu_clk_dyn.hw,
+ [CLKID_DSU_CLK_FINAL] = &sm1_dsu_final_clk.hw,
+ [CLKID_DSU_CLK] = &sm1_dsu_clk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4623,6 +4798,15 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12b_cpub_clk_trace,
&sm1_gp1_pll_dco,
&sm1_gp1_pll,
+ &sm1_dsu_clk_premux0,
+ &sm1_dsu_clk_premux1,
+ &sm1_dsu_clk_mux0_div,
+ &sm1_dsu_clk_postmux0,
+ &sm1_dsu_clk_mux1_div,
+ &sm1_dsu_clk_postmux1,
+ &sm1_dsu_clk_dyn,
+ &sm1_dsu_final_clk,
+ &sm1_dsu_clk,
};
static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index e426b4121b7a..6804fcced6b5 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -80,6 +80,11 @@
#define HHI_SYS_CPUB_CLK_CNTL1 0x200
#define HHI_SYS_CPUB_CLK_CNTL 0x208
#define HHI_VPU_CLKB_CNTL 0x20C
+#define HHI_SYS_CPU_CLK_CNTL2 0x210
+#define HHI_SYS_CPU_CLK_CNTL3 0x214
+#define HHI_SYS_CPU_CLK_CNTL4 0x218
+#define HHI_SYS_CPU_CLK_CNTL5 0x21c
+#define HHI_SYS_CPU_CLK_CNTL6 0x220
#define HHI_GEN_CLK_CNTL 0x228
#define HHI_VDIN_MEAS_CLK_CNTL 0x250
#define HHI_MIPIDSI_PHY_CLK_CNTL 0x254
@@ -242,8 +247,16 @@
#define CLKID_CPUB_CLK_TRACE_SEL 240
#define CLKID_CPUB_CLK_TRACE 241
#define CLKID_GP1_PLL_DCO 242
+#define CLKID_DSU_CLK_DYN0_SEL 244
+#define CLKID_DSU_CLK_DYN0_DIV 245
+#define CLKID_DSU_CLK_DYN0 246
+#define CLKID_DSU_CLK_DYN1_SEL 247
+#define CLKID_DSU_CLK_DYN1_DIV 248
+#define CLKID_DSU_CLK_DYN1 249
+#define CLKID_DSU_CLK_DYN 250
+#define CLKID_DSU_CLK_FINAL 251
-#define NR_CLKS 244
+#define NR_CLKS 253
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com, jbrunet@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH v2 3/5] clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock
Date: Mon, 26 Aug 2019 09:25:37 +0200 [thread overview]
Message-ID: <20190826072539.27725-4-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190826072539.27725-1-narmstrong@baylibre.com>
The Amlogic SM1 DynamIQ Shared Unit has a dedicated clock tree similar to the
CPU clock tree with a supplementaty mux to select the CPU0 clock instead.
Leave this as read-only since it's set up by the early boot stages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/clk/meson/g12a.c | 184 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 15 +++-
2 files changed, 198 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 34dfac4b4dc6..e00df17f800a 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -676,6 +676,172 @@ static struct clk_regmap g12b_cpub_clk = {
},
};
+static struct clk_regmap sm1_gp1_pll;
+
+/* Datasheet names this field as "premux0" */
+static struct clk_regmap sm1_dsu_clk_premux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap sm1_dsu_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_data = (const struct clk_parent_data []) {
+ { .fw_name = "xtal", },
+ { .hw = &g12a_fclk_div2.hw },
+ { .hw = &g12a_fclk_div3.hw },
+ { .hw = &sm1_gp1_pll.hw },
+ },
+ .num_parents = 4,
+ },
+};
+
+/* Datasheet names this field as "Mux0_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux0" */
+static struct clk_regmap sm1_dsu_clk_postmux0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux0.hw,
+ &sm1_dsu_clk_mux0_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Mux1_divn_tcnt" */
+static struct clk_regmap sm1_dsu_clk_mux1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+/* Datasheet names this field as "postmux1" */
+static struct clk_regmap sm1_dsu_clk_postmux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_premux1.hw,
+ &sm1_dsu_clk_mux1_div.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_dyn_mux_sel" */
+static struct clk_regmap sm1_dsu_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_postmux0.hw,
+ &sm1_dsu_clk_postmux1.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Final_mux_sel" */
+static struct clk_regmap sm1_dsu_final_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL5,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk_final",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sm1_dsu_clk_dyn.hw,
+ &g12a_sys_pll.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
+/* Datasheet names this field as "Cpu_clk_sync_mux_sel" bit 4 */
+static struct clk_regmap sm1_dsu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL6,
+ .mask = 0x1,
+ .shift = 27,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "dsu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &g12a_cpu_clk.hw,
+ &sm1_dsu_final_clk.hw,
+ },
+ .num_parents = 2,
+ },
+};
+
static int g12a_cpu_clk_mux_notifier_cb(struct notifier_block *nb,
unsigned long event, void *data)
{
@@ -4401,6 +4567,15 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
[CLKID_TS] = &g12a_ts.hw,
[CLKID_GP1_PLL_DCO] = &sm1_gp1_pll_dco.hw,
[CLKID_GP1_PLL] = &sm1_gp1_pll.hw,
+ [CLKID_DSU_CLK_DYN0_SEL] = &sm1_dsu_clk_premux0.hw,
+ [CLKID_DSU_CLK_DYN0_DIV] = &sm1_dsu_clk_premux1.hw,
+ [CLKID_DSU_CLK_DYN0] = &sm1_dsu_clk_mux0_div.hw,
+ [CLKID_DSU_CLK_DYN1_SEL] = &sm1_dsu_clk_postmux0.hw,
+ [CLKID_DSU_CLK_DYN1_DIV] = &sm1_dsu_clk_mux1_div.hw,
+ [CLKID_DSU_CLK_DYN1] = &sm1_dsu_clk_postmux1.hw,
+ [CLKID_DSU_CLK_DYN] = &sm1_dsu_clk_dyn.hw,
+ [CLKID_DSU_CLK_FINAL] = &sm1_dsu_final_clk.hw,
+ [CLKID_DSU_CLK] = &sm1_dsu_clk.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -4623,6 +4798,15 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12b_cpub_clk_trace,
&sm1_gp1_pll_dco,
&sm1_gp1_pll,
+ &sm1_dsu_clk_premux0,
+ &sm1_dsu_clk_premux1,
+ &sm1_dsu_clk_mux0_div,
+ &sm1_dsu_clk_postmux0,
+ &sm1_dsu_clk_mux1_div,
+ &sm1_dsu_clk_postmux1,
+ &sm1_dsu_clk_dyn,
+ &sm1_dsu_final_clk,
+ &sm1_dsu_clk,
};
static const struct reg_sequence g12a_init_regs[] = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index e426b4121b7a..6804fcced6b5 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -80,6 +80,11 @@
#define HHI_SYS_CPUB_CLK_CNTL1 0x200
#define HHI_SYS_CPUB_CLK_CNTL 0x208
#define HHI_VPU_CLKB_CNTL 0x20C
+#define HHI_SYS_CPU_CLK_CNTL2 0x210
+#define HHI_SYS_CPU_CLK_CNTL3 0x214
+#define HHI_SYS_CPU_CLK_CNTL4 0x218
+#define HHI_SYS_CPU_CLK_CNTL5 0x21c
+#define HHI_SYS_CPU_CLK_CNTL6 0x220
#define HHI_GEN_CLK_CNTL 0x228
#define HHI_VDIN_MEAS_CLK_CNTL 0x250
#define HHI_MIPIDSI_PHY_CLK_CNTL 0x254
@@ -242,8 +247,16 @@
#define CLKID_CPUB_CLK_TRACE_SEL 240
#define CLKID_CPUB_CLK_TRACE 241
#define CLKID_GP1_PLL_DCO 242
+#define CLKID_DSU_CLK_DYN0_SEL 244
+#define CLKID_DSU_CLK_DYN0_DIV 245
+#define CLKID_DSU_CLK_DYN0 246
+#define CLKID_DSU_CLK_DYN1_SEL 247
+#define CLKID_DSU_CLK_DYN1_DIV 248
+#define CLKID_DSU_CLK_DYN1 249
+#define CLKID_DSU_CLK_DYN 250
+#define CLKID_DSU_CLK_FINAL 251
-#define NR_CLKS 244
+#define NR_CLKS 253
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/g12a-clkc.h>
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-08-26 7:25 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-26 7:25 [PATCH v2 0/5] 0/6] arm64: meson-sm1: add support for DVFS Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` [PATCH v2 1/5] dt-bindings: clk: meson: add sm1 periph clock controller bindings Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` [PATCH v2 2/5] clk: meson: g12a: add support for SM1 GP1 PLL Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong [this message]
2019-08-26 7:25 ` [PATCH v2 3/5] clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` [PATCH v2 4/5] clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: enable DVFS Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:25 ` Neil Armstrong
2019-08-26 7:26 ` Neil Armstrong
2019-08-26 7:26 ` Neil Armstrong
2019-08-26 7:26 ` Neil Armstrong
2019-08-26 10:38 ` [PATCH v2 0/5] 0/6] arm64: meson-sm1: add support for DVFS Jerome Brunet
2019-08-26 10:38 ` Jerome Brunet
2019-08-26 10:38 ` Jerome Brunet
2019-08-27 19:12 ` Kevin Hilman
2019-08-27 19:12 ` Kevin Hilman
2019-08-27 19:12 ` Kevin Hilman
2019-08-27 22:35 ` Kevin Hilman
2019-08-27 22:35 ` Kevin Hilman
2019-08-27 22:35 ` Kevin Hilman
2019-08-28 8:11 ` Jerome Brunet
2019-08-28 8:11 ` Jerome Brunet
2019-08-28 8:11 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190826072539.27725-4-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.