From: Cristian Marussi <cristian.marussi@arm.com> To: linux-kselftest@vger.kernel.org, linux-arm-kernel@lists.infradead.org, shuah@kernel.org Cc: andreyknvl@google.com, dave.martin@arm.com, amit.kachhap@arm.com Subject: [PATCH v4 01/11] kselftest: arm64: add skeleton Makefile Date: Fri, 30 Aug 2019 17:42:38 +0100 [thread overview] Message-ID: <20190830164248.16238-2-cristian.marussi@arm.com> (raw) In-Reply-To: <20190830164248.16238-1-cristian.marussi@arm.com> Add a new arm64-specific empty subsystem amongst TARGETS of KSFT build framework; keep these new arm64 KSFT testcases separated into distinct subdirs inside tools/testing/selftests/arm64/ depending on the specific subsystem targeted. Run the new KSFT TARGETS=arm64 related tests from the toplevel KSFT Makefile in the usual ways. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> --- v3--->v4 - comment reword - simplified documentation in README - dropped README about standalone --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/arm64/Makefile | 51 ++++++++++++++++++++++++++ tools/testing/selftests/arm64/README | 20 ++++++++++ 3 files changed, 72 insertions(+) create mode 100644 tools/testing/selftests/arm64/Makefile create mode 100644 tools/testing/selftests/arm64/README diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 25b43a8c2b15..1722dae9381a 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 TARGETS = android +TARGETS += arm64 TARGETS += bpf TARGETS += breakpoints TARGETS += capabilities diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile new file mode 100644 index 000000000000..03a0d4f71218 --- /dev/null +++ b/tools/testing/selftests/arm64/Makefile @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2019 ARM Limited + +# When ARCH not overridden for crosscompiling, lookup machine +ARCH ?= $(shell uname -m) +ARCH := $(shell echo $(ARCH) | sed -e s/aarch64/arm64/) + +ifeq ("x$(ARCH)", "xarm64") +SUBDIRS := +else +SUBDIRS := +endif + +CFLAGS := -Wall -O2 -g + +export CC +export CFLAGS + +all: + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + mkdir -p $$BUILD_TARGET; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +install: all + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +run_tests: all + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +# Avoid any output on non arm64 on emit_tests +emit_tests: all + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +clean: + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +.PHONY: all clean install run_tests emit_tests diff --git a/tools/testing/selftests/arm64/README b/tools/testing/selftests/arm64/README new file mode 100644 index 000000000000..aca892e62a6c --- /dev/null +++ b/tools/testing/selftests/arm64/README @@ -0,0 +1,20 @@ +KSelfTest ARM64 +=============== + +- These tests are arm64 specific and so not built or run but just skipped + completely when env-variable ARCH is found to be different than 'arm64' + and `uname -m` reports other than 'aarch64'. + +- Holding true the above, ARM64 KSFT tests can be run within the KSelfTest + framework using standard Linux top-level-makefile targets: + + $ make TARGETS=arm64 kselftest-clean + $ make TARGETS=arm64 kselftest + + or + + $ make -C tools/testing/selftests TARGETS=arm64 \ + INSTALL_PATH=<your-installation-path> install + + Further details on building and running KFST can be found in: + Documentation/dev-tools/kselftest.rst -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Cristian Marussi <cristian.marussi@arm.com> To: linux-kselftest@vger.kernel.org, linux-arm-kernel@lists.infradead.org, shuah@kernel.org Cc: amit.kachhap@arm.com, andreyknvl@google.com, dave.martin@arm.com Subject: [PATCH v4 01/11] kselftest: arm64: add skeleton Makefile Date: Fri, 30 Aug 2019 17:42:38 +0100 [thread overview] Message-ID: <20190830164248.16238-2-cristian.marussi@arm.com> (raw) In-Reply-To: <20190830164248.16238-1-cristian.marussi@arm.com> Add a new arm64-specific empty subsystem amongst TARGETS of KSFT build framework; keep these new arm64 KSFT testcases separated into distinct subdirs inside tools/testing/selftests/arm64/ depending on the specific subsystem targeted. Run the new KSFT TARGETS=arm64 related tests from the toplevel KSFT Makefile in the usual ways. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> --- v3--->v4 - comment reword - simplified documentation in README - dropped README about standalone --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/arm64/Makefile | 51 ++++++++++++++++++++++++++ tools/testing/selftests/arm64/README | 20 ++++++++++ 3 files changed, 72 insertions(+) create mode 100644 tools/testing/selftests/arm64/Makefile create mode 100644 tools/testing/selftests/arm64/README diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 25b43a8c2b15..1722dae9381a 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 TARGETS = android +TARGETS += arm64 TARGETS += bpf TARGETS += breakpoints TARGETS += capabilities diff --git a/tools/testing/selftests/arm64/Makefile b/tools/testing/selftests/arm64/Makefile new file mode 100644 index 000000000000..03a0d4f71218 --- /dev/null +++ b/tools/testing/selftests/arm64/Makefile @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2019 ARM Limited + +# When ARCH not overridden for crosscompiling, lookup machine +ARCH ?= $(shell uname -m) +ARCH := $(shell echo $(ARCH) | sed -e s/aarch64/arm64/) + +ifeq ("x$(ARCH)", "xarm64") +SUBDIRS := +else +SUBDIRS := +endif + +CFLAGS := -Wall -O2 -g + +export CC +export CFLAGS + +all: + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + mkdir -p $$BUILD_TARGET; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +install: all + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +run_tests: all + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +# Avoid any output on non arm64 on emit_tests +emit_tests: all + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +clean: + @for DIR in $(SUBDIRS); do \ + BUILD_TARGET=$(OUTPUT)/$$DIR; \ + make OUTPUT=$$BUILD_TARGET -C $$DIR $@; \ + done + +.PHONY: all clean install run_tests emit_tests diff --git a/tools/testing/selftests/arm64/README b/tools/testing/selftests/arm64/README new file mode 100644 index 000000000000..aca892e62a6c --- /dev/null +++ b/tools/testing/selftests/arm64/README @@ -0,0 +1,20 @@ +KSelfTest ARM64 +=============== + +- These tests are arm64 specific and so not built or run but just skipped + completely when env-variable ARCH is found to be different than 'arm64' + and `uname -m` reports other than 'aarch64'. + +- Holding true the above, ARM64 KSFT tests can be run within the KSelfTest + framework using standard Linux top-level-makefile targets: + + $ make TARGETS=arm64 kselftest-clean + $ make TARGETS=arm64 kselftest + + or + + $ make -C tools/testing/selftests TARGETS=arm64 \ + INSTALL_PATH=<your-installation-path> install + + Further details on building and running KFST can be found in: + Documentation/dev-tools/kselftest.rst -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-30 16:43 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-30 16:42 [PATCH v4 00/11] Add arm64/signal initial kselftest support Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi [this message] 2019-08-30 16:42 ` [PATCH v4 01/11] kselftest: arm64: add skeleton Makefile Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 02/11] kselftest: arm64: add common utils and one testcase Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 03/11] kselftest: arm64: mangle_pstate_invalid_daif_bits Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 04/11] kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht] Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 05/11] kselftest: arm64: mangle_pstate_ssbs_regs Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 06/11] kselftest: arm64: fake_sigreturn_bad_magic Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 07/11] kselftest: arm64: fake_sigreturn_bad_size_for_magic0 Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 08/11] kselftest: arm64: fake_sigreturn_missing_fpsimd Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 09/11] kselftest: arm64: fake_sigreturn_duplicated_fpsimd Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 10/11] kselftest: arm64: fake_sigreturn_bad_size Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi 2019-08-30 16:42 ` [PATCH v4 11/11] kselftest: arm64: fake_sigreturn_misaligned_sp Cristian Marussi 2019-08-30 16:42 ` Cristian Marussi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190830164248.16238-2-cristian.marussi@arm.com \ --to=cristian.marussi@arm.com \ --cc=amit.kachhap@arm.com \ --cc=andreyknvl@google.com \ --cc=dave.martin@arm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kselftest@vger.kernel.org \ --cc=shuah@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.