From: Daniel Baluta <daniel.baluta@nxp.com> To: broonie@kernel.org Cc: festevam@gmail.com, shengjiu.wang@nxp.com, Xiubo.Lee@gmail.com, nicoleotsuka@gmail.com, timur@kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Viorel Suman <viorel.suman@nxp.com>, NXP Linux Team <linux-imx@nxp.com>, Daniel Baluta <daniel.baluta@nxp.com> Subject: [PATCH] ASoC: fsl_sai: Implement set_bclk_ratio Date: Sat, 31 Aug 2019 00:59:10 +0300 [thread overview] Message-ID: <20190830215910.31590-1-daniel.baluta@nxp.com> (raw) From: Viorel Suman <viorel.suman@nxp.com> This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size. Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> --- sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fe126029f4e3..e896b577b1f7 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -137,6 +137,16 @@ static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, return 0; } +static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai, + unsigned int ratio) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + + sai->bclk_ratio = ratio; + + return 0; +} + static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int fsl_dir) { @@ -423,8 +433,14 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, slot_width = sai->slot_width; if (!sai->is_slave_mode) { - ret = fsl_sai_set_bclk(cpu_dai, tx, - slots * slot_width * params_rate(params)); + if (sai->bclk_ratio) + ret = fsl_sai_set_bclk(cpu_dai, tx, + sai->bclk_ratio * + params_rate(params)); + else + ret = fsl_sai_set_bclk(cpu_dai, tx, + slots * slot_width * + params_rate(params)); if (ret) return ret; @@ -640,6 +656,7 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, } static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { + .set_bclk_ratio = fsl_sai_set_dai_bclk_ratio, .set_sysclk = fsl_sai_set_dai_sysclk, .set_fmt = fsl_sai_set_dai_fmt, .set_tdm_slot = fsl_sai_set_dai_tdm_slot, diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 3a3f6f8e5595..f96f8d97489d 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -177,6 +177,7 @@ struct fsl_sai { unsigned int mclk_streams; unsigned int slots; unsigned int slot_width; + unsigned int bclk_ratio; const struct fsl_sai_soc_data *soc_data; struct snd_dmaengine_dai_dma_data dma_params_rx; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Baluta <daniel.baluta@nxp.com> To: broonie@kernel.org Cc: alsa-devel@alsa-project.org, timur@kernel.org, Xiubo.Lee@gmail.com, Daniel Baluta <daniel.baluta@nxp.com>, shengjiu.wang@nxp.com, linux-kernel@vger.kernel.org, nicoleotsuka@gmail.com, NXP Linux Team <linux-imx@nxp.com>, Viorel Suman <viorel.suman@nxp.com>, festevam@gmail.com Subject: [alsa-devel] [PATCH] ASoC: fsl_sai: Implement set_bclk_ratio Date: Sat, 31 Aug 2019 00:59:10 +0300 [thread overview] Message-ID: <20190830215910.31590-1-daniel.baluta@nxp.com> (raw) Message-ID: <20190830215910.SRf5Y-7SVbY8ui5doceFYjYteNo63Nk2y8CQrAmcWSs@z> (raw) From: Viorel Suman <viorel.suman@nxp.com> This is to allow machine drivers to set a certain bitclk rate which might not be exactly rate * frame size. Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> --- sound/soc/fsl/fsl_sai.c | 21 +++++++++++++++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index fe126029f4e3..e896b577b1f7 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -137,6 +137,16 @@ static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, return 0; } +static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai, + unsigned int ratio) +{ + struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai); + + sai->bclk_ratio = ratio; + + return 0; +} + static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int fsl_dir) { @@ -423,8 +433,14 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, slot_width = sai->slot_width; if (!sai->is_slave_mode) { - ret = fsl_sai_set_bclk(cpu_dai, tx, - slots * slot_width * params_rate(params)); + if (sai->bclk_ratio) + ret = fsl_sai_set_bclk(cpu_dai, tx, + sai->bclk_ratio * + params_rate(params)); + else + ret = fsl_sai_set_bclk(cpu_dai, tx, + slots * slot_width * + params_rate(params)); if (ret) return ret; @@ -640,6 +656,7 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, } static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = { + .set_bclk_ratio = fsl_sai_set_dai_bclk_ratio, .set_sysclk = fsl_sai_set_dai_sysclk, .set_fmt = fsl_sai_set_dai_fmt, .set_tdm_slot = fsl_sai_set_dai_tdm_slot, diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 3a3f6f8e5595..f96f8d97489d 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -177,6 +177,7 @@ struct fsl_sai { unsigned int mclk_streams; unsigned int slots; unsigned int slot_width; + unsigned int bclk_ratio; const struct fsl_sai_soc_data *soc_data; struct snd_dmaengine_dai_dma_data dma_params_rx; -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-08-30 21:59 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-30 21:59 Daniel Baluta [this message] 2019-08-30 21:59 ` [alsa-devel] [PATCH] ASoC: fsl_sai: Implement set_bclk_ratio Daniel Baluta 2019-09-06 1:29 ` Nicolin Chen 2019-09-06 1:29 ` [alsa-devel] " Nicolin Chen 2019-09-11 11:00 ` Mark Brown 2019-09-11 11:00 ` [alsa-devel] " Mark Brown 2019-09-11 13:06 ` Daniel Baluta 2019-09-11 13:06 ` Daniel Baluta 2019-09-12 23:55 ` Nicolin Chen 2019-09-12 23:55 ` Nicolin Chen 2019-09-12 23:54 ` Nicolin Chen 2019-09-12 23:54 ` [alsa-devel] " Nicolin Chen 2019-09-13 9:42 ` Applied "ASoC: fsl_sai: Implement set_bclk_ratio" to the asoc tree Mark Brown 2019-09-13 9:42 ` [alsa-devel] " Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190830215910.31590-1-daniel.baluta@nxp.com \ --to=daniel.baluta@nxp.com \ --cc=Xiubo.Lee@gmail.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=festevam@gmail.com \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=nicoleotsuka@gmail.com \ --cc=shengjiu.wang@nxp.com \ --cc=timur@kernel.org \ --cc=viorel.suman@nxp.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.