[PATCH 2/2] mmc: block: add CMD13 polling for ioctl() cmd with R1B response

[Chaotian Jing <chaotian.jing@mediatek.com>]

currently there is no CMD13 polling and other code to wait card
change to transfer state after R1B command completed. and this
polling operation cannot do in user space, because other request
may coming before the CMD13 from user space.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 drivers/mmc/core/block.c | 107 ++++++++++++++++++++-------------------
 1 file changed, 55 insertions(+), 52 deletions(-)

diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index aa7c19f7e298..9d6f7a5612b5 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -468,6 +468,58 @@ static int ioctl_do_sanitize(struct mmc_card *card)
 	return err;
 }
 
+static inline bool mmc_blk_in_tran_state(u32 status)
+{
+	/*
+	 * Some cards mishandle the status bits, so make sure to check both the
+	 * busy indication and the card state.
+	 */
+	return status & R1_READY_FOR_DATA &&
+	       (R1_CURRENT_STATE(status) == R1_STATE_TRAN);
+}
+
+static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
+			    u32 *resp_errs)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+	int err = 0;
+	u32 status;
+
+	do {
+		bool done = time_after(jiffies, timeout);
+
+		err = __mmc_send_status(card, &status, 5);
+		if (err) {
+			dev_err(mmc_dev(card->host),
+				"error %d requesting status\n", err);
+			return err;
+		}
+
+		/* Accumulate any response error bits seen */
+		if (resp_errs)
+			*resp_errs |= status;
+
+		/*
+		 * Timeout if the device never becomes ready for data and never
+		 * leaves the program state.
+		 */
+		if (done) {
+			dev_err(mmc_dev(card->host),
+				"Card stuck in wrong state! %s status: %#x\n",
+				 __func__, status);
+			return -ETIMEDOUT;
+		}
+
+		/*
+		 * Some cards mishandle the status bits,
+		 * so make sure to check both the busy
+		 * indication and the card state.
+		 */
+	} while (!mmc_blk_in_tran_state(status));
+
+	return err;
+}
+
 static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 			       struct mmc_blk_ioc_data *idata)
 {
@@ -623,6 +675,9 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 					__func__, status, err);
 	}
 
+	if (!err && (cmd.flags & MMC_RSP_R1B))
+		err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, NULL);
+
 	return err;
 }
 
@@ -970,58 +1025,6 @@ static unsigned int mmc_blk_data_timeout_ms(struct mmc_host *host,
 	return ms;
 }
 
-static inline bool mmc_blk_in_tran_state(u32 status)
-{
-	/*
-	 * Some cards mishandle the status bits, so make sure to check both the
-	 * busy indication and the card state.
-	 */
-	return status & R1_READY_FOR_DATA &&
-	       (R1_CURRENT_STATE(status) == R1_STATE_TRAN);
-}
-
-static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
-			    u32 *resp_errs)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
-	int err = 0;
-	u32 status;
-
-	do {
-		bool done = time_after(jiffies, timeout);
-
-		err = __mmc_send_status(card, &status, 5);
-		if (err) {
-			dev_err(mmc_dev(card->host),
-				"error %d requesting status\n", err);
-			return err;
-		}
-
-		/* Accumulate any response error bits seen */
-		if (resp_errs)
-			*resp_errs |= status;
-
-		/*
-		 * Timeout if the device never becomes ready for data and never
-		 * leaves the program state.
-		 */
-		if (done) {
-			dev_err(mmc_dev(card->host),
-				"Card stuck in wrong state! %s status: %#x\n",
-				 __func__, status);
-			return -ETIMEDOUT;
-		}
-
-		/*
-		 * Some cards mishandle the status bits,
-		 * so make sure to check both the busy
-		 * indication and the card state.
-		 */
-	} while (!mmc_blk_in_tran_state(status));
-
-	return err;
-}
-
 static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host,
 			 int type)
 {
-- 
2.18.0