From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
Kevin Hilman <khilman@baylibre.com>
Subject: [PATCH 6/8] ASoC: meson: axg-frddr: add sm1 support
Date: Thu, 5 Sep 2019 14:01:18 +0200 [thread overview]
Message-ID: <20190905120120.31752-7-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190905120120.31752-1-jbrunet@baylibre.com>
On sm1, the output routing bits have moved to CTRL2 register
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-fifo.c | 2 +-
sound/soc/meson/axg-fifo.h | 1 +
sound/soc/meson/axg-frddr.c | 73 +++++++++++++++++++++++++++++++++++++
3 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 80a3dde35b5c..5a3749938900 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -306,7 +306,7 @@ static const struct regmap_config axg_fifo_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
- .max_register = FIFO_INIT_ADDR,
+ .max_register = FIFO_CTRL2,
};
int axg_fifo_probe(struct platform_device *pdev)
diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h
index 5caf81241dfe..bb1e2ce50256 100644
--- a/sound/soc/meson/axg-fifo.h
+++ b/sound/soc/meson/axg-fifo.h
@@ -61,6 +61,7 @@ struct snd_soc_pcm_runtime;
#define STATUS1_INT_STS(x) ((x) << 0)
#define FIFO_STATUS2 0x18
#define FIFO_INIT_ADDR 0x24
+#define FIFO_CTRL2 0x28
struct axg_fifo {
struct regmap *map;
diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c
index 0968e8375000..6ab111c31b28 100644
--- a/sound/soc/meson/axg-frddr.c
+++ b/sound/soc/meson/axg-frddr.c
@@ -23,6 +23,12 @@
#define CTRL0_SEL3_SHIFT 8
#define CTRL0_SEL3_EN_SHIFT 11
#define CTRL1_FRDDR_FORCE_FINISH BIT(12)
+#define CTRL2_SEL1_SHIFT 0
+#define CTRL2_SEL1_EN_SHIFT 4
+#define CTRL2_SEL2_SHIFT 8
+#define CTRL2_SEL2_EN_SHIFT 12
+#define CTRL2_SEL3_SHIFT 16
+#define CTRL2_SEL3_EN_SHIFT 20
static int g12a_frddr_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
@@ -269,6 +275,70 @@ static const struct axg_fifo_match_data g12a_frddr_match_data = {
.dai_drv = &g12a_frddr_dai_drv
};
+/* On SM1, the output selection in on CTRL2 */
+static const struct snd_kcontrol_new sm1_frddr_out1_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL1_EN_SHIFT, 1, 0);
+static const struct snd_kcontrol_new sm1_frddr_out2_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL2_EN_SHIFT, 1, 0);
+static const struct snd_kcontrol_new sm1_frddr_out3_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL3_EN_SHIFT, 1, 0);
+
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel1_enum, FIFO_CTRL2, CTRL2_SEL1_SHIFT,
+ axg_frddr_sel_texts);
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel2_enum, FIFO_CTRL2, CTRL2_SEL2_SHIFT,
+ axg_frddr_sel_texts);
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel3_enum, FIFO_CTRL2, CTRL2_SEL3_SHIFT,
+ axg_frddr_sel_texts);
+
+static const struct snd_kcontrol_new sm1_frddr_out1_demux =
+ SOC_DAPM_ENUM("Output Src 1", sm1_frddr_sel1_enum);
+static const struct snd_kcontrol_new sm1_frddr_out2_demux =
+ SOC_DAPM_ENUM("Output Src 2", sm1_frddr_sel2_enum);
+static const struct snd_kcontrol_new sm1_frddr_out3_demux =
+ SOC_DAPM_ENUM("Output Src 3", sm1_frddr_sel3_enum);
+
+static const struct snd_soc_dapm_widget sm1_frddr_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_OUT("SRC 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SRC 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SRC 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SWITCH("SRC 1 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out1_enable),
+ SND_SOC_DAPM_SWITCH("SRC 2 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out2_enable),
+ SND_SOC_DAPM_SWITCH("SRC 3 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out3_enable),
+ SND_SOC_DAPM_DEMUX("SINK 1 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out1_demux),
+ SND_SOC_DAPM_DEMUX("SINK 2 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out2_demux),
+ SND_SOC_DAPM_DEMUX("SINK 3 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out3_demux),
+ SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_component_driver sm1_frddr_component_drv = {
+ .dapm_widgets = sm1_frddr_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sm1_frddr_dapm_widgets),
+ .dapm_routes = g12a_frddr_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(g12a_frddr_dapm_routes),
+ .ops = &g12a_fifo_pcm_ops
+};
+
+static const struct axg_fifo_match_data sm1_frddr_match_data = {
+ .component_drv = &sm1_frddr_component_drv,
+ .dai_drv = &g12a_frddr_dai_drv
+};
+
static const struct of_device_id axg_frddr_of_match[] = {
{
.compatible = "amlogic,axg-frddr",
@@ -276,6 +346,9 @@ static const struct of_device_id axg_frddr_of_match[] = {
}, {
.compatible = "amlogic,g12a-frddr",
.data = &g12a_frddr_match_data,
+ }, {
+ .compatible = "amlogic,sm1-frddr",
+ .data = &sm1_frddr_match_data,
}, {}
};
MODULE_DEVICE_TABLE(of, axg_frddr_of_match);
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
Kevin Hilman <khilman@baylibre.com>,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [alsa-devel] [PATCH 6/8] ASoC: meson: axg-frddr: add sm1 support
Date: Thu, 5 Sep 2019 14:01:18 +0200 [thread overview]
Message-ID: <20190905120120.31752-7-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190905120120.31752-1-jbrunet@baylibre.com>
On sm1, the output routing bits have moved to CTRL2 register
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-fifo.c | 2 +-
sound/soc/meson/axg-fifo.h | 1 +
sound/soc/meson/axg-frddr.c | 73 +++++++++++++++++++++++++++++++++++++
3 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 80a3dde35b5c..5a3749938900 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -306,7 +306,7 @@ static const struct regmap_config axg_fifo_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
- .max_register = FIFO_INIT_ADDR,
+ .max_register = FIFO_CTRL2,
};
int axg_fifo_probe(struct platform_device *pdev)
diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h
index 5caf81241dfe..bb1e2ce50256 100644
--- a/sound/soc/meson/axg-fifo.h
+++ b/sound/soc/meson/axg-fifo.h
@@ -61,6 +61,7 @@ struct snd_soc_pcm_runtime;
#define STATUS1_INT_STS(x) ((x) << 0)
#define FIFO_STATUS2 0x18
#define FIFO_INIT_ADDR 0x24
+#define FIFO_CTRL2 0x28
struct axg_fifo {
struct regmap *map;
diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c
index 0968e8375000..6ab111c31b28 100644
--- a/sound/soc/meson/axg-frddr.c
+++ b/sound/soc/meson/axg-frddr.c
@@ -23,6 +23,12 @@
#define CTRL0_SEL3_SHIFT 8
#define CTRL0_SEL3_EN_SHIFT 11
#define CTRL1_FRDDR_FORCE_FINISH BIT(12)
+#define CTRL2_SEL1_SHIFT 0
+#define CTRL2_SEL1_EN_SHIFT 4
+#define CTRL2_SEL2_SHIFT 8
+#define CTRL2_SEL2_EN_SHIFT 12
+#define CTRL2_SEL3_SHIFT 16
+#define CTRL2_SEL3_EN_SHIFT 20
static int g12a_frddr_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
@@ -269,6 +275,70 @@ static const struct axg_fifo_match_data g12a_frddr_match_data = {
.dai_drv = &g12a_frddr_dai_drv
};
+/* On SM1, the output selection in on CTRL2 */
+static const struct snd_kcontrol_new sm1_frddr_out1_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL1_EN_SHIFT, 1, 0);
+static const struct snd_kcontrol_new sm1_frddr_out2_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL2_EN_SHIFT, 1, 0);
+static const struct snd_kcontrol_new sm1_frddr_out3_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL3_EN_SHIFT, 1, 0);
+
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel1_enum, FIFO_CTRL2, CTRL2_SEL1_SHIFT,
+ axg_frddr_sel_texts);
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel2_enum, FIFO_CTRL2, CTRL2_SEL2_SHIFT,
+ axg_frddr_sel_texts);
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel3_enum, FIFO_CTRL2, CTRL2_SEL3_SHIFT,
+ axg_frddr_sel_texts);
+
+static const struct snd_kcontrol_new sm1_frddr_out1_demux =
+ SOC_DAPM_ENUM("Output Src 1", sm1_frddr_sel1_enum);
+static const struct snd_kcontrol_new sm1_frddr_out2_demux =
+ SOC_DAPM_ENUM("Output Src 2", sm1_frddr_sel2_enum);
+static const struct snd_kcontrol_new sm1_frddr_out3_demux =
+ SOC_DAPM_ENUM("Output Src 3", sm1_frddr_sel3_enum);
+
+static const struct snd_soc_dapm_widget sm1_frddr_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_OUT("SRC 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SRC 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SRC 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SWITCH("SRC 1 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out1_enable),
+ SND_SOC_DAPM_SWITCH("SRC 2 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out2_enable),
+ SND_SOC_DAPM_SWITCH("SRC 3 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out3_enable),
+ SND_SOC_DAPM_DEMUX("SINK 1 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out1_demux),
+ SND_SOC_DAPM_DEMUX("SINK 2 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out2_demux),
+ SND_SOC_DAPM_DEMUX("SINK 3 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out3_demux),
+ SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_component_driver sm1_frddr_component_drv = {
+ .dapm_widgets = sm1_frddr_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sm1_frddr_dapm_widgets),
+ .dapm_routes = g12a_frddr_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(g12a_frddr_dapm_routes),
+ .ops = &g12a_fifo_pcm_ops
+};
+
+static const struct axg_fifo_match_data sm1_frddr_match_data = {
+ .component_drv = &sm1_frddr_component_drv,
+ .dai_drv = &g12a_frddr_dai_drv
+};
+
static const struct of_device_id axg_frddr_of_match[] = {
{
.compatible = "amlogic,axg-frddr",
@@ -276,6 +346,9 @@ static const struct of_device_id axg_frddr_of_match[] = {
}, {
.compatible = "amlogic,g12a-frddr",
.data = &g12a_frddr_match_data,
+ }, {
+ .compatible = "amlogic,sm1-frddr",
+ .data = &sm1_frddr_match_data,
}, {}
};
MODULE_DEVICE_TABLE(of, axg_frddr_of_match);
--
2.21.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
Kevin Hilman <khilman@baylibre.com>,
linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 6/8] ASoC: meson: axg-frddr: add sm1 support
Date: Thu, 5 Sep 2019 14:01:18 +0200 [thread overview]
Message-ID: <20190905120120.31752-7-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190905120120.31752-1-jbrunet@baylibre.com>
On sm1, the output routing bits have moved to CTRL2 register
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-fifo.c | 2 +-
sound/soc/meson/axg-fifo.h | 1 +
sound/soc/meson/axg-frddr.c | 73 +++++++++++++++++++++++++++++++++++++
3 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 80a3dde35b5c..5a3749938900 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -306,7 +306,7 @@ static const struct regmap_config axg_fifo_regmap_cfg = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
- .max_register = FIFO_INIT_ADDR,
+ .max_register = FIFO_CTRL2,
};
int axg_fifo_probe(struct platform_device *pdev)
diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h
index 5caf81241dfe..bb1e2ce50256 100644
--- a/sound/soc/meson/axg-fifo.h
+++ b/sound/soc/meson/axg-fifo.h
@@ -61,6 +61,7 @@ struct snd_soc_pcm_runtime;
#define STATUS1_INT_STS(x) ((x) << 0)
#define FIFO_STATUS2 0x18
#define FIFO_INIT_ADDR 0x24
+#define FIFO_CTRL2 0x28
struct axg_fifo {
struct regmap *map;
diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c
index 0968e8375000..6ab111c31b28 100644
--- a/sound/soc/meson/axg-frddr.c
+++ b/sound/soc/meson/axg-frddr.c
@@ -23,6 +23,12 @@
#define CTRL0_SEL3_SHIFT 8
#define CTRL0_SEL3_EN_SHIFT 11
#define CTRL1_FRDDR_FORCE_FINISH BIT(12)
+#define CTRL2_SEL1_SHIFT 0
+#define CTRL2_SEL1_EN_SHIFT 4
+#define CTRL2_SEL2_SHIFT 8
+#define CTRL2_SEL2_EN_SHIFT 12
+#define CTRL2_SEL3_SHIFT 16
+#define CTRL2_SEL3_EN_SHIFT 20
static int g12a_frddr_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
@@ -269,6 +275,70 @@ static const struct axg_fifo_match_data g12a_frddr_match_data = {
.dai_drv = &g12a_frddr_dai_drv
};
+/* On SM1, the output selection in on CTRL2 */
+static const struct snd_kcontrol_new sm1_frddr_out1_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL1_EN_SHIFT, 1, 0);
+static const struct snd_kcontrol_new sm1_frddr_out2_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL2_EN_SHIFT, 1, 0);
+static const struct snd_kcontrol_new sm1_frddr_out3_enable =
+ SOC_DAPM_SINGLE_AUTODISABLE("Switch", FIFO_CTRL2,
+ CTRL2_SEL3_EN_SHIFT, 1, 0);
+
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel1_enum, FIFO_CTRL2, CTRL2_SEL1_SHIFT,
+ axg_frddr_sel_texts);
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel2_enum, FIFO_CTRL2, CTRL2_SEL2_SHIFT,
+ axg_frddr_sel_texts);
+static SOC_ENUM_SINGLE_DECL(sm1_frddr_sel3_enum, FIFO_CTRL2, CTRL2_SEL3_SHIFT,
+ axg_frddr_sel_texts);
+
+static const struct snd_kcontrol_new sm1_frddr_out1_demux =
+ SOC_DAPM_ENUM("Output Src 1", sm1_frddr_sel1_enum);
+static const struct snd_kcontrol_new sm1_frddr_out2_demux =
+ SOC_DAPM_ENUM("Output Src 2", sm1_frddr_sel2_enum);
+static const struct snd_kcontrol_new sm1_frddr_out3_demux =
+ SOC_DAPM_ENUM("Output Src 3", sm1_frddr_sel3_enum);
+
+static const struct snd_soc_dapm_widget sm1_frddr_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_OUT("SRC 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SRC 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SRC 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SWITCH("SRC 1 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out1_enable),
+ SND_SOC_DAPM_SWITCH("SRC 2 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out2_enable),
+ SND_SOC_DAPM_SWITCH("SRC 3 EN", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out3_enable),
+ SND_SOC_DAPM_DEMUX("SINK 1 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out1_demux),
+ SND_SOC_DAPM_DEMUX("SINK 2 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out2_demux),
+ SND_SOC_DAPM_DEMUX("SINK 3 SEL", SND_SOC_NOPM, 0, 0,
+ &sm1_frddr_out3_demux),
+ SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 4", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 5", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 6", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("OUT 7", NULL, 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_component_driver sm1_frddr_component_drv = {
+ .dapm_widgets = sm1_frddr_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sm1_frddr_dapm_widgets),
+ .dapm_routes = g12a_frddr_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(g12a_frddr_dapm_routes),
+ .ops = &g12a_fifo_pcm_ops
+};
+
+static const struct axg_fifo_match_data sm1_frddr_match_data = {
+ .component_drv = &sm1_frddr_component_drv,
+ .dai_drv = &g12a_frddr_dai_drv
+};
+
static const struct of_device_id axg_frddr_of_match[] = {
{
.compatible = "amlogic,axg-frddr",
@@ -276,6 +346,9 @@ static const struct of_device_id axg_frddr_of_match[] = {
}, {
.compatible = "amlogic,g12a-frddr",
.data = &g12a_frddr_match_data,
+ }, {
+ .compatible = "amlogic,sm1-frddr",
+ .data = &sm1_frddr_match_data,
}, {}
};
MODULE_DEVICE_TABLE(of, axg_frddr_of_match);
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-09-05 12:01 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 12:01 [PATCH 0/8] ASoC: meson: add sm1 support Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 12:01 ` [PATCH 1/8] ASoC: meson: add sm1 compatibles Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: add sm1 compatibles" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 12:01 ` [PATCH 2/8] ASoC: meson: add reset binding Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: add reset binding" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 12:01 ` [PATCH 3/8] ASoC: meson: axg-frddr: expose all 8 outputs Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-frddr: expose all 8 outputs" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 12:01 ` [PATCH 4/8] ASoC: meson: axg-toddr: expose all 8 inputs Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-toddr: expose all 8 inputs" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 12:01 ` [PATCH 5/8] ASoC: meson: tdmin: expose all 16 inputs Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: tdmin: expose all 16 inputs" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 12:01 ` Jerome Brunet [this message]
2019-09-05 12:01 ` [PATCH 6/8] ASoC: meson: axg-frddr: add sm1 support Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-frddr: add sm1 support" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 12:01 ` [PATCH 7/8] ASoC: meson: axg-toddr: add sm1 support Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: axg-toddr: add sm1 support" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 12:01 ` [PATCH 8/8] ASoC: meson: tdmout: add sm1 support Jerome Brunet
2019-09-05 12:01 ` Jerome Brunet
2019-09-05 12:01 ` [alsa-devel] " Jerome Brunet
2019-09-05 17:38 ` Applied "ASoC: meson: tdmout: add sm1 support" to the asoc tree Mark Brown
2019-09-05 17:38 ` Mark Brown
2019-09-05 17:38 ` [alsa-devel] " Mark Brown
2019-09-05 17:38 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190905120120.31752-7-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.