[PATCH v2 6/6] drm/i915/display/icl: In port sync mode disable slaves first then master

[Manasi Navare <manasi.d.navare@intel.com>]

In the transcoder port sync mode, the slave transcoders mask their vblanks
until master transcoder's vblank so while disabling them, make
sure slaves are disabled first and then the masters.

v4:
* Obtain slave state from master (Maarten)
v3:
* Rebase
v2:
* Use the intel_old_crtc_state_disables() helper

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 62 ++++++++++++++++++--
 1 file changed, 56 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index ac6e880570ea..8c333280d8f5 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -14074,8 +14074,42 @@ static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
 						     new_crtc_state);
 }
 
+static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state *state,
+						   struct intel_crtc *crtc,
+						   struct intel_crtc_state *old_crtc_state,
+						   struct intel_crtc_state *new_crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_crtc *slave_crtc = intel_get_slave_crtc(dev_priv,
+							     new_crtc_state);
+	struct intel_crtc_state *new_slave_crtc_state =
+		intel_atomic_get_new_crtc_state(state, slave_crtc);
+	struct intel_crtc_state *old_slave_crtc_state =
+		intel_atomic_get_old_crtc_state(state, slave_crtc);
+
+	WARN_ON(!slave_crtc || !new_slave_crtc_state ||
+		!old_slave_crtc_state);
+
+	/* Disable Slave first */
+	intel_pre_plane_update(old_slave_crtc_state, new_slave_crtc_state);
+	if (old_slave_crtc_state->base.active)
+		intel_old_crtc_state_disables(state,
+					      old_slave_crtc_state,
+					      new_slave_crtc_state,
+					      slave_crtc);
+
+	/* Disable Master */
+	intel_pre_plane_update(old_crtc_state, new_crtc_state);
+	if (old_crtc_state->base.active)
+		intel_old_crtc_state_disables(state,
+					      old_crtc_state,
+					      new_crtc_state,
+					      crtc);
+}
+
 static void intel_commit_modeset_disables(struct intel_atomic_state *state)
 {
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
 	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
 	struct intel_crtc *crtc;
 	int i;
@@ -14092,13 +14126,29 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
 		if (!needs_modeset(new_crtc_state))
 			continue;
 
-		intel_pre_plane_update(old_crtc_state, new_crtc_state);
+		/* In case of Transcoder port Sync master slave CRTCs can be
+		 * assigned in any order and we need to make sure that
+		 * slave CRTCs are disabled first and then master CRTC since
+		 * Slave vblanks are masked till Master Vblanks.
+		 */
+		if (is_trans_port_sync_mode(dev_priv, new_crtc_state)) {
+			if (is_trans_port_sync_master(dev_priv,
+						      new_crtc_state))
+				intel_trans_port_sync_modeset_disables(state,
+								       crtc,
+								       old_crtc_state,
+								       new_crtc_state);
+			else
+				continue;
+		} else {
+			intel_pre_plane_update(old_crtc_state, new_crtc_state);
 
-		if (old_crtc_state->base.active)
-			intel_old_crtc_state_disables(state,
-						      old_crtc_state,
-						      new_crtc_state,
-						      crtc);
+			if (old_crtc_state->base.active)
+				intel_old_crtc_state_disables(state,
+							      old_crtc_state,
+							      new_crtc_state,
+							      crtc);
+		}
 	}
 }
 
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx