All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cheng-Yi Chiang <cychiang@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com, airlied@linux.ie,
	daniel@ffwll.ch, kuninori.morimoto.gx@renesas.com,
	sam@ravnborg.org, cychiang@chromium.org, dianders@chromium.org,
	dgreid@chromium.org, tzungbi@chromium.org,
	zhengxing@rock-chips.com, cain.cai@rock-chips.com,
	eddie.cai@rock-chips.com, jeffy.chen@rock-chips.com,
	kuankuan.y@gmail.com, enric.balletbo@collabora.com,
	dri-devel@lists.freedesktop.org,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Jonas Karlman <jonas@kwiboo.se>, Yakir Yang <ykk@rock-chips.com>
Subject: [PATCH v3] drm: bridge/dw_hdmi: add audio sample channel status setting
Date: Wed, 11 Sep 2019 16:26:46 +0800	[thread overview]
Message-ID: <20190911082646.134347-1-cychiang@chromium.org> (raw)

From: Yakir Yang <ykk@rock-chips.com>

When transmitting IEC60985 linear PCM audio, we configure the
Aduio Sample Channel Status information in the IEC60958 frame.
The status bit is already available in iec.status of hdmi_codec_params.

This fix the issue that audio does not come out on some monitors
(e.g. LG 22CV241)

Note that these registers are only for interfaces:
I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA
(AHBAUDDMA).
For S/PDIF interface this information comes from the stream.

Currently this function dw_hdmi_set_channel_status is only called
from dw-hdmi-i2s-audio in I2S setup.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
---

Change from v2 to v3:
1. Reuse what is already set in iec.status in hw_param.
2. Remove all useless definition of registers and values.
3. Note that the original sampling frequency is not written to
   the channel status as we reuse create_iec958_consumer in pcm_iec958.c.
   Without that it can still play audio fine.

 .../drm/bridge/synopsys/dw-hdmi-i2s-audio.c   |  1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c     | 20 +++++++++++++++++++
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h     |  2 ++
 include/drm/bridge/dw_hdmi.h                  |  1 +
 4 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 34d8e837555f..20f4f92dd866 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -102,6 +102,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	}
 
 	dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate);
+	dw_hdmi_set_channel_status(hdmi, hparms->iec.status);
 	dw_hdmi_set_channel_count(hdmi, hparms->channels);
 	dw_hdmi_set_channel_allocation(hdmi, hparms->cea.channel_allocation);
 
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index bd65d0479683..aa7efd4da1c8 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -582,6 +582,26 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
 	return n;
 }
 
+/*
+ * When transmitting IEC60958 linear PCM audio, these registers allow to
+ * configure the channel status information of all the channel status
+ * bits in the IEC60958 frame. For the moment this configuration is only
+ * used when the I2S audio interface, General Purpose Audio (GPA),
+ * or AHB audio DMA (AHBAUDDMA) interface is active
+ * (for S/PDIF interface this information comes from the stream).
+ */
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi,
+				u8 *channel_status)
+{
+	/*
+	 * Set channel status register for frequency and word length.
+	 * Use default values for other registers.
+	 */
+	hdmi_writeb(hdmi, channel_status[3], HDMI_FC_AUDSCHNLS7);
+	hdmi_writeb(hdmi, channel_status[4], HDMI_FC_AUDSCHNLS8);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_status);
+
 static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
 	unsigned long pixel_clk, unsigned int sample_rate)
 {
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index 6988f12d89d9..fcff5059db24 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -158,6 +158,8 @@
 #define HDMI_FC_SPDDEVICEINF                    0x1062
 #define HDMI_FC_AUDSCONF                        0x1063
 #define HDMI_FC_AUDSSTAT                        0x1064
+#define HDMI_FC_AUDSCHNLS7                      0x106e
+#define HDMI_FC_AUDSCHNLS8                      0x106f
 #define HDMI_FC_DATACH0FILL                     0x1070
 #define HDMI_FC_DATACH1FILL                     0x1071
 #define HDMI_FC_DATACH2FILL                     0x1072
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index cf528c289857..4b3e863c4f8a 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -156,6 +156,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense);
 
 void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
 void dw_hdmi_set_channel_count(struct dw_hdmi *hdmi, unsigned int cnt);
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi, u8 *channel_status);
 void dw_hdmi_set_channel_allocation(struct dw_hdmi *hdmi, unsigned int ca);
 void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
 void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
-- 
2.23.0.162.g0b9fbb3734-goog


WARNING: multiple messages have this Message-ID (diff)
From: Cheng-Yi Chiang <cychiang@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org, kuninori.morimoto.gx@renesas.com,
	Neil Armstrong <narmstrong@baylibre.com>,
	airlied@linux.ie, dri-devel@lists.freedesktop.org,
	cain.cai@rock-chips.com, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com,
	Yakir Yang <ykk@rock-chips.com>,
	sam@ravnborg.org, Jerome Brunet <jbrunet@baylibre.com>,
	zhengxing@rock-chips.com, linux-rockchip@lists.infradead.org,
	dgreid@chromium.org, cychiang@chromium.org, tzungbi@chromium.org,
	Jonas Karlman <jonas@kwiboo.se>,
	jeffy.chen@rock-chips.com, eddie.cai@rock-chips.com,
	linux-arm-kernel@lists.infradead.org,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	dianders@chromium.org, daniel@ffwll.ch,
	enric.balletbo@collabora.com, kuankuan.y@gmail.com
Subject: [alsa-devel] [PATCH v3] drm: bridge/dw_hdmi: add audio sample channel status setting
Date: Wed, 11 Sep 2019 16:26:46 +0800	[thread overview]
Message-ID: <20190911082646.134347-1-cychiang@chromium.org> (raw)

From: Yakir Yang <ykk@rock-chips.com>

When transmitting IEC60985 linear PCM audio, we configure the
Aduio Sample Channel Status information in the IEC60958 frame.
The status bit is already available in iec.status of hdmi_codec_params.

This fix the issue that audio does not come out on some monitors
(e.g. LG 22CV241)

Note that these registers are only for interfaces:
I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA
(AHBAUDDMA).
For S/PDIF interface this information comes from the stream.

Currently this function dw_hdmi_set_channel_status is only called
from dw-hdmi-i2s-audio in I2S setup.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
---

Change from v2 to v3:
1. Reuse what is already set in iec.status in hw_param.
2. Remove all useless definition of registers and values.
3. Note that the original sampling frequency is not written to
   the channel status as we reuse create_iec958_consumer in pcm_iec958.c.
   Without that it can still play audio fine.

 .../drm/bridge/synopsys/dw-hdmi-i2s-audio.c   |  1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c     | 20 +++++++++++++++++++
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h     |  2 ++
 include/drm/bridge/dw_hdmi.h                  |  1 +
 4 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 34d8e837555f..20f4f92dd866 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -102,6 +102,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	}
 
 	dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate);
+	dw_hdmi_set_channel_status(hdmi, hparms->iec.status);
 	dw_hdmi_set_channel_count(hdmi, hparms->channels);
 	dw_hdmi_set_channel_allocation(hdmi, hparms->cea.channel_allocation);
 
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index bd65d0479683..aa7efd4da1c8 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -582,6 +582,26 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
 	return n;
 }
 
+/*
+ * When transmitting IEC60958 linear PCM audio, these registers allow to
+ * configure the channel status information of all the channel status
+ * bits in the IEC60958 frame. For the moment this configuration is only
+ * used when the I2S audio interface, General Purpose Audio (GPA),
+ * or AHB audio DMA (AHBAUDDMA) interface is active
+ * (for S/PDIF interface this information comes from the stream).
+ */
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi,
+				u8 *channel_status)
+{
+	/*
+	 * Set channel status register for frequency and word length.
+	 * Use default values for other registers.
+	 */
+	hdmi_writeb(hdmi, channel_status[3], HDMI_FC_AUDSCHNLS7);
+	hdmi_writeb(hdmi, channel_status[4], HDMI_FC_AUDSCHNLS8);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_status);
+
 static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
 	unsigned long pixel_clk, unsigned int sample_rate)
 {
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index 6988f12d89d9..fcff5059db24 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -158,6 +158,8 @@
 #define HDMI_FC_SPDDEVICEINF                    0x1062
 #define HDMI_FC_AUDSCONF                        0x1063
 #define HDMI_FC_AUDSSTAT                        0x1064
+#define HDMI_FC_AUDSCHNLS7                      0x106e
+#define HDMI_FC_AUDSCHNLS8                      0x106f
 #define HDMI_FC_DATACH0FILL                     0x1070
 #define HDMI_FC_DATACH1FILL                     0x1071
 #define HDMI_FC_DATACH2FILL                     0x1072
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index cf528c289857..4b3e863c4f8a 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -156,6 +156,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense);
 
 void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
 void dw_hdmi_set_channel_count(struct dw_hdmi *hdmi, unsigned int cnt);
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi, u8 *channel_status);
 void dw_hdmi_set_channel_allocation(struct dw_hdmi *hdmi, unsigned int ca);
 void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
 void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
-- 
2.23.0.162.g0b9fbb3734-goog

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

WARNING: multiple messages have this Message-ID (diff)
From: Cheng-Yi Chiang <cychiang@chromium.org>
To: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org, kuninori.morimoto.gx@renesas.com,
	Neil Armstrong <narmstrong@baylibre.com>,
	airlied@linux.ie, dri-devel@lists.freedesktop.org,
	cain.cai@rock-chips.com, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com,
	Yakir Yang <ykk@rock-chips.com>,
	sam@ravnborg.org, Jerome Brunet <jbrunet@baylibre.com>,
	zhengxing@rock-chips.com, linux-rockchip@lists.infradead.org,
	dgreid@chromium.org, cychiang@chromium.org, tzungbi@chromium.org,
	Jonas Karlman <jonas@kwiboo.se>,
	jeffy.chen@rock-chips.com, eddie.cai@rock-chips.com,
	linux-arm-kernel@lists.infradead.org,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	dianders@chromium.org, daniel@ffwll.ch,
	enric.balletbo@collabora.com, kuankuan.y@gmail.com
Subject: [PATCH v3] drm: bridge/dw_hdmi: add audio sample channel status setting
Date: Wed, 11 Sep 2019 16:26:46 +0800	[thread overview]
Message-ID: <20190911082646.134347-1-cychiang@chromium.org> (raw)

From: Yakir Yang <ykk@rock-chips.com>

When transmitting IEC60985 linear PCM audio, we configure the
Aduio Sample Channel Status information in the IEC60958 frame.
The status bit is already available in iec.status of hdmi_codec_params.

This fix the issue that audio does not come out on some monitors
(e.g. LG 22CV241)

Note that these registers are only for interfaces:
I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA
(AHBAUDDMA).
For S/PDIF interface this information comes from the stream.

Currently this function dw_hdmi_set_channel_status is only called
from dw-hdmi-i2s-audio in I2S setup.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
---

Change from v2 to v3:
1. Reuse what is already set in iec.status in hw_param.
2. Remove all useless definition of registers and values.
3. Note that the original sampling frequency is not written to
   the channel status as we reuse create_iec958_consumer in pcm_iec958.c.
   Without that it can still play audio fine.

 .../drm/bridge/synopsys/dw-hdmi-i2s-audio.c   |  1 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c     | 20 +++++++++++++++++++
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h     |  2 ++
 include/drm/bridge/dw_hdmi.h                  |  1 +
 4 files changed, 24 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 34d8e837555f..20f4f92dd866 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -102,6 +102,7 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	}
 
 	dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate);
+	dw_hdmi_set_channel_status(hdmi, hparms->iec.status);
 	dw_hdmi_set_channel_count(hdmi, hparms->channels);
 	dw_hdmi_set_channel_allocation(hdmi, hparms->cea.channel_allocation);
 
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index bd65d0479683..aa7efd4da1c8 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -582,6 +582,26 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
 	return n;
 }
 
+/*
+ * When transmitting IEC60958 linear PCM audio, these registers allow to
+ * configure the channel status information of all the channel status
+ * bits in the IEC60958 frame. For the moment this configuration is only
+ * used when the I2S audio interface, General Purpose Audio (GPA),
+ * or AHB audio DMA (AHBAUDDMA) interface is active
+ * (for S/PDIF interface this information comes from the stream).
+ */
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi,
+				u8 *channel_status)
+{
+	/*
+	 * Set channel status register for frequency and word length.
+	 * Use default values for other registers.
+	 */
+	hdmi_writeb(hdmi, channel_status[3], HDMI_FC_AUDSCHNLS7);
+	hdmi_writeb(hdmi, channel_status[4], HDMI_FC_AUDSCHNLS8);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_set_channel_status);
+
 static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
 	unsigned long pixel_clk, unsigned int sample_rate)
 {
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index 6988f12d89d9..fcff5059db24 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -158,6 +158,8 @@
 #define HDMI_FC_SPDDEVICEINF                    0x1062
 #define HDMI_FC_AUDSCONF                        0x1063
 #define HDMI_FC_AUDSSTAT                        0x1064
+#define HDMI_FC_AUDSCHNLS7                      0x106e
+#define HDMI_FC_AUDSCHNLS8                      0x106f
 #define HDMI_FC_DATACH0FILL                     0x1070
 #define HDMI_FC_DATACH1FILL                     0x1071
 #define HDMI_FC_DATACH2FILL                     0x1072
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index cf528c289857..4b3e863c4f8a 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -156,6 +156,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense);
 
 void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
 void dw_hdmi_set_channel_count(struct dw_hdmi *hdmi, unsigned int cnt);
+void dw_hdmi_set_channel_status(struct dw_hdmi *hdmi, u8 *channel_status);
 void dw_hdmi_set_channel_allocation(struct dw_hdmi *hdmi, unsigned int ca);
 void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
 void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
-- 
2.23.0.162.g0b9fbb3734-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-09-11  8:26 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-11  8:26 Cheng-Yi Chiang [this message]
2019-09-11  8:26 ` [PATCH v3] drm: bridge/dw_hdmi: add audio sample channel status setting Cheng-Yi Chiang
2019-09-11  8:26 ` [alsa-devel] " Cheng-Yi Chiang
2019-09-11 16:23 ` Neil Armstrong
2019-09-11 16:23   ` Neil Armstrong
2019-09-11 16:23   ` Neil Armstrong
2019-09-11 16:23   ` [alsa-devel] " Neil Armstrong
2019-09-11 16:54   ` Jernej Škrabec
2019-09-11 16:54     ` Jernej Škrabec
2019-09-11 16:54     ` [alsa-devel] " Jernej Škrabec
2019-09-11 17:02     ` Cheng-yi Chiang
2019-09-11 17:02       ` Cheng-yi Chiang
2019-09-11 17:02       ` Cheng-yi Chiang
2019-09-11 17:02       ` [alsa-devel] " Cheng-yi Chiang
2019-09-12 15:25       ` Jernej Škrabec
2019-09-12 15:25         ` Jernej Škrabec
2019-09-12 15:25         ` Jernej Škrabec
2019-09-12 15:25         ` [alsa-devel] " Jernej Škrabec
2019-09-13  6:37       ` Jonas Karlman
2019-09-13  6:37         ` Jonas Karlman
2019-09-13  6:37         ` Jonas Karlman
2019-09-13  6:37         ` [alsa-devel] " Jonas Karlman
2019-09-13  8:46         ` Neil Armstrong
2019-09-13  8:46           ` Neil Armstrong
2019-09-13  8:46           ` Neil Armstrong
2019-09-13  8:46           ` [alsa-devel] " Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190911082646.134347-1-cychiang@chromium.org \
    --to=cychiang@chromium.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=alsa-devel@alsa-project.org \
    --cc=cain.cai@rock-chips.com \
    --cc=daniel@ffwll.ch \
    --cc=dgreid@chromium.org \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eddie.cai@rock-chips.com \
    --cc=enric.balletbo@collabora.com \
    --cc=jbrunet@baylibre.com \
    --cc=jeffy.chen@rock-chips.com \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=kuankuan.y@gmail.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=narmstrong@baylibre.com \
    --cc=sam@ravnborg.org \
    --cc=tzungbi@chromium.org \
    --cc=ykk@rock-chips.com \
    --cc=zhengxing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.