From: Jitao Shi <jitao.shi@mediatek.com> To: Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>, "Daniel Vetter" <daniel@ffwll.ch>, <dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org> Cc: <srv_heupstream@mediatek.com>, <yingjoe.chen@mediatek.com>, <eddie.huang@mediatek.com>, <cawa.cheng@mediatek.com>, <bibby.hsieh@mediatek.com>, <ck.hu@mediatek.com>, <stonea168@163.com>, "Jitao Shi" <jitao.shi@mediatek.com> Subject: [PATCH v5 7/8] dt-bindings: display: panel: add AUO auo,b101uan08.3 panel documentation Date: Mon, 16 Sep 2019 10:29:40 +0800 [thread overview] Message-ID: <20190916022941.15404-8-jitao.shi@mediatek.com> (raw) In-Reply-To: <20190916022941.15404-1-jitao.shi@mediatek.com> Add dcumentation for auo,b101uan08.3, which is mipi dsi video panel and resolution is 1200x1920. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- .../display/panel/auo,b101uan08.3.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt new file mode 100644 index 000000000000..7a31cfe534ac --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt @@ -0,0 +1,34 @@ +AUO Corporation 10.1" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "auo,b101uan08.3" +- reg: the virtual channel number of a DSI peripheral +- enable-gpios: a GPIO spec for the enable pin +- pp1800-supply: core voltage supply +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage +- backlight: phandle of the backlight device attached to the panel + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + panel@0 { + compatible = "auo,b101uan08.3"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Jitao Shi <jitao.shi@mediatek.com> To: Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Cc: Jitao Shi <jitao.shi@mediatek.com>, srv_heupstream@mediatek.com, stonea168@163.com, cawa.cheng@mediatek.com, yingjoe.chen@mediatek.com, eddie.huang@mediatek.com Subject: [PATCH v5 7/8] dt-bindings: display: panel: add AUO auo, b101uan08.3 panel documentation Date: Mon, 16 Sep 2019 10:29:40 +0800 [thread overview] Message-ID: <20190916022941.15404-8-jitao.shi@mediatek.com> (raw) In-Reply-To: <20190916022941.15404-1-jitao.shi@mediatek.com> Add dcumentation for auo,b101uan08.3, which is mipi dsi video panel and resolution is 1200x1920. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- .../display/panel/auo,b101uan08.3.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt new file mode 100644 index 000000000000..7a31cfe534ac --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt @@ -0,0 +1,34 @@ +AUO Corporation 10.1" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "auo,b101uan08.3" +- reg: the virtual channel number of a DSI peripheral +- enable-gpios: a GPIO spec for the enable pin +- pp1800-supply: core voltage supply +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage +- backlight: phandle of the backlight device attached to the panel + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + panel@0 { + compatible = "auo,b101uan08.3"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-09-16 2:30 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-09-16 2:29 [PATCH v5 0/8] add driver for boe,tv101wum-nl6, boe,tv101wum-n53, auo,kd101n80-45na and auo,b101uan08.3 panels Jitao Shi 2019-09-16 2:29 ` [PATCH v5 0/8] add driver for boe, tv101wum-nl6, boe, tv101wum-n53, auo, kd101n80-45na and auo, b101uan08.3 panels Jitao Shi 2019-09-16 2:29 ` [PATCH v5 1/8] dt-bindings: display: panel: Add BOE tv101wum-n16 panel bindings Jitao Shi 2019-09-16 2:29 ` Jitao Shi 2019-09-16 2:29 ` [PATCH v5 2/8] drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel Jitao Shi 2019-09-16 2:29 ` Jitao Shi 2019-09-16 2:29 ` [PATCH v5 3/8] dt-bindings: display: panel: add auo kd101n80-45na panel bindings Jitao Shi 2019-09-16 2:29 ` Jitao Shi 2019-09-16 2:29 ` [PATCH v5 4/8] drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel Jitao Shi 2019-09-16 2:29 ` [PATCH v5 4/8] drm/panel: support for auo, kd101n80-45na " Jitao Shi 2019-09-16 2:29 ` [PATCH v5 5/8] dt-bindings: display: panel: add boe tv101wum-n53 panel documentation Jitao Shi 2019-09-16 2:29 ` Jitao Shi 2019-09-16 2:29 ` [PATCH v5 6/8] drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel Jitao Shi 2019-09-16 2:29 ` Jitao Shi 2019-09-16 2:29 ` Jitao Shi [this message] 2019-09-16 2:29 ` [PATCH v5 7/8] dt-bindings: display: panel: add AUO auo, b101uan08.3 panel documentation Jitao Shi 2019-09-16 2:29 ` [PATCH v5 8/8] drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel Jitao Shi 2019-09-16 2:29 ` Jitao Shi 2019-09-16 15:38 ` [PATCH v5 0/8] add driver for boe, tv101wum-nl6, boe, tv101wum-n53, auo, kd101n80-45na and auo, b101uan08.3 panels Sam Ravnborg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190916022941.15404-8-jitao.shi@mediatek.com \ --to=jitao.shi@mediatek.com \ --cc=airlied@linux.ie \ --cc=bibby.hsieh@mediatek.com \ --cc=cawa.cheng@mediatek.com \ --cc=ck.hu@mediatek.com \ --cc=daniel@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=eddie.huang@mediatek.com \ --cc=linux-kernel@vger.kernel.org \ --cc=sam@ravnborg.org \ --cc=srv_heupstream@mediatek.com \ --cc=stonea168@163.com \ --cc=yingjoe.chen@mediatek.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.