All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Julien Su <juliensu@mxic.com.tw>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Paul Cercueil <paul@crapouillou.net>,
	Chen-Yu Tsai <wens@csie.org>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	linux-mtd@lists.infradead.org, Maxime Ripard <mripard@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 20/40] mtd: rawnand: Get rid of chip->ecc.priv
Date: Thu, 19 Sep 2019 21:31:20 +0200	[thread overview]
Message-ID: <20190919193141.7865-21-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190919193141.7865-1-miquel.raynal@bootlin.com>

nand_ecc_ctrl embeds a private pointer which only has a meaning in the
sunxi driver. This structure will soon be deprecated, but as this
field is actually not needed, let's just drop it.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/sunxi_nand.c | 31 ++++++++++++++++---------------
 include/linux/mtd/rawnand.h       |  2 --
 2 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index ae67b48fd4a6..9b43f8a9dc00 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -182,6 +182,7 @@ struct sunxi_nand_hw_ecc {
  *
  * @node: used to store NAND chips into a list
  * @nand: base NAND chip structure
+ * @ecc: ECC controller structure
  * @clk_rate: clk_rate required for this NAND chip
  * @timing_cfg: TIMING_CFG register value for this NAND chip
  * @timing_ctl: TIMING_CTL register value for this NAND chip
@@ -191,6 +192,7 @@ struct sunxi_nand_hw_ecc {
 struct sunxi_nand_chip {
 	struct list_head node;
 	struct nand_chip nand;
+	struct sunxi_nand_hw_ecc *ecc;
 	unsigned long clk_rate;
 	u32 timing_cfg;
 	u32 timing_ctl;
@@ -676,15 +678,15 @@ static void sunxi_nfc_randomizer_read_buf(struct nand_chip *nand, uint8_t *buf,
 
 static void sunxi_nfc_hw_ecc_enable(struct nand_chip *nand)
 {
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
-	struct sunxi_nand_hw_ecc *data = nand->ecc.priv;
 	u32 ecc_ctl;
 
 	ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL);
 	ecc_ctl &= ~(NFC_ECC_MODE_MSK | NFC_ECC_PIPELINE |
 		     NFC_ECC_BLOCK_SIZE_MSK);
-	ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION |
-		   NFC_ECC_PIPELINE;
+	ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(sunxi_nand->ecc->mode) |
+		   NFC_ECC_EXCEPTION | NFC_ECC_PIPELINE;
 
 	if (nand->ecc.size == 512)
 		ecc_ctl |= NFC_ECC_BLOCK_512;
@@ -1597,9 +1599,9 @@ static const struct mtd_ooblayout_ops sunxi_nand_ooblayout_ops = {
 	.free = sunxi_nand_ooblayout_free,
 };
 
-static void sunxi_nand_hw_ecc_ctrl_cleanup(struct nand_ecc_ctrl *ecc)
+static void sunxi_nand_hw_ecc_ctrl_cleanup(struct sunxi_nand_chip *sunxi_nand)
 {
-	kfree(ecc->priv);
+	kfree(sunxi_nand->ecc);
 }
 
 static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
@@ -1607,10 +1609,10 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 				       struct device_node *np)
 {
 	static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
 	struct mtd_info *mtd = nand_to_mtd(nand);
 	struct nand_device *nanddev = mtd_to_nanddev(mtd);
-	struct sunxi_nand_hw_ecc *data;
 	int nsectors;
 	int ret;
 	int i;
@@ -1647,8 +1649,8 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	if (ecc->size != 512 && ecc->size != 1024)
 		return -EINVAL;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data)
+	sunxi_nand->ecc = kzalloc(sizeof(*sunxi_nand->ecc), GFP_KERNEL);
+	if (!sunxi_nand->ecc)
 		return -ENOMEM;
 
 	/* Prefer 1k ECC chunk over 512 ones */
@@ -1675,7 +1677,7 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 		goto err;
 	}
 
-	data->mode = i;
+	sunxi_nand->ecc->mode = i;
 
 	/* HW ECC always request ECC bytes for 1024 bytes blocks */
 	ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * 1024), 8);
@@ -1693,7 +1695,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	ecc->read_oob = sunxi_nfc_hw_ecc_read_oob;
 	ecc->write_oob = sunxi_nfc_hw_ecc_write_oob;
 	mtd_set_ooblayout(mtd, &sunxi_nand_ooblayout_ops);
-	ecc->priv = data;
 
 	if (nfc->dmac) {
 		ecc->read_page = sunxi_nfc_hw_ecc_read_page_dma;
@@ -1714,16 +1715,16 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	return 0;
 
 err:
-	kfree(data);
+	kfree(sunxi_nand->ecc);
 
 	return ret;
 }
 
-static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
+static void sunxi_nand_ecc_cleanup(struct sunxi_nand_chip *sunxi_nand)
 {
-	switch (ecc->mode) {
+	switch (sunxi_nand->ecc->mode) {
 	case NAND_HW_ECC_ENGINE:
-		sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
+		sunxi_nand_hw_ecc_ctrl_cleanup(sunxi_nand);
 		break;
 	case NAND_NO_ECC_ENGINE:
 	default:
@@ -2046,7 +2047,7 @@ static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc)
 					      struct sunxi_nand_chip,
 					      node);
 		nand_release(&sunxi_nand->nand);
-		sunxi_nand_ecc_cleanup(&sunxi_nand->nand.ecc);
+		sunxi_nand_ecc_cleanup(sunxi_nand);
 		list_del(&sunxi_nand->node);
 	}
 }
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 0fb95f83e161..b15015b7be3c 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -291,7 +291,6 @@ static const struct nand_ecc_caps __name = {			\
  * @prepad:	padding information for syndrome based ECC generators
  * @postpad:	padding information for syndrome based ECC generators
  * @options:	ECC specific options (see NAND_ECC_XXX flags defined above)
- * @priv:	pointer to private ECC control data
  * @calc_buf:	buffer for calculated ECC, size is oobsize.
  * @code_buf:	buffer for ECC read from flash, size is oobsize.
  * @hwctl:	function to control hardware ECC generator. Must only
@@ -344,7 +343,6 @@ struct nand_ecc_ctrl {
 	int prepad;
 	int postpad;
 	unsigned int options;
-	void *priv;
 	u8 *calc_buf;
 	u8 *code_buf;
 	void (*hwctl)(struct nand_chip *chip, int mode);
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Julien Su <juliensu@mxic.com.tw>,
	Schrempf Frieder <frieder.schrempf@kontron.de>,
	Paul Cercueil <paul@crapouillou.net>,
	Chen-Yu Tsai <wens@csie.org>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	linux-mtd@lists.infradead.org, Maxime Ripard <mripard@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Mason Yang <masonccyang@mxic.com.tw>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 20/40] mtd: rawnand: Get rid of chip->ecc.priv
Date: Thu, 19 Sep 2019 21:31:20 +0200	[thread overview]
Message-ID: <20190919193141.7865-21-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190919193141.7865-1-miquel.raynal@bootlin.com>

nand_ecc_ctrl embeds a private pointer which only has a meaning in the
sunxi driver. This structure will soon be deprecated, but as this
field is actually not needed, let's just drop it.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/sunxi_nand.c | 31 ++++++++++++++++---------------
 include/linux/mtd/rawnand.h       |  2 --
 2 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index ae67b48fd4a6..9b43f8a9dc00 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -182,6 +182,7 @@ struct sunxi_nand_hw_ecc {
  *
  * @node: used to store NAND chips into a list
  * @nand: base NAND chip structure
+ * @ecc: ECC controller structure
  * @clk_rate: clk_rate required for this NAND chip
  * @timing_cfg: TIMING_CFG register value for this NAND chip
  * @timing_ctl: TIMING_CTL register value for this NAND chip
@@ -191,6 +192,7 @@ struct sunxi_nand_hw_ecc {
 struct sunxi_nand_chip {
 	struct list_head node;
 	struct nand_chip nand;
+	struct sunxi_nand_hw_ecc *ecc;
 	unsigned long clk_rate;
 	u32 timing_cfg;
 	u32 timing_ctl;
@@ -676,15 +678,15 @@ static void sunxi_nfc_randomizer_read_buf(struct nand_chip *nand, uint8_t *buf,
 
 static void sunxi_nfc_hw_ecc_enable(struct nand_chip *nand)
 {
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
-	struct sunxi_nand_hw_ecc *data = nand->ecc.priv;
 	u32 ecc_ctl;
 
 	ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL);
 	ecc_ctl &= ~(NFC_ECC_MODE_MSK | NFC_ECC_PIPELINE |
 		     NFC_ECC_BLOCK_SIZE_MSK);
-	ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION |
-		   NFC_ECC_PIPELINE;
+	ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(sunxi_nand->ecc->mode) |
+		   NFC_ECC_EXCEPTION | NFC_ECC_PIPELINE;
 
 	if (nand->ecc.size == 512)
 		ecc_ctl |= NFC_ECC_BLOCK_512;
@@ -1597,9 +1599,9 @@ static const struct mtd_ooblayout_ops sunxi_nand_ooblayout_ops = {
 	.free = sunxi_nand_ooblayout_free,
 };
 
-static void sunxi_nand_hw_ecc_ctrl_cleanup(struct nand_ecc_ctrl *ecc)
+static void sunxi_nand_hw_ecc_ctrl_cleanup(struct sunxi_nand_chip *sunxi_nand)
 {
-	kfree(ecc->priv);
+	kfree(sunxi_nand->ecc);
 }
 
 static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
@@ -1607,10 +1609,10 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 				       struct device_node *np)
 {
 	static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
+	struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
 	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
 	struct mtd_info *mtd = nand_to_mtd(nand);
 	struct nand_device *nanddev = mtd_to_nanddev(mtd);
-	struct sunxi_nand_hw_ecc *data;
 	int nsectors;
 	int ret;
 	int i;
@@ -1647,8 +1649,8 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	if (ecc->size != 512 && ecc->size != 1024)
 		return -EINVAL;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data)
+	sunxi_nand->ecc = kzalloc(sizeof(*sunxi_nand->ecc), GFP_KERNEL);
+	if (!sunxi_nand->ecc)
 		return -ENOMEM;
 
 	/* Prefer 1k ECC chunk over 512 ones */
@@ -1675,7 +1677,7 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 		goto err;
 	}
 
-	data->mode = i;
+	sunxi_nand->ecc->mode = i;
 
 	/* HW ECC always request ECC bytes for 1024 bytes blocks */
 	ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * 1024), 8);
@@ -1693,7 +1695,6 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	ecc->read_oob = sunxi_nfc_hw_ecc_read_oob;
 	ecc->write_oob = sunxi_nfc_hw_ecc_write_oob;
 	mtd_set_ooblayout(mtd, &sunxi_nand_ooblayout_ops);
-	ecc->priv = data;
 
 	if (nfc->dmac) {
 		ecc->read_page = sunxi_nfc_hw_ecc_read_page_dma;
@@ -1714,16 +1715,16 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	return 0;
 
 err:
-	kfree(data);
+	kfree(sunxi_nand->ecc);
 
 	return ret;
 }
 
-static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
+static void sunxi_nand_ecc_cleanup(struct sunxi_nand_chip *sunxi_nand)
 {
-	switch (ecc->mode) {
+	switch (sunxi_nand->ecc->mode) {
 	case NAND_HW_ECC_ENGINE:
-		sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
+		sunxi_nand_hw_ecc_ctrl_cleanup(sunxi_nand);
 		break;
 	case NAND_NO_ECC_ENGINE:
 	default:
@@ -2046,7 +2047,7 @@ static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc)
 					      struct sunxi_nand_chip,
 					      node);
 		nand_release(&sunxi_nand->nand);
-		sunxi_nand_ecc_cleanup(&sunxi_nand->nand.ecc);
+		sunxi_nand_ecc_cleanup(sunxi_nand);
 		list_del(&sunxi_nand->node);
 	}
 }
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 0fb95f83e161..b15015b7be3c 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -291,7 +291,6 @@ static const struct nand_ecc_caps __name = {			\
  * @prepad:	padding information for syndrome based ECC generators
  * @postpad:	padding information for syndrome based ECC generators
  * @options:	ECC specific options (see NAND_ECC_XXX flags defined above)
- * @priv:	pointer to private ECC control data
  * @calc_buf:	buffer for calculated ECC, size is oobsize.
  * @code_buf:	buffer for ECC read from flash, size is oobsize.
  * @hwctl:	function to control hardware ECC generator. Must only
@@ -344,7 +343,6 @@ struct nand_ecc_ctrl {
 	int prepad;
 	int postpad;
 	unsigned int options;
-	void *priv;
 	u8 *calc_buf;
 	u8 *code_buf;
 	void (*hwctl)(struct nand_chip *chip, int mode);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-09-19 19:48 UTC|newest]

Thread overview: 127+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-19 19:31 [PATCH v3 00/40] Introduce the generic ECC engine abstraction Miquel Raynal
2019-09-19 19:31 ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 01/40] mtd: rawnand: Avoid a typedef Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  8:41   ` Boris Brezillon
2019-10-12  8:41     ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 02/40] mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  8:48   ` Boris Brezillon
2019-10-12  8:48     ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 03/40] mtd: rawnand: Create a new enumeration to describe OOB placement Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  9:02   ` Boris Brezillon
2019-10-12  9:02     ` Boris Brezillon
2019-10-12  9:07     ` Boris Brezillon
2019-10-12  9:07       ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 04/40] mtd: rawnand: Separate the ECC engine type and the " Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  9:05   ` Boris Brezillon
2019-10-12  9:05     ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 05/40] mtd: rawnand: Create a new enumeration to describe properly ECC types Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  9:14   ` Boris Brezillon
2019-10-12  9:14     ` Boris Brezillon
2020-01-15 20:58     ` Miquel Raynal
2020-01-15 20:58       ` Miquel Raynal
2019-10-12  9:55   ` Boris Brezillon
2019-10-12  9:55     ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 06/40] mtd: rawnand: Use the new ECC engine type enumeration Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  9:15   ` Boris Brezillon
2019-10-12  9:15     ` Boris Brezillon
2019-10-12  9:17   ` Boris Brezillon
2019-10-12  9:17     ` Boris Brezillon
2019-10-12  9:28   ` Boris Brezillon
2019-10-12  9:28     ` Boris Brezillon
2020-01-15 10:33     ` Miquel Raynal
2020-01-15 10:33       ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 07/40] mtd: rawnand: Drop the legacy ECC " Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  9:29   ` Boris Brezillon
2019-10-12  9:29     ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 08/40] mtd: nand: Move nand_device forward declaration to the top Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 09/40] mtd: nand: Add an extra level in the Kconfig hierarchy Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 10/40] mtd: nand: Drop useless 'depends on' in Kconfig Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 11/40] mtd: nand: Add a NAND page I/O request type Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 12/40] mtd: nand: Rename a core structure Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  9:35   ` Boris Brezillon
2019-10-12  9:35     ` Boris Brezillon
2020-01-16  8:53     ` Miquel Raynal
2020-01-16  8:53       ` Miquel Raynal
2020-01-16  9:12       ` Boris Brezillon
2020-01-16  9:12         ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 13/40] mtd: nand: Add more parameters to the nand_ecc_props structure Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12  9:37   ` Boris Brezillon
2019-10-12  9:37     ` Boris Brezillon
2020-01-16  8:59     ` Miquel Raynal
2020-01-16  8:59       ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 14/40] mtd: nand: Introduce the ECC engine abstraction Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 15/40] mtd: nand: Convert the generic NAND layer to the generic ECC framework Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 16/40] mtd: Fix typo in mtd_ooblayout_set_databytes() description Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-10-12 10:58   ` Boris Brezillon
2019-10-12 10:58     ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 17/40] mtd: nand: Move standard OOB layouts to the generic ECC core Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 18/40] mtd: nand: Move ECC specific functions to the " Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 19/40] mtd: nand: ecc: Turn the software BCH implementation generic Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` Miquel Raynal [this message]
2019-09-19 19:31   ` [PATCH v3 20/40] mtd: rawnand: Get rid of chip->ecc.priv Miquel Raynal
2019-09-20  6:18   ` Maxime Ripard
2019-09-20  6:18     ` Maxime Ripard
2019-09-19 19:31 ` [PATCH v3 21/40] mtd: nand: ecc: Move Hamming code to the generic NAND layer Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 22/40] mtd: nand: ecc: Clarify the software Hamming introductory line Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 23/40] mtd: nand: ecc: Turn the software Hamming implementation generic Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 24/40] mtd: nand: Remove useless include about software Hamming ECC Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 25/40] mtd: nand: ecc: Let the software Hamming ECC engine be unselected Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 26/40] mtd: nand: ecc: Create the software BCH engine instance Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 27/40] mtd: nand: ecc: Create the software Hamming " Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 28/40] mtd: nand: Let software ECC engines be retrieved from the NAND core Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 29/40] mtd: spinand: Fix typo in comment Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 30/40] mtd: spinand: Move ECC related definitions earlier in the driver Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 31/40] mtd: spinand: Instantiate a SPI-NAND on-die ECC engine Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 32/40] mtd: nand: Let on-die ECC engines be retrieved from the NAND core Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 33/40] mtd: rawnand: Fill a default ECC provider/algorithm Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 34/40] mtd: spinand: " Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 35/40] mtd: nand: Add helpers to manage ECC engines and configurations Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 36/40] mtd: spinand: Use the external ECC engine logic Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 37/40] mtd: spinand: Propagate ECC information to the MTD structure Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2020-02-17 13:27   ` Emil Lenngren
2020-02-17 13:27     ` Emil Lenngren
2020-02-17 13:31     ` Boris Brezillon
2020-02-17 13:31       ` Boris Brezillon
2019-09-19 19:31 ` [PATCH v3 38/40] mtd: spinand: Allow the case where there is no ECC engine Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 39/40] mtd: spinand: Fix OOB read Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal
2019-09-19 19:31 ` [PATCH v3 40/40] mtd: nand: ecc: Add infrastructure to support hardware engines Miquel Raynal
2019-09-19 19:31   ` Miquel Raynal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190919193141.7865-21-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=boris.brezillon@collabora.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=juliensu@mxic.com.tw \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=masonccyang@mxic.com.tw \
    --cc=mripard@kernel.org \
    --cc=paul@crapouillou.net \
    --cc=richard@nod.at \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vigneshr@ti.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.