From: Wen He <wen.he_1@nxp.com>
To: linux-devel@linux.nxdi.nxp.com, Shawn Guo <shawnguo@kernel.org>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Wen He <wen.he_1@nxp.com>
Subject: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk
Date: Fri, 20 Sep 2019 16:34:19 +0800 [thread overview]
Message-ID: <20190920083419.5092-2-wen.he_1@nxp.com> (raw)
In-Reply-To: <20190920083419.5092-1-wen.he_1@nxp.com>
Update DT node name clock-controller to clock-display, also change
the property #clock-cells value to zero.
This update according the feedback of the Display output interface
clock driver upstream.
Link: https://lore.kernel.org/patchwork/patch/1113832/
Signed-off-by: Wen He <wen.he_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 51fa8f57fdac..db1e186352d8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -79,10 +79,10 @@
clock-output-names = "phy_27m";
};
- dpclk: clock-controller@f1f0000 {
+ dpclk: clock-display@f1f0000 {
compatible = "fsl,ls1028a-plldig";
reg = <0x0 0xf1f0000 0x0 0xffff>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&osc_27m>;
};
@@ -665,7 +665,7 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
- clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
+ clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
<&clockgen 2 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Wen He <wen.he_1@nxp.com>
To: linux-devel@linux.nxdi.nxp.com, Shawn Guo <shawnguo@kernel.org>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Wen He <wen.he_1@nxp.com>
Subject: [v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk
Date: Fri, 20 Sep 2019 16:34:19 +0800 [thread overview]
Message-ID: <20190920083419.5092-2-wen.he_1@nxp.com> (raw)
In-Reply-To: <20190920083419.5092-1-wen.he_1@nxp.com>
Update DT node name clock-controller to clock-display, also change
the property #clock-cells value to zero.
This update according the feedback of the Display output interface
clock driver upstream.
Link: https://lore.kernel.org/patchwork/patch/1113832/
Signed-off-by: Wen He <wen.he_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 51fa8f57fdac..db1e186352d8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -79,10 +79,10 @@
clock-output-names = "phy_27m";
};
- dpclk: clock-controller@f1f0000 {
+ dpclk: clock-display@f1f0000 {
compatible = "fsl,ls1028a-plldig";
reg = <0x0 0xf1f0000 0x0 0xffff>;
- #clock-cells = <1>;
+ #clock-cells = <0>;
clocks = <&osc_27m>;
};
@@ -665,7 +665,7 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
- clocks = <&dpclk 0>, <&clockgen 2 2>, <&clockgen 2 2>,
+ clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
<&clockgen 2 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-09-20 8:45 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-20 8:34 [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500 Wen He
2019-09-20 8:34 ` Wen He
2019-09-20 8:34 ` Wen He [this message]
2019-09-20 8:34 ` [v2 2/2] arm64: dts: ls1028a: Update the DT node definition for dpclk Wen He
2019-10-07 12:35 ` Shawn Guo
2019-10-07 12:35 ` Shawn Guo
2019-10-08 4:08 ` [EXT] " Wen He
2019-10-08 4:08 ` Wen He
2019-10-08 4:08 ` Wen He
2019-10-14 6:21 ` Shawn Guo
2019-10-14 6:21 ` Shawn Guo
2019-10-14 6:21 ` Shawn Guo
2019-10-14 6:25 ` Wen He
2019-10-14 6:25 ` Wen He
2019-10-07 12:32 ` [v2 1/2] arm64: dts: ls1028a: Update the clock providers for the Mali DP500 Shawn Guo
2019-10-07 12:32 ` Shawn Guo
2019-10-07 12:32 ` Shawn Guo
2019-10-07 21:29 ` Leo Li
2019-10-07 21:29 ` Leo Li
2019-10-07 21:29 ` Leo Li
2019-10-14 6:19 ` Shawn Guo
2019-10-14 6:19 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190920083419.5092-2-wen.he_1@nxp.com \
--to=wen.he_1@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-devel@linux.nxdi.nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.