All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Smart <jsmart2021@gmail.com>
To: linux-scsi@vger.kernel.org
Cc: James Smart <jsmart2021@gmail.com>,
	Dick Kennedy <dick.kennedy@broadcom.com>
Subject: [PATCH 14/20] lpfc: Fix spinlock_irq issues in lpfc_els_flush_cmd()
Date: Sat, 21 Sep 2019 20:59:00 -0700	[thread overview]
Message-ID: <20190922035906.10977-15-jsmart2021@gmail.com> (raw)
In-Reply-To: <20190922035906.10977-1-jsmart2021@gmail.com>

While reviewing the CT behavior, issues with spinlock_irq were
seen. The driver should be using spinlock_irqsave/irqrestore in
the els flush routine.

Changed to spinlock_irqsave/irqrestore.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index bd8109b2a083..da90c7bf2287 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -7991,20 +7991,22 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 	struct lpfc_sli_ring *pring;
 	struct lpfc_iocbq *tmp_iocb, *piocb;
 	IOCB_t *cmd = NULL;
+	unsigned long iflags = 0;
 
 	lpfc_fabric_abort_vport(vport);
+
 	/*
 	 * For SLI3, only the hbalock is required.  But SLI4 needs to coordinate
 	 * with the ring insert operation.  Because lpfc_sli_issue_abort_iotag
 	 * ultimately grabs the ring_lock, the driver must splice the list into
 	 * a working list and release the locks before calling the abort.
 	 */
-	spin_lock_irq(&phba->hbalock);
+	spin_lock_irqsave(&phba->hbalock, iflags);
 	pring = lpfc_phba_elsring(phba);
 
 	/* Bail out if we've no ELS wq, like in PCI error recovery case. */
 	if (unlikely(!pring)) {
-		spin_unlock_irq(&phba->hbalock);
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
 		return;
 	}
 
@@ -8045,21 +8047,21 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		spin_unlock(&pring->ring_lock);
-	spin_unlock_irq(&phba->hbalock);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
 
 	/* Abort each txcmpl iocb on aborted list and remove the dlist links. */
 	list_for_each_entry_safe(piocb, tmp_iocb, &abort_list, dlist) {
-		spin_lock_irq(&phba->hbalock);
+		spin_lock_irqsave(&phba->hbalock, iflags);
 		list_del_init(&piocb->dlist);
 		lpfc_sli_issue_abort_iotag(phba, pring, piocb);
-		spin_unlock_irq(&phba->hbalock);
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
 	}
 	if (!list_empty(&abort_list))
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
 				 "3387 abort list for txq not empty\n");
 	INIT_LIST_HEAD(&abort_list);
 
-	spin_lock_irq(&phba->hbalock);
+	spin_lock_irqsave(&phba->hbalock, iflags);
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		spin_lock(&pring->ring_lock);
 
@@ -8099,7 +8101,7 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
 
 	if (phba->sli_rev == LPFC_SLI_REV4)
 		spin_unlock(&pring->ring_lock);
-	spin_unlock_irq(&phba->hbalock);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
 
 	/* Cancel all the IOCBs from the completions list */
 	lpfc_sli_cancel_iocbs(phba, &abort_list,
-- 
2.13.7


  parent reply	other threads:[~2019-09-22  3:59 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-22  3:58 [PATCH 00/20] lpfc: Update lpfc to revision 12.4.0.1 James Smart
2019-09-22  3:58 ` [PATCH 01/20] lpfc: Fix pt2pt discovery on SLI3 HBAs James Smart
2019-09-22  3:58 ` [PATCH 02/20] lpfc: Fix premature re-enabling of interrupts in lpfc_sli_host_down James Smart
2019-09-22  3:58 ` [PATCH 03/20] lpfc: Fix miss of register read failure check James Smart
2019-09-22  3:58 ` [PATCH 04/20] lpfc: Fix NVME io abort failures causing hangs James Smart
2019-09-22  3:58 ` [PATCH 05/20] lpfc: Fix rpi release when deleting vport James Smart
2019-09-22  3:58 ` [PATCH 06/20] lpfc: Fix device recovery errors after PLOGI failures James Smart
2019-09-22  3:58 ` [PATCH 07/20] lpfc: Fix locking on mailbox command completion James Smart
2019-09-22  3:58 ` [PATCH 08/20] lpfc: Fix GPF on scsi " James Smart
2019-09-22  3:58 ` [PATCH 09/20] lpfc: Fix discovery failures when target device connectivity bounces James Smart
2019-09-22  3:58 ` [PATCH 10/20] lpfc: Fix NVMe ABTS in response to receiving an ABTS James Smart
2019-09-22  3:58 ` [PATCH 11/20] lpfc: Fix coverity errors on NULL pointer checks James Smart
2019-09-22  3:58 ` [PATCH 12/20] lpfc: Fix host hang at boot or slow boot James Smart
2019-09-22  3:58 ` [PATCH 13/20] lpfc: Fix list corruption in lpfc_sli_get_iocbq James Smart
2019-09-22  3:59 ` James Smart [this message]
2019-09-22  3:59 ` [PATCH 15/20] lpfc: Fix hdwq sgl locks and irq handling James Smart
2019-09-22  3:59 ` [PATCH 16/20] lpfc: Fix list corruption detected in lpfc_put_sgl_per_hdwq James Smart
2019-09-22  3:59 ` [PATCH 17/20] lpfc: Update async event logging James Smart
2019-09-22  3:59 ` [PATCH 18/20] lpfc: Complete removal of FCoE T10diff support on SLI-4 adapters James Smart
2019-09-22  3:59 ` [PATCH 19/20] lpfc: cleanup: remove unused fcp_txcmlpq_cnt James Smart
2019-09-22  3:59 ` [PATCH 20/20] lpfc: Update lpfc version to 12.4.0.1 James Smart
2019-10-01  2:07 ` [PATCH 00/20] lpfc: Update lpfc to revision 12.4.0.1 Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190922035906.10977-15-jsmart2021@gmail.com \
    --to=jsmart2021@gmail.com \
    --cc=dick.kennedy@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.