All of lore.kernel.org
 help / color / mirror / Atom feed
From: Animesh Manna <animesh.manna@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com
Subject: [RFC 0/6] DP Phy compliace auto test.
Date: Thu,  3 Oct 2019 20:36:47 +0530	[thread overview]
Message-ID: <20191003150653.15881-1-animesh.manna@intel.com> (raw)

Driver changes mainly to process the request coming from Test equipment
as short pulse hpd interrupt to change link-pattern/v-swing/pre-emphasis
Complete auto test suite takes much lesser time than manual run.

Overall design:
--------------
Automate test request will come to source device as HDP short pulse
interrupt from test scope.
Read DPCD 0x201, Check for bit 1 for automated test request.
If set continue and read DPCD 0x218.
Check for bit 3 for phy test pattern, If set continue.
Get the requested test pattern through DPCD 0x248.
Compute requested voltage swing level and pre-emphasis level
from DPCD 0x206 and 0x207
Set signal level through vswing programming sequence.
Write DDI_COMP_CTL and DDI_COMP_PATx as per requested pattern.
Configure the link and write the new test pattern through DPCD.

High level patch description.
-----------------------------
patch 1: drm level api added to get/set test pattern as per vesa
DP spec. This maybe useful for other driver so added in drm layer.
patch 2: vswing/preemphasis adjustment calculation is needed during
phy compliance request processing along with existing link training
process, so moved the same function in intel_dp.c.
patch 3: Parse the test scope request regarding test rquested pattern,
vswing level, preemphasis level.
patch 4: Register difnition of DP compliance register added.
patch 5: Funcion added to update the pattern in source side.
patch 6: This patch os mainly processing the request.

Currently through prototyping patch able to run DP compliance where
vswing, preemphasis and test pattern is changing fine but complete
test is under process. In parallel want to start design discussion
so sending the above patches as RFC.

Animesh Manna (6):
  drm/dp: get/set phy compliance pattern.
  drm/i915/dp: Move vswing/pre-emphasis adjustment calculation
  drm/i915/dp: Preparation for DP phy compliance auto test.
  drm/i915/dp: Register definition for DP compliance register.
  drm/i915/dp: Update the pattern as per request.
  drm/i915/dp: Program vswing, pre-emphasis, test-pattern

 drivers/gpu/drm/drm_dp_helper.c               |  77 ++++++++
 .../drm/i915/display/intel_display_types.h    |   1 +
 drivers/gpu/drm/i915/display/intel_dp.c       | 178 ++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp.h       |   3 +
 .../drm/i915/display/intel_dp_link_training.c |  32 ----
 drivers/gpu/drm/i915/i915_reg.h               |  20 ++
 include/drm/drm_dp_helper.h                   |  28 +++
 7 files changed, 307 insertions(+), 32 deletions(-)

-- 
2.22.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2019-10-03 15:15 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-03 15:06 Animesh Manna [this message]
2019-10-03 15:06 ` [RFC 1/6] drm/dp: get/set phy compliance pattern Animesh Manna
2019-10-03 16:24   ` [Intel-gfx] " kbuild test robot
2019-10-21 23:27   ` Manasi Navare
2019-10-22 13:29     ` Animesh Manna
2019-11-05 23:12   ` Manasi Navare
2019-11-05 23:12     ` [Intel-gfx] " Manasi Navare
2019-10-03 15:06 ` [RFC 2/6] drm/i915/dp: Move vswing/pre-emphasis adjustment calculation Animesh Manna
2019-10-21 22:57   ` Manasi Navare
2019-10-22 14:04     ` Animesh Manna
2019-10-22 17:40       ` Manasi Navare
2019-10-24 11:45         ` Animesh Manna
2019-10-24 11:45           ` [Intel-gfx] " Animesh Manna
2019-10-03 15:06 ` [RFC 3/6] drm/i915/dp: Preparation for DP phy compliance auto test Animesh Manna
2019-10-21 23:29   ` Manasi Navare
2019-10-22 14:12     ` Animesh Manna
2019-10-03 15:06 ` [RFC 4/6] drm/i915/dp: Register definition for DP compliance register Animesh Manna
2019-10-03 15:06 ` [RFC 5/6] drm/i915/dp: Update the pattern as per request Animesh Manna
2019-10-03 15:06 ` [RFC 6/6] drm/i915/dp: Program vswing, pre-emphasis, test-pattern Animesh Manna
2019-10-21 23:47   ` Manasi Navare
2019-10-22 15:07     ` Animesh Manna
2019-10-22 18:41       ` Manasi Navare
2019-10-03 17:36 ` ✓ Fi.CI.BAT: success for DP Phy compliace auto test Patchwork
2019-10-04  3:07 ` ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191003150653.15881-1-animesh.manna@intel.com \
    --to=animesh.manna@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.