All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: gregkh@linuxfoundation.org
Cc: neil@brown.name, driverdev-devel@linuxdriverproject.org
Subject: [PATCH] staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'
Date: Sun,  6 Oct 2019 20:10:32 +0200	[thread overview]
Message-ID: <20191006181032.19112-1-sergio.paracuellos@gmail.com> (raw)

Depending on revision of the chip, reset lines are inverted. Make code
more readable making use of 'soc_device_match' in driver probe function.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/staging/mt7621-pci/pci-mt7621.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 6b98827da57f..3633c924848e 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -29,15 +29,14 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
+#include <linux/sys_soc.h>
 #include <mt7621.h>
 #include <ralink_regs.h>
 
 #include "../../pci/pci.h"
 
 /* sysctl */
-#define MT7621_CHIP_REV_ID		0x0c
 #define MT7621_GPIO_MODE		0x60
-#define CHIP_REV_MT7621_E2		0x0101
 
 /* MediaTek specific configuration registers */
 #define PCIE_FTS_NUM			0x70c
@@ -126,6 +125,8 @@ struct mt7621_pcie_port {
  * @ports: pointer to PCIe port information
  * @perst: gpio reset
  * @rst: pointer to pcie reset
+ * @resets_inverted: depends on chip revision
+ * reset lines are inverted.
  */
 struct mt7621_pcie {
 	void __iomem *base;
@@ -140,6 +141,7 @@ struct mt7621_pcie {
 	struct list_head ports;
 	struct gpio_desc *perst;
 	struct reset_control *rst;
+	bool resets_inverted;
 };
 
 static inline u32 pcie_read(struct mt7621_pcie *pcie, u32 reg)
@@ -229,9 +231,9 @@ static inline void mt7621_pcie_port_clk_disable(struct mt7621_pcie_port *port)
 
 static inline void mt7621_control_assert(struct mt7621_pcie_port *port)
 {
-	u32 chip_rev_id = rt_sysc_r32(MT7621_CHIP_REV_ID);
+	struct mt7621_pcie *pcie = port->pcie;
 
-	if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2)
+	if (pcie->resets_inverted)
 		reset_control_assert(port->pcie_rst);
 	else
 		reset_control_deassert(port->pcie_rst);
@@ -239,9 +241,9 @@ static inline void mt7621_control_assert(struct mt7621_pcie_port *port)
 
 static inline void mt7621_control_deassert(struct mt7621_pcie_port *port)
 {
-	u32 chip_rev_id = rt_sysc_r32(MT7621_CHIP_REV_ID);
+	struct mt7621_pcie *pcie = port->pcie;
 
-	if ((chip_rev_id & 0xFFFF) == CHIP_REV_MT7621_E2)
+	if (pcie->resets_inverted)
 		reset_control_deassert(port->pcie_rst);
 	else
 		reset_control_assert(port->pcie_rst);
@@ -641,9 +643,14 @@ static int mt7621_pcie_register_host(struct pci_host_bridge *host,
 	return pci_host_probe(host);
 }
 
+static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
+	{ .soc_id = "mt7621", .revision = "E2" }
+};
+
 static int mt7621_pci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct soc_device_attribute *attr;
 	struct mt7621_pcie *pcie;
 	struct pci_host_bridge *bridge;
 	int err;
@@ -661,6 +668,10 @@ static int mt7621_pci_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pcie);
 	INIT_LIST_HEAD(&pcie->ports);
 
+	attr = soc_device_match(mt7621_pci_quirks_match);
+	if (attr)
+		pcie->resets_inverted = true;
+
 	err = mt7621_pcie_parse_dt(pcie);
 	if (err) {
 		dev_err(dev, "Parsing DT failed\n");
-- 
2.19.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

                 reply	other threads:[~2019-10-06 18:10 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191006181032.19112-1-sergio.paracuellos@gmail.com \
    --to=sergio.paracuellos@gmail.com \
    --cc=driverdev-devel@linuxdriverproject.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=neil@brown.name \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.