All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Olof Johansson <olof@lixom.net>,
	Maxime Ripard <mripard@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Anson Huang <Anson.Huang@nxp.com>,
	Leonard Crestez <leonard.crestez@nxp.com>,
	Dinh Nguyen <dinguyen@kernel.org>,
	Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Alex Elder <elder@linaro.org>
Subject: [PATCH] arm64: defconfig: Enable Qualcomm remoteproc dependencies
Date: Tue,  8 Oct 2019 17:14:42 -0700	[thread overview]
Message-ID: <20191009001442.15719-1-bjorn.andersson@linaro.org> (raw)

Enable the the power domains, reset controllers and remote block device
memory access drivers necessary to boot the Audio, Compute and Modem
DSPs on Qualcomm SDM845.

None of the power domains are system critical, but needs to be builtin
as the driver core prohibits probe deferal past late initcall.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c9a867ac32d4..42f042ba1039 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -732,10 +732,13 @@ CONFIG_RPMSG_QCOM_GLINK_SMEM=m
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_IMX_SCU_SOC=y
+CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_GLINK_SSR=m
+CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -780,6 +783,8 @@ CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_RESET_QCOM_AOSS=y
+CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_TI_SCI=y
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_SUN4I_USB=y
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Olof Johansson <olof@lixom.net>,
	Maxime Ripard <mripard@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Anson Huang <Anson.Huang@nxp.com>,
	Leonard Crestez <leonard.crestez@nxp.com>,
	Dinh Nguyen <dinguyen@kernel.org>,
	Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Alex Elder <elder@linaro.org>
Subject: [PATCH] arm64: defconfig: Enable Qualcomm remoteproc dependencies
Date: Tue,  8 Oct 2019 17:14:42 -0700	[thread overview]
Message-ID: <20191009001442.15719-1-bjorn.andersson@linaro.org> (raw)

Enable the the power domains, reset controllers and remote block device
memory access drivers necessary to boot the Audio, Compute and Modem
DSPs on Qualcomm SDM845.

None of the power domains are system critical, but needs to be builtin
as the driver core prohibits probe deferal past late initcall.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c9a867ac32d4..42f042ba1039 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -732,10 +732,13 @@ CONFIG_RPMSG_QCOM_GLINK_SMEM=m
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_IMX_SCU_SOC=y
+CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_GLINK_SSR=m
+CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -780,6 +783,8 @@ CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_RESET_QCOM_AOSS=y
+CONFIG_RESET_QCOM_PDC=m
 CONFIG_RESET_TI_SCI=y
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_SUN4I_USB=y
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-10-09  0:14 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09  0:14 Bjorn Andersson [this message]
2019-10-09  0:14 ` [PATCH] arm64: defconfig: Enable Qualcomm remoteproc dependencies Bjorn Andersson
2019-10-10 13:07 ` Alex Elder
2019-10-10 13:07   ` Alex Elder
2019-10-16  5:58 ` Vinod Koul
2019-10-16  5:58   ` Vinod Koul
2019-10-16  6:03 ` Bjorn Andersson
2019-10-16  6:03   ` Bjorn Andersson
2019-10-18 10:38 ` Sibi Sankar
2019-10-18 10:38   ` Sibi Sankar
2019-10-18 16:53   ` Bjorn Andersson
2019-10-18 16:53     ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191009001442.15719-1-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=Anson.Huang@nxp.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=dinguyen@kernel.org \
    --cc=elder@linaro.org \
    --cc=jagan@amarulasolutions.com \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcin.juszkiewicz@linaro.org \
    --cc=mripard@kernel.org \
    --cc=olof@lixom.net \
    --cc=shawnguo@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.