From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, lgirdwood@gmail.com, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Stephan Gerhold <stephan@gerhold.net> Subject: [PATCH] ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2 Date: Wed, 9 Oct 2019 12:19:44 +0100 [thread overview] Message-ID: <20191009111944.28069-1-srinivas.kandagatla@linaro.org> (raw) This patch adds missing MIX2 path on RX1/2 which take IIR1 and IIR2 as inputs. Without this patch sound card fails to intialize with below warning: ASoC: no sink widget found for RX1 MIX2 INP1 ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1 ASoC: no sink widget found for RX2 MIX2 INP1 ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1 ASoC: no sink widget found for RX1 MIX2 INP1 ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1 ASoC: no sink widget found for RX2 MIX2 INP1 ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1 Reported-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> --- sound/soc/codecs/msm8916-wcd-digital.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/soc/codecs/msm8916-wcd-digital.c b/sound/soc/codecs/msm8916-wcd-digital.c index 9fa5d44fdc79..58b2468fb2a7 100644 --- a/sound/soc/codecs/msm8916-wcd-digital.c +++ b/sound/soc/codecs/msm8916-wcd-digital.c @@ -243,6 +243,10 @@ static const char *const rx_mix1_text[] = { "ZERO", "IIR1", "IIR2", "RX1", "RX2", "RX3" }; +static const char * const rx_mix2_text[] = { + "ZERO", "IIR1", "IIR2" +}; + static const char *const dec_mux_text[] = { "ZERO", "ADC1", "ADC2", "ADC3", "DMIC1", "DMIC2" }; @@ -270,6 +274,16 @@ static const struct soc_enum rx3_mix1_inp_enum[] = { SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX3_B2_CTL, 0, 6, rx_mix1_text), }; +/* RX1 MIX2 */ +static const struct soc_enum rx_mix2_inp1_chain_enum = + SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX1_B3_CTL, + 0, 3, rx_mix2_text); + +/* RX2 MIX2 */ +static const struct soc_enum rx2_mix2_inp1_chain_enum = + SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX2_B3_CTL, + 0, 3, rx_mix2_text); + /* DEC */ static const struct soc_enum dec1_mux_enum = SOC_ENUM_SINGLE( LPASS_CDC_CONN_TX_B1_CTL, 0, 6, dec_mux_text); @@ -309,6 +323,10 @@ static const struct snd_kcontrol_new rx3_mix1_inp2_mux = SOC_DAPM_ENUM( "RX3 MIX1 INP2 Mux", rx3_mix1_inp_enum[1]); static const struct snd_kcontrol_new rx3_mix1_inp3_mux = SOC_DAPM_ENUM( "RX3 MIX1 INP3 Mux", rx3_mix1_inp_enum[2]); +static const struct snd_kcontrol_new rx1_mix2_inp1_mux = SOC_DAPM_ENUM( + "RX1 MIX2 INP1 Mux", rx_mix2_inp1_chain_enum); +static const struct snd_kcontrol_new rx2_mix2_inp1_mux = SOC_DAPM_ENUM( + "RX2 MIX2 INP1 Mux", rx2_mix2_inp1_chain_enum); /* Digital Gain control -38.4 dB to +38.4 dB in 0.3 dB steps */ static const DECLARE_TLV_DB_SCALE(digital_gain, -3840, 30, 0); @@ -740,6 +758,10 @@ static const struct snd_soc_dapm_widget msm8916_wcd_digital_dapm_widgets[] = { &rx3_mix1_inp2_mux), SND_SOC_DAPM_MUX("RX3 MIX1 INP3", SND_SOC_NOPM, 0, 0, &rx3_mix1_inp3_mux), + SND_SOC_DAPM_MUX("RX1 MIX2 INP1", SND_SOC_NOPM, 0, 0, + &rx1_mix2_inp1_mux), + SND_SOC_DAPM_MUX("RX2 MIX2 INP1", SND_SOC_NOPM, 0, 0, + &rx2_mix2_inp1_mux), SND_SOC_DAPM_MUX("CIC1 MUX", SND_SOC_NOPM, 0, 0, &cic1_mux), SND_SOC_DAPM_MUX("CIC2 MUX", SND_SOC_NOPM, 0, 0, &cic2_mux), -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: alsa-devel@alsa-project.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, linux-kernel@vger.kernel.org, Stephan Gerhold <stephan@gerhold.net>, lgirdwood@gmail.com Subject: [alsa-devel] [PATCH] ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2 Date: Wed, 9 Oct 2019 12:19:44 +0100 [thread overview] Message-ID: <20191009111944.28069-1-srinivas.kandagatla@linaro.org> (raw) This patch adds missing MIX2 path on RX1/2 which take IIR1 and IIR2 as inputs. Without this patch sound card fails to intialize with below warning: ASoC: no sink widget found for RX1 MIX2 INP1 ASoC: Failed to add route IIR1 -> IIR1 -> RX1 MIX2 INP1 ASoC: no sink widget found for RX2 MIX2 INP1 ASoC: Failed to add route IIR1 -> IIR1 -> RX2 MIX2 INP1 ASoC: no sink widget found for RX1 MIX2 INP1 ASoC: Failed to add route IIR2 -> IIR2 -> RX1 MIX2 INP1 ASoC: no sink widget found for RX2 MIX2 INP1 ASoC: Failed to add route IIR2 -> IIR2 -> RX2 MIX2 INP1 Reported-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Stephan Gerhold <stephan@gerhold.net> --- sound/soc/codecs/msm8916-wcd-digital.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/soc/codecs/msm8916-wcd-digital.c b/sound/soc/codecs/msm8916-wcd-digital.c index 9fa5d44fdc79..58b2468fb2a7 100644 --- a/sound/soc/codecs/msm8916-wcd-digital.c +++ b/sound/soc/codecs/msm8916-wcd-digital.c @@ -243,6 +243,10 @@ static const char *const rx_mix1_text[] = { "ZERO", "IIR1", "IIR2", "RX1", "RX2", "RX3" }; +static const char * const rx_mix2_text[] = { + "ZERO", "IIR1", "IIR2" +}; + static const char *const dec_mux_text[] = { "ZERO", "ADC1", "ADC2", "ADC3", "DMIC1", "DMIC2" }; @@ -270,6 +274,16 @@ static const struct soc_enum rx3_mix1_inp_enum[] = { SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX3_B2_CTL, 0, 6, rx_mix1_text), }; +/* RX1 MIX2 */ +static const struct soc_enum rx_mix2_inp1_chain_enum = + SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX1_B3_CTL, + 0, 3, rx_mix2_text); + +/* RX2 MIX2 */ +static const struct soc_enum rx2_mix2_inp1_chain_enum = + SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX2_B3_CTL, + 0, 3, rx_mix2_text); + /* DEC */ static const struct soc_enum dec1_mux_enum = SOC_ENUM_SINGLE( LPASS_CDC_CONN_TX_B1_CTL, 0, 6, dec_mux_text); @@ -309,6 +323,10 @@ static const struct snd_kcontrol_new rx3_mix1_inp2_mux = SOC_DAPM_ENUM( "RX3 MIX1 INP2 Mux", rx3_mix1_inp_enum[1]); static const struct snd_kcontrol_new rx3_mix1_inp3_mux = SOC_DAPM_ENUM( "RX3 MIX1 INP3 Mux", rx3_mix1_inp_enum[2]); +static const struct snd_kcontrol_new rx1_mix2_inp1_mux = SOC_DAPM_ENUM( + "RX1 MIX2 INP1 Mux", rx_mix2_inp1_chain_enum); +static const struct snd_kcontrol_new rx2_mix2_inp1_mux = SOC_DAPM_ENUM( + "RX2 MIX2 INP1 Mux", rx2_mix2_inp1_chain_enum); /* Digital Gain control -38.4 dB to +38.4 dB in 0.3 dB steps */ static const DECLARE_TLV_DB_SCALE(digital_gain, -3840, 30, 0); @@ -740,6 +758,10 @@ static const struct snd_soc_dapm_widget msm8916_wcd_digital_dapm_widgets[] = { &rx3_mix1_inp2_mux), SND_SOC_DAPM_MUX("RX3 MIX1 INP3", SND_SOC_NOPM, 0, 0, &rx3_mix1_inp3_mux), + SND_SOC_DAPM_MUX("RX1 MIX2 INP1", SND_SOC_NOPM, 0, 0, + &rx1_mix2_inp1_mux), + SND_SOC_DAPM_MUX("RX2 MIX2 INP1", SND_SOC_NOPM, 0, 0, + &rx2_mix2_inp1_mux), SND_SOC_DAPM_MUX("CIC1 MUX", SND_SOC_NOPM, 0, 0, &cic1_mux), SND_SOC_DAPM_MUX("CIC2 MUX", SND_SOC_NOPM, 0, 0, &cic2_mux), -- 2.21.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-10-09 11:20 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-09 11:19 Srinivas Kandagatla [this message] 2019-10-09 11:19 ` [alsa-devel] [PATCH] ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2 Srinivas Kandagatla 2019-10-09 17:21 ` Applied "ASoC: msm8916-wcd-digital: add missing MIX2 path for RX1/2" to the asoc tree Mark Brown 2019-10-09 17:21 ` [alsa-devel] " Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191009111944.28069-1-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=stephan@gerhold.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.