From: Tero Kristo <t-kristo@ti.com> To: linux-omap@vger.kernel.org, tony@atomide.com Cc: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/5] ARM: dts: omap4: add PRM nodes Date: Thu, 10 Oct 2019 11:21:05 +0300 [thread overview] Message-ID: <20191010082108.15448-3-t-kristo@ti.com> (raw) In-Reply-To: <20191010082108.15448-1-t-kristo@ti.com> Add PRM nodes for omap4 series of SoCs. These are initially used to support reset control for some of the nodes, but will be extended later to add powerdomain control and support for PRCM irqs among other things. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/boot/dts/omap4-l4.dtsi | 2 +- arch/arm/boot/dts/omap4.dtsi | 29 +++++++++++++++++++++++++++++ 2 files changed, 30 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index d60d5e0ecc4c..3421ef387e21 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1007,7 +1007,7 @@ ranges = <0x0 0x6000 0x2000>; prm: prm@0 { - compatible = "ti,omap4-prm"; + compatible = "ti,omap4-prm", "simple-bus"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7cc95bc1598b..f25f027e7c1c 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -442,3 +442,29 @@ #include "omap4-l4.dtsi" #include "omap4-l4-abe.dtsi" #include "omap44xx-clocks.dtsi" + +&prm { + prm_tesla: prm@400 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_ivahd: prm@f00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1b00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; +}; -- 2.17.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Tero Kristo <t-kristo@ti.com> To: <linux-omap@vger.kernel.org>, <tony@atomide.com> Cc: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/5] ARM: dts: omap4: add PRM nodes Date: Thu, 10 Oct 2019 11:21:05 +0300 [thread overview] Message-ID: <20191010082108.15448-3-t-kristo@ti.com> (raw) In-Reply-To: <20191010082108.15448-1-t-kristo@ti.com> Add PRM nodes for omap4 series of SoCs. These are initially used to support reset control for some of the nodes, but will be extended later to add powerdomain control and support for PRCM irqs among other things. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/boot/dts/omap4-l4.dtsi | 2 +- arch/arm/boot/dts/omap4.dtsi | 29 +++++++++++++++++++++++++++++ 2 files changed, 30 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index d60d5e0ecc4c..3421ef387e21 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1007,7 +1007,7 @@ ranges = <0x0 0x6000 0x2000>; prm: prm@0 { - compatible = "ti,omap4-prm"; + compatible = "ti,omap4-prm", "simple-bus"; reg = <0x0 0x2000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7cc95bc1598b..f25f027e7c1c 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -442,3 +442,29 @@ #include "omap4-l4.dtsi" #include "omap4-l4-abe.dtsi" #include "omap44xx-clocks.dtsi" + +&prm { + prm_tesla: prm@400 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x400 0x100>; + #reset-cells = <1>; + }; + + prm_core: prm@700 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x700 0x100>; + #reset-cells = <1>; + }; + + prm_ivahd: prm@f00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0xf00 0x100>; + #reset-cells = <1>; + }; + + prm_device: prm@1b00 { + compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst"; + reg = <0x1b00 0x40>; + #reset-cells = <1>; + }; +}; -- 2.17.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-10 8:21 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-10 8:21 [PATCH 0/5] ARM: dts: omap4+: Add PRM nodes for reset support Tero Kristo 2019-10-10 8:21 ` Tero Kristo 2019-10-10 8:21 ` [PATCH 1/5] ARM: dts: dra7: add PRM nodes Tero Kristo 2019-10-10 8:21 ` Tero Kristo 2019-10-10 8:21 ` Tero Kristo [this message] 2019-10-10 8:21 ` [PATCH 2/5] ARM: dts: omap4: " Tero Kristo 2019-10-10 8:21 ` [PATCH 3/5] ARM: dts: am33xx: Add PRM data Tero Kristo 2019-10-10 8:21 ` Tero Kristo 2019-10-10 8:21 ` [PATCH 4/5] ARM: dts: am43xx: " Tero Kristo 2019-10-10 8:21 ` Tero Kristo 2019-10-10 8:21 ` [PATCH 5/5] ARM: dts: omap5: " Tero Kristo 2019-10-10 8:21 ` Tero Kristo 2019-10-10 14:31 ` [PATCH 0/5] ARM: dts: omap4+: Add PRM nodes for reset support Tony Lindgren 2019-10-10 14:31 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191010082108.15448-3-t-kristo@ti.com \ --to=t-kristo@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.