From: Neil Armstrong <narmstrong@baylibre.com>
To: balbi@kernel.org, khilman@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
linux-usb@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 0/3] arm64: g12-common: parkmode_disable_ss_quirk on DWC3 controller
Date: Mon, 14 Oct 2019 16:17:15 +0200 [thread overview]
Message-ID: <20191014141718.22603-1-narmstrong@baylibre.com> (raw)
In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
usb 2-1.1-port1: cannot reset (err = -22)
Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"
Neil Armstrong (3):
doc: dt: bindings: usb: dwc3: Update entries for disabling SS
instances in park mode
usb: dwc3: gadget: Add support for disabling SS instances in park mode
arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3
controller
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 4 ++++
4 files changed, 12 insertions(+)
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: balbi@kernel.org, khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 0/3] arm64: g12-common: parkmode_disable_ss_quirk on DWC3 controller
Date: Mon, 14 Oct 2019 16:17:15 +0200 [thread overview]
Message-ID: <20191014141718.22603-1-narmstrong@baylibre.com> (raw)
In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
usb 2-1.1-port1: cannot reset (err = -22)
Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"
Neil Armstrong (3):
doc: dt: bindings: usb: dwc3: Update entries for disabling SS
instances in park mode
usb: dwc3: gadget: Add support for disabling SS instances in park mode
arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3
controller
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 4 ++++
4 files changed, 12 insertions(+)
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: balbi@kernel.org, khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 0/3] arm64: g12-common: parkmode_disable_ss_quirk on DWC3 controller
Date: Mon, 14 Oct 2019 16:17:15 +0200 [thread overview]
Message-ID: <20191014141718.22603-1-narmstrong@baylibre.com> (raw)
In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
usb 2-1.1-port1: cannot reset (err = -22)
Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"
Neil Armstrong (3):
doc: dt: bindings: usb: dwc3: Update entries for disabling SS
instances in park mode
usb: dwc3: gadget: Add support for disabling SS instances in park mode
arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3
controller
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 +
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 4 ++++
4 files changed, 12 insertions(+)
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-10-14 14:17 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-14 14:17 Neil Armstrong [this message]
2019-10-14 14:17 ` [PATCH 0/3] arm64: g12-common: parkmode_disable_ss_quirk on DWC3 controller Neil Armstrong
2019-10-14 14:17 ` Neil Armstrong
2019-10-14 14:17 ` [PATCH 1/3] doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode Neil Armstrong
2019-10-14 14:17 ` Neil Armstrong
2019-10-14 14:17 ` Neil Armstrong
2019-10-23 20:11 ` Rob Herring
2019-10-23 20:11 ` Rob Herring
2019-10-23 20:11 ` Rob Herring
2019-11-11 0:38 ` Tim
2019-11-11 0:38 ` Tim
2019-11-11 0:38 ` Tim
2019-11-11 1:58 ` Jun Li
2019-11-11 1:58 ` Jun Li
2019-11-11 1:58 ` Jun Li
2019-11-11 14:05 ` Tim
2019-11-11 14:05 ` Tim
2019-11-11 14:05 ` Tim
2019-11-12 1:48 ` Jun Li
2019-11-12 1:48 ` Jun Li
2019-11-12 1:48 ` Jun Li
2019-11-12 9:00 ` Neil Armstrong
2019-11-12 9:00 ` Neil Armstrong
2019-11-12 9:00 ` Neil Armstrong
2019-11-12 10:51 ` Jun Li
2019-11-12 10:51 ` Jun Li
2019-11-12 10:51 ` Jun Li
2019-11-12 20:03 ` Thinh Nguyen
2019-11-12 20:03 ` Thinh Nguyen
2019-11-12 20:03 ` Thinh Nguyen
2019-12-10 8:55 ` Neil Armstrong
2019-12-10 8:55 ` Neil Armstrong
2019-12-10 8:55 ` Neil Armstrong
2019-12-11 0:45 ` Tim
2019-12-11 0:45 ` Tim
2019-12-11 0:45 ` Tim
2019-12-20 9:58 ` Tim
2019-12-20 9:58 ` Tim
2019-12-20 9:58 ` Tim
2019-10-14 14:17 ` [PATCH 2/3] usb: dwc3: gadget: Add support " Neil Armstrong
2019-10-14 14:17 ` Neil Armstrong
2019-10-14 14:17 ` Neil Armstrong
2019-10-14 14:17 ` [PATCH 3/3] arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller Neil Armstrong
2019-10-14 14:17 ` Neil Armstrong
2019-10-14 14:17 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191014141718.22603-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=balbi@kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.