All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: linux-input@vger.kernel.org
Cc: Anders Roxell <anders.roxell@linaro.org>,
	Eric Anholt <eric@anholt.net>, Jeff LaBundy <jeff@labundy.com>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Martin Kepplinger <martink@posteo.de>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 01/22] Input: raspberrypi-ts - switch to using polled mode of input devices
Date: Thu, 17 Oct 2019 13:41:55 -0700	[thread overview]
Message-ID: <20191017204217.106453-2-dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <20191017204217.106453-1-dmitry.torokhov@gmail.com>

We have added polled mode to the normal input devices with the intent of
retiring input_polled_dev. This converts raspberrypi-ts driver to use the
polling mode of standard input devices and removes dependency on
INPUT_POLLDEV.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

 drivers/input/touchscreen/Kconfig          |  1 -
 drivers/input/touchscreen/raspberrypi-ts.c | 38 ++++++++++++----------
 2 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 46ad9090493b..00e7a9f218bc 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -700,7 +700,6 @@ config TOUCHSCREEN_EDT_FT5X06
 config TOUCHSCREEN_RASPBERRYPI_FW
 	tristate "Raspberry Pi's firmware base touch screen support"
 	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
-	select INPUT_POLLDEV
 	help
 	  Say Y here if you have the official Raspberry Pi 7 inch screen on
 	  your system.
diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c
index 69881265d121..0e2e08f3f433 100644
--- a/drivers/input/touchscreen/raspberrypi-ts.c
+++ b/drivers/input/touchscreen/raspberrypi-ts.c
@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/input/mt.h>
-#include <linux/input-polldev.h>
 #include <linux/input/touchscreen.h>
 #include <soc/bcm2835/raspberrypi-firmware.h>
 
@@ -34,7 +33,7 @@
 
 struct rpi_ts {
 	struct platform_device *pdev;
-	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
 	struct touchscreen_properties prop;
 
 	void __iomem *fw_regs_va;
@@ -57,10 +56,9 @@ struct rpi_ts_regs {
 	} point[RPI_TS_MAX_SUPPORTED_POINTS];
 };
 
-static void rpi_ts_poll(struct input_polled_dev *dev)
+static void rpi_ts_poll(struct input_dev *input)
 {
-	struct input_dev *input = dev->input;
-	struct rpi_ts *ts = dev->private;
+	struct rpi_ts *ts = input_get_drvdata(input);
 	struct rpi_ts_regs regs;
 	int modified_ids = 0;
 	long released_ids;
@@ -123,10 +121,9 @@ static int rpi_ts_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
 	struct device_node *fw_node;
 	struct rpi_firmware *fw;
-	struct input_dev *input;
 	struct rpi_ts *ts;
 	u32 touchbuf;
 	int error;
@@ -160,7 +157,6 @@ static int rpi_ts_probe(struct platform_device *pdev)
 		return error;
 	}
 
-
 	touchbuf = (u32)ts->fw_regs_phys;
 	error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF,
 				      &touchbuf, sizeof(touchbuf));
@@ -170,19 +166,17 @@ static int rpi_ts_probe(struct platform_device *pdev)
 		return error;
 	}
 
-	poll_dev = devm_input_allocate_polled_device(dev);
-	if (!poll_dev) {
+	input = devm_input_allocate_device(dev);
+	if (!input) {
 		dev_err(dev, "Failed to allocate input device\n");
 		return -ENOMEM;
 	}
-	ts->poll_dev = poll_dev;
-	input = poll_dev->input;
+
+	ts->input = input;
+	input_set_drvdata(input, ts);
 
 	input->name = "raspberrypi-ts";
 	input->id.bustype = BUS_HOST;
-	poll_dev->poll_interval = RPI_TS_POLL_INTERVAL;
-	poll_dev->poll = rpi_ts_poll;
-	poll_dev->private = ts;
 
 	input_set_abs_params(input, ABS_MT_POSITION_X, 0,
 			     RPI_TS_DEFAULT_WIDTH, 0, 0);
@@ -197,7 +191,15 @@ static int rpi_ts_probe(struct platform_device *pdev)
 		return error;
 	}
 
-	error = input_register_polled_device(poll_dev);
+	error = input_setup_polling(input, rpi_ts_poll);
+	if (error) {
+		dev_err(dev, "could not set up polling mode, %d\n", error);
+		return error;
+	}
+
+	input_set_poll_interval(input, RPI_TS_POLL_INTERVAL);
+
+	error = input_register_device(input);
 	if (error) {
 		dev_err(dev, "could not register input device, %d\n", error);
 		return error;
@@ -214,10 +216,10 @@ MODULE_DEVICE_TABLE(of, rpi_ts_match);
 
 static struct platform_driver rpi_ts_driver = {
 	.driver = {
-		.name   = "raspberrypi-ts",
+		.name = "raspberrypi-ts",
 		.of_match_table = rpi_ts_match,
 	},
-	.probe          = rpi_ts_probe,
+	.probe = rpi_ts_probe,
 };
 module_platform_driver(rpi_ts_driver);
 
-- 
2.23.0.866.gb869b98d4c-goog


  reply	other threads:[~2019-10-17 20:42 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-17 20:41 [PATCH 00/22] Stop using input_polled_dev in polling drivers Dmitry Torokhov
2019-10-17 20:41 ` Dmitry Torokhov
2019-10-17 20:41 ` Dmitry Torokhov [this message]
2019-10-17 20:41 ` [PATCH 02/22] Input: sur40 - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:41 ` [PATCH 03/22] Input: ts4800-ts " Dmitry Torokhov
2019-10-17 20:41 ` [PATCH 04/22] Input: tsc6507x-ts " Dmitry Torokhov
2019-10-17 20:41 ` [PATCH 05/22] Input: adc-keys " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 06/22] Input: clps711x-keypad " Dmitry Torokhov
2019-10-17 20:42   ` Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 07/22] Input: jornada680_kbd " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 08/22] Input: gpio_keys_polled " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 09/22] Input: apanel " Dmitry Torokhov
2019-10-21 20:05   ` Sven Van Asbroeck
2019-10-21 21:27     ` Dmitry Torokhov
2019-10-22 13:21       ` Sven Van Asbroeck
2019-10-17 20:42 ` [PATCH 10/22] Input: wistron_btns " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 11/22] Input: cobalt_btns - convert to use managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 12/22] Input: cobalt_btns - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 13/22] Input: sgi_btns - switch to using managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 14/22] Input: sgi_btns - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 15/22] Input: rb532_button - switch to using managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 16/22] Input: rb532_button - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 17/22] Input: gpio_decoder " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 18/22] Input: mma8450 " Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 19/22] Input: bma150 - use managed resources helpers Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 20/22] Input: bma150 - switch to using polled mode of input devices Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 21/22] Input: kxtj9 - switch to using managed resources Dmitry Torokhov
2019-10-17 20:42 ` [PATCH 22/22] Input: kxtj9 - switch to using polled mode of input devices Dmitry Torokhov
2019-10-18  8:44 ` [PATCH 00/22] Stop using input_polled_dev in polling drivers Andy Shevchenko
2019-10-18  8:44   ` Andy Shevchenko
2019-10-21  8:03   ` Marco Felsch
2019-10-21  8:03     ` Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191017204217.106453-2-dmitry.torokhov@gmail.com \
    --to=dmitry.torokhov@gmail.com \
    --cc=anders.roxell@linaro.org \
    --cc=eric@anholt.net \
    --cc=jeff@labundy.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martink@posteo.de \
    --cc=mcgrof@kernel.org \
    --cc=nsaenzjulienne@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.