From: Kamel Bouhara <kamel.bouhara@bootlin.com> To: Rob Herring <robh+dt@kernel.org>, Nicolas Ferre <nicolas.ferre@microchip.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Ludovic Desroches <ludovic.desroches@microchip.com>, linux-arm-kernel@lists.infradead.org Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, "Kamel Bouhara" <kamel.bouhara@bootlin.com>, "Kévin RAYMOND" <k.raymond@overkiz.com>, "Mickael GARDET" <m.gardet@overkiz.com> Subject: [PATCH 2/2] ARM: at91: add support for SmartKiz board Date: Fri, 18 Oct 2019 16:06:58 +0200 [thread overview] Message-ID: <20191018140658.31703-3-kamel.bouhara@bootlin.com> (raw) In-Reply-To: <20191018140658.31703-1-kamel.bouhara@bootlin.com> Add the devicetree for the Overkiz's SmartKiz board. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com> Signed-off-by: Mickael GARDET <m.gardet@overkiz.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-smartkiz.dts | 112 ++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) create mode 100644 arch/arm/boot/dts/at91-smartkiz.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6b3a65f3f6f8..12a6b8c6b27e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-kizboxmini.dtb \ at91-kizboxmini-mb.dtb \ at91-kizboxmini-rd.dtb \ + at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts new file mode 100644 index 000000000000..dae7e7b68462 --- /dev/null +++ b/arch/arm/boot/dts/at91-smartkiz.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017-2018 Overkiz SAS + * Author: Mickael Gardet <m.gardet@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + * Dorian Rocipon <d.rocipon@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini_common.dtsi" + +/ { + model = "Overkiz SmartKiz"; + compatible = "overkiz,smartkiz", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + adc_op_clk { + status = "okay"; + }; + }; + + aliases { + serial5 = &uart0; + }; + + pio_keys { + hk_reset { + label = "HK_RESET"; + gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + }; + + power_rf { + label = "POWER_RF"; + gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + }; + + power_wifi { + label = "POWER_WIFI"; + gpios = <&pioA 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; + }; + }; + + adc0 { + pinctrl_adc0_ad0: adc0_ad0-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad5: adc0_ad5-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad6: adc0_ad6-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad11: adc0_ad11-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +&macb0 { + status = "disabled"; +}; + +&rtc { + status = "okay"; +}; + +&leds { + blue { + status = "okay"; + }; +}; + +&adc0 { + atmel,adc-vref = <2500>; + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad11 + >; + atmel,adc-channels-used = <0x0861>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + -- 2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: Kamel Bouhara <kamel.bouhara@bootlin.com> To: Rob Herring <robh+dt@kernel.org>, Nicolas Ferre <nicolas.ferre@microchip.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Ludovic Desroches <ludovic.desroches@microchip.com>, linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, "Kamel Bouhara" <kamel.bouhara@bootlin.com>, "Mickael GARDET" <m.gardet@overkiz.com>, linux-kernel@vger.kernel.org, "Kévin RAYMOND" <k.raymond@overkiz.com>, "Thomas Petazzoni" <thomas.petazzoni@bootlin.com> Subject: [PATCH 2/2] ARM: at91: add support for SmartKiz board Date: Fri, 18 Oct 2019 16:06:58 +0200 [thread overview] Message-ID: <20191018140658.31703-3-kamel.bouhara@bootlin.com> (raw) In-Reply-To: <20191018140658.31703-1-kamel.bouhara@bootlin.com> Add the devicetree for the Overkiz's SmartKiz board. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com> Signed-off-by: Mickael GARDET <m.gardet@overkiz.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-smartkiz.dts | 112 ++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) create mode 100644 arch/arm/boot/dts/at91-smartkiz.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6b3a65f3f6f8..12a6b8c6b27e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -40,6 +40,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ at91-kizboxmini.dtb \ at91-kizboxmini-mb.dtb \ at91-kizboxmini-rd.dtb \ + at91-smartkiz.dtb \ at91-wb45n.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts new file mode 100644 index 000000000000..dae7e7b68462 --- /dev/null +++ b/arch/arm/boot/dts/at91-smartkiz.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017-2018 Overkiz SAS + * Author: Mickael Gardet <m.gardet@overkiz.com> + * Kévin Raymond <k.raymond@overkiz.com> + * Dorian Rocipon <d.rocipon@overkiz.com> + */ +/dts-v1/; +#include "at91-kizboxmini_common.dtsi" + +/ { + model = "Overkiz SmartKiz"; + compatible = "overkiz,smartkiz", "atmel,at91sam9g25", + "atmel,at91sam9x5", "atmel,at91sam9"; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + adc_op_clk { + status = "okay"; + }; + }; + + aliases { + serial5 = &uart0; + }; + + pio_keys { + hk_reset { + label = "HK_RESET"; + gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + }; + + power_rf { + label = "POWER_RF"; + gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; + }; + + power_wifi { + label = "POWER_WIFI"; + gpios = <&pioA 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP + AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; + }; + }; + + adc0 { + pinctrl_adc0_ad0: adc0_ad0-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad5: adc0_ad5-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad6: adc0_ad6-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad11: adc0_ad11-0 { + /* pull-up disable */ + atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; +}; + +&i2c1 { + dmas = <0>, <0>; + pinctrl-0 = <&pinctrl_i2c1>; + status = "disabled"; +}; + +&macb0 { + status = "disabled"; +}; + +&rtc { + status = "okay"; +}; + +&leds { + blue { + status = "okay"; + }; +}; + +&adc0 { + atmel,adc-vref = <2500>; + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad11 + >; + atmel,adc-channels-used = <0x0861>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + -- 2.23.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-18 14:07 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-18 14:06 [PATCH RESEND 0/2] Add DTS for Smartkiz support Kamel Bouhara 2019-10-18 14:06 ` Kamel Bouhara 2019-10-18 14:06 ` [PATCH 1/2] dt-bindings: arm: at91: Document SmartKiz board binding Kamel Bouhara 2019-10-18 14:06 ` Kamel Bouhara 2019-10-29 12:38 ` Rob Herring 2019-10-29 12:38 ` Rob Herring 2019-11-06 8:34 ` Kamel Bouhara 2019-10-18 14:06 ` Kamel Bouhara [this message] 2019-10-18 14:06 ` [PATCH 2/2] ARM: at91: add support for SmartKiz board Kamel Bouhara
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191018140658.31703-3-kamel.bouhara@bootlin.com \ --to=kamel.bouhara@bootlin.com \ --cc=alexandre.belloni@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=k.raymond@overkiz.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=ludovic.desroches@microchip.com \ --cc=m.gardet@overkiz.com \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ --cc=thomas.petazzoni@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.