All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mans Rullgard <mans@mansr.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Chen-Yu Tsai <wens@csie.org>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] net: ethernet: dwmac-sun8i: show message only when switching to promisc
Date: Fri, 18 Oct 2019 17:56:58 +0100	[thread overview]
Message-ID: <20191018165658.9752-1-mans@mansr.com> (raw)

Printing the info message every time more than the max number of mac
addresses are requested generates unnecessary log spam.  Showing it only
when the hw is not already in promiscous mode is equally informative
without being annoying.

Signed-off-by: Mans Rullgard <mans@mansr.com>
---
Changed in v2:
- test only RXALL bit
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 79c91526f3ec..c186de64e552 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -646,7 +646,8 @@ static void sun8i_dwmac_set_filter(struct mac_device_info *hw,
 			}
 		}
 	} else {
-		netdev_info(dev, "Too many address, switching to promiscuous\n");
+		if (!(readl(ioaddr + EMAC_RX_FRM_FLT) & EMAC_FRM_FLT_RXALL))
+			netdev_info(dev, "Too many address, switching to promiscuous\n");
 		v = EMAC_FRM_FLT_RXALL;
 	}
 
-- 
2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: Mans Rullgard <mans@mansr.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	Jose Abreu <joabreu@synopsys.com>
Cc: netdev@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>,
	"David S. Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] net: ethernet: dwmac-sun8i: show message only when switching to promisc
Date: Fri, 18 Oct 2019 17:56:58 +0100	[thread overview]
Message-ID: <20191018165658.9752-1-mans@mansr.com> (raw)

Printing the info message every time more than the max number of mac
addresses are requested generates unnecessary log spam.  Showing it only
when the hw is not already in promiscous mode is equally informative
without being annoying.

Signed-off-by: Mans Rullgard <mans@mansr.com>
---
Changed in v2:
- test only RXALL bit
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index 79c91526f3ec..c186de64e552 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -646,7 +646,8 @@ static void sun8i_dwmac_set_filter(struct mac_device_info *hw,
 			}
 		}
 	} else {
-		netdev_info(dev, "Too many address, switching to promiscuous\n");
+		if (!(readl(ioaddr + EMAC_RX_FRM_FLT) & EMAC_FRM_FLT_RXALL))
+			netdev_info(dev, "Too many address, switching to promiscuous\n");
 		v = EMAC_FRM_FLT_RXALL;
 	}
 
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-10-18 16:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-18 16:56 Mans Rullgard [this message]
2019-10-18 16:56 ` [PATCH v2] net: ethernet: dwmac-sun8i: show message only when switching to promisc Mans Rullgard
2019-10-19 19:18 ` David Miller
2019-10-19 19:18   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191018165658.9752-1-mans@mansr.com \
    --to=mans@mansr.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.