From: megous@megous.com To: linux-sunxi@googlegroups.com, Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>, Thomas Gleixner <tglx@linutronix.de>, Arnd Bergmann <arnd@arndb.de> Cc: Ondrej Jirman <megous@megous.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Paul Kocialkowski <paul.kocialkowski@bootlin.com>, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/4] arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support Date: Sun, 20 Oct 2019 15:42:29 +0200 [thread overview] Message-ID: <20191020134229.1216351-5-megous@megous.com> (raw) In-Reply-To: <20191020134229.1216351-1-megous@megous.com> From: Ondrej Jirman <megous@megous.com> Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0 port. All four ports are exposed via USB3-A connectors. VBUS is always on, since it's powered directly from DCIN (VCC-5V) and not switchable. Signed-off-by: Ondrej Jirman <megous@megous.com> --- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index eb379cd402ac..259af5b0f1a7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -94,6 +94,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -285,3 +289,7 @@ usb3_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; -- 2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: megous@megous.com To: linux-sunxi@googlegroups.com, Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>, Thomas Gleixner <tglx@linutronix.de>, Arnd Bergmann <arnd@arndb.de> Cc: Ondrej Jirman <megous@megous.com>, devicetree@vger.kernel.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, linux-kernel@vger.kernel.org, Paul Kocialkowski <paul.kocialkowski@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/4] arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support Date: Sun, 20 Oct 2019 15:42:29 +0200 [thread overview] Message-ID: <20191020134229.1216351-5-megous@megous.com> (raw) In-Reply-To: <20191020134229.1216351-1-megous@megous.com> From: Ondrej Jirman <megous@megous.com> Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0 port. All four ports are exposed via USB3-A connectors. VBUS is always on, since it's powered directly from DCIN (VCC-5V) and not switchable. Signed-off-by: Ondrej Jirman <megous@megous.com> --- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index eb379cd402ac..259af5b0f1a7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -94,6 +94,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -285,3 +289,7 @@ usb3_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; -- 2.23.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-20 13:42 UTC|newest] Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-20 13:42 [PATCH 0/4] Add USB 3 support for H6 and Orange Pi 3 megous 2019-10-20 13:42 ` megous 2019-10-20 13:42 ` [PATCH 1/4] dt-bindings: Add bindings for USB3 phy on Allwinner H6 megous 2019-10-20 13:42 ` megous 2019-10-21 11:06 ` Maxime Ripard 2019-10-21 11:06 ` Maxime Ripard 2019-10-20 13:42 ` [PATCH 2/4] phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC megous 2019-10-20 13:42 ` megous 2019-10-21 11:08 ` Maxime Ripard 2019-10-21 11:08 ` Maxime Ripard 2019-11-07 20:46 ` [PATCH] phy: allwinner: Fix GENMASK misuse Rikard Falkeborn 2019-11-07 20:46 ` Rikard Falkeborn 2019-11-07 21:45 ` Ondřej Jirman 2019-11-07 21:45 ` Ondřej Jirman 2019-11-08 11:29 ` Icenowy Zheng 2019-11-08 11:29 ` Icenowy Zheng 2019-11-08 11:41 ` Ondřej Jirman 2019-11-08 11:41 ` Ondřej Jirman 2019-11-08 11:43 ` Ondřej Jirman 2019-11-08 11:43 ` Ondřej Jirman 2019-11-07 23:39 ` Russell King - ARM Linux admin 2019-11-07 23:39 ` Russell King - ARM Linux admin 2019-11-08 1:46 ` Joe Perches 2019-11-08 1:46 ` Joe Perches 2019-11-08 8:29 ` Paul Kocialkowski 2019-11-08 8:29 ` Paul Kocialkowski 2019-11-10 12:43 ` [PATCH v2] " Rikard Falkeborn 2020-02-22 23:41 ` [PATCH v2 RESEND] " Ondrej Jirman 2019-11-10 12:43 ` [PATCH v2] " Rikard Falkeborn 2019-11-24 22:10 ` Rikard Falkeborn 2019-11-24 22:10 ` Rikard Falkeborn 2019-12-09 20:18 ` Rikard Falkeborn 2019-12-09 20:18 ` Rikard Falkeborn 2020-02-23 3:23 ` [linux-sunxi] [PATCH v2 RESEND] " Chen-Yu Tsai 2020-02-23 3:23 ` Chen-Yu Tsai 2020-02-24 9:18 ` Maxime Ripard 2020-02-24 9:18 ` Maxime Ripard 2019-10-20 13:42 ` [PATCH 3/4] arm64: dts: allwinner: h6: add USB3 device nodes megous 2019-10-20 13:42 ` megous 2019-10-20 13:42 ` megous [this message] 2019-10-20 13:42 ` [PATCH 4/4] arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support megous 2019-10-21 11:09 ` Maxime Ripard 2019-10-21 11:09 ` Maxime Ripard 2019-11-04 12:16 ` Ondřej Jirman 2019-11-04 12:16 ` Ondřej Jirman 2019-11-05 10:45 ` Maxime Ripard 2019-11-05 10:45 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191020134229.1216351-5-megous@megous.com \ --to=megous@megous.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=icenowy@aosc.io \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=mark.rutland@arm.com \ --cc=mripard@kernel.org \ --cc=paul.kocialkowski@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=tglx@linutronix.de \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.