All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Andrew Lunn <andrew@lunn.ch>, Chris Snook <chris.snook@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	James Hogan <jhogan@kernel.org>, Jay Cliburn <jcliburn@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Paul Burton <paul.burton@mips.com>,
	Ralf Baechle <ralf@linux-mips.org>,
	Rob Herring <robh+dt@kernel.org>,
	Vivien Didelot <vivien.didelot@gmail.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
	Russell King <linux@armlinux.org.uk>
Subject: [PATCH v4 3/5] MIPS: ath79: ar9331: add ar9331-switch node
Date: Tue, 22 Oct 2019 07:57:41 +0200	[thread overview]
Message-ID: <20191022055743.6832-4-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20191022055743.6832-1-o.rempel@pengutronix.de>

Add switch node supported by dsa ar9331 driver.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/mips/boot/dts/qca/ar9331.dtsi           | 127 ++++++++++++++++++-
 arch/mips/boot/dts/qca/ar9331_dpt_module.dts |  13 ++
 2 files changed, 139 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
index e0f409dd6acf..84a177c0d053 100644
--- a/arch/mips/boot/dts/qca/ar9331.dtsi
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -158,6 +158,9 @@
 			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
 			clock-names = "eth", "mdio";
 
+			phy-mode = "mii";
+			phy-handle = <&phy_port4>;
+
 			status = "disabled";
 		};
 
@@ -165,13 +168,135 @@
 			compatible = "qca,ar9330-eth";
 			reg = <0x1a000000 0x200>;
 			interrupts = <5>;
-
 			resets = <&rst 13>, <&rst 23>;
 			reset-names = "mac", "mdio";
 			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
 			clock-names = "eth", "mdio";
 
+			phy-mode = "gmii";
+
 			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch10: switch@10 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compatible = "qca,ar9331-switch";
+					reg = <0x10>;
+					resets = <&rst 8>;
+					reset-names = "switch";
+
+					interrupt-parent = <&miscintc>;
+					interrupts = <12>;
+
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						switch_port0: port@0 {
+							reg = <0x0>;
+							label = "cpu";
+							ethernet = <&eth1>;
+
+							phy-mode = "gmii";
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+
+						switch_port1: port@1 {
+							reg = <0x1>;
+							phy-handle = <&phy_port0>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port2: port@2 {
+							reg = <0x2>;
+							phy-handle = <&phy_port1>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port3: port@3 {
+							reg = <0x3>;
+							phy-handle = <&phy_port2>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port4: port@4 {
+							reg = <0x4>;
+							phy-handle = <&phy_port3>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port5: port@5 {
+							reg = <0x5>;
+							phy-handle = <&phy_port4>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+					};
+
+					mdio {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						interrupt-parent = <&switch10>;
+
+						phy_port0: phy@0 {
+							reg = <0x0>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port1: phy@1 {
+							reg = <0x1>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port2: phy@2 {
+							reg = <0x2>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port3: phy@3 {
+							reg = <0x3>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port4: phy@4 {
+							reg = <0x4>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+					};
+				};
+			};
 		};
 
 		usb: usb@1b000100 {
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
index 77bab823eb3b..0f2b20044834 100644
--- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -84,3 +84,16 @@
 &eth1 {
 	status = "okay";
 };
+
+&switch_port1 {
+	label = "lan0";
+	status = "okay";
+};
+
+&phy_port0 {
+	status = "okay";
+};
+
+&phy_port4 {
+	status = "okay";
+};
-- 
2.23.0


  parent reply	other threads:[~2019-10-22  5:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-22  5:57 [PATCH v4 0/5] add dsa switch support for ar9331 Oleksij Rempel
2019-10-22  5:57 ` [PATCH v4 1/5] net: ag71xx: port to phylink Oleksij Rempel
2019-10-22  5:57 ` [PATCH v4 2/5] dt-bindings: net: dsa: qca,ar9331 switch documentation Oleksij Rempel
2019-10-23  0:35   ` Andrew Lunn
2019-10-29  7:34     ` Oleksij Rempel
2019-12-15 14:57       ` Oleksij Rempel
2019-12-17  8:44         ` Andrew Lunn
2019-10-22  5:57 ` Oleksij Rempel [this message]
2019-10-22  5:57 ` [PATCH v4 4/5] net: dsa: add support for Atheros AR9331 TAG format Oleksij Rempel
2019-10-22  6:10   ` Randy Dunlap
2019-10-23  0:37   ` Andrew Lunn
2019-10-22  5:57 ` [PATCH v4 5/5] net: dsa: add support for Atheros AR9331 build-in switch Oleksij Rempel
2019-10-22  6:10   ` Randy Dunlap
2019-10-23  0:58   ` Andrew Lunn
2019-10-29  7:14     ` Oleksij Rempel
2019-10-29 12:38       ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191022055743.6832-4-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=andrew@lunn.ch \
    --cc=chris.snook@gmail.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jcliburn@gmail.com \
    --cc=jhogan@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.