All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eugeniu Rosca <erosca@de.adit-jv.com>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, <alsa-devel@alsa-project.org>,
	<linux-kernel@vger.kernel.org>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>,
	Eugeniu Rosca <roscaeugeniu@gmail.com>,
	Jiada Wang <jiada_wang@mentor.com>,
	Andrew Gabbasov <andrew_gabbasov@mentor.com>,
	Timo Wischer <twischer@de.adit-jv.com>
Subject: [PATCH] ASoC: rsnd: dma: set bus width to data width for monaural data
Date: Tue, 22 Oct 2019 20:55:18 +0200	[thread overview]
Message-ID: <20191022185518.12838-1-erosca@de.adit-jv.com> (raw)

From: Jiada Wang <jiada_wang@mentor.com>

According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.

Therefore set src and dst's DMA bus width to:
 - [monaural case] data width
 - [non-monaural case] 32bits (as prior applying the patch)

Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
---
 sound/soc/sh/rcar/dma.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c
index 28f65eba2bb4..95aa26d62e4f 100644
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -165,14 +165,40 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod,
 	struct device *dev = rsnd_priv_to_dev(priv);
 	struct dma_async_tx_descriptor *desc;
 	struct dma_slave_config cfg = {};
+	enum dma_slave_buswidth buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	int is_play = rsnd_io_is_play(io);
 	int ret;
 
+	/*
+	 * in case of monaural data writing or reading through Audio-DMAC
+	 * data is always in Left Justified format, so both src and dst
+	 * DMA Bus width need to be set equal to physical data width.
+	 */
+	if (rsnd_runtime_channel_original(io) == 1) {
+		struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
+		int bits = snd_pcm_format_physical_width(runtime->format);
+
+		switch (bits) {
+		case 8:
+			buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+			break;
+		case 16:
+			buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+			break;
+		case 32:
+			buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			break;
+		default:
+			dev_err(dev, "invalid format width %d\n", bits);
+			return -EINVAL;
+		}
+	}
+
 	cfg.direction	= is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
 	cfg.src_addr	= dma->src_addr;
 	cfg.dst_addr	= dma->dst_addr;
-	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	cfg.src_addr_width = buswidth;
+	cfg.dst_addr_width = buswidth;
 
 	dev_dbg(dev, "%s %pad -> %pad\n",
 		rsnd_mod_name(mod),
-- 
2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: Eugeniu Rosca <erosca@de.adit-jv.com>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, <alsa-devel@alsa-project.org>,
	<linux-kernel@vger.kernel.org>
Cc: Jiada Wang <jiada_wang@mentor.com>,
	Andrew Gabbasov <andrew_gabbasov@mentor.com>,
	Eugeniu Rosca <erosca@de.adit-jv.com>,
	Timo Wischer <twischer@de.adit-jv.com>,
	Eugeniu Rosca <roscaeugeniu@gmail.com>
Subject: [alsa-devel] [PATCH] ASoC: rsnd: dma: set bus width to data width for monaural data
Date: Tue, 22 Oct 2019 20:55:18 +0200	[thread overview]
Message-ID: <20191022185518.12838-1-erosca@de.adit-jv.com> (raw)

From: Jiada Wang <jiada_wang@mentor.com>

According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.

Therefore set src and dst's DMA bus width to:
 - [monaural case] data width
 - [non-monaural case] 32bits (as prior applying the patch)

Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Cc: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
---
 sound/soc/sh/rcar/dma.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c
index 28f65eba2bb4..95aa26d62e4f 100644
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -165,14 +165,40 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod,
 	struct device *dev = rsnd_priv_to_dev(priv);
 	struct dma_async_tx_descriptor *desc;
 	struct dma_slave_config cfg = {};
+	enum dma_slave_buswidth buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	int is_play = rsnd_io_is_play(io);
 	int ret;
 
+	/*
+	 * in case of monaural data writing or reading through Audio-DMAC
+	 * data is always in Left Justified format, so both src and dst
+	 * DMA Bus width need to be set equal to physical data width.
+	 */
+	if (rsnd_runtime_channel_original(io) == 1) {
+		struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
+		int bits = snd_pcm_format_physical_width(runtime->format);
+
+		switch (bits) {
+		case 8:
+			buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+			break;
+		case 16:
+			buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+			break;
+		case 32:
+			buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			break;
+		default:
+			dev_err(dev, "invalid format width %d\n", bits);
+			return -EINVAL;
+		}
+	}
+
 	cfg.direction	= is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
 	cfg.src_addr	= dma->src_addr;
 	cfg.dst_addr	= dma->dst_addr;
-	cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	cfg.src_addr_width = buswidth;
+	cfg.dst_addr_width = buswidth;
 
 	dev_dbg(dev, "%s %pad -> %pad\n",
 		rsnd_mod_name(mod),
-- 
2.23.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

             reply	other threads:[~2019-10-22 18:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-22 18:55 Eugeniu Rosca [this message]
2019-10-22 18:55 ` [alsa-devel] [PATCH] ASoC: rsnd: dma: set bus width to data width for monaural data Eugeniu Rosca
2019-10-23  0:56 ` Kuninori Morimoto
2019-10-23  0:56   ` [alsa-devel] " Kuninori Morimoto
2019-10-23 18:56 ` Applied "ASoC: rsnd: dma: set bus width to data width for monaural data" to the asoc tree Mark Brown
2019-10-23 18:56   ` [alsa-devel] " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191022185518.12838-1-erosca@de.adit-jv.com \
    --to=erosca@de.adit-jv.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andrew_gabbasov@mentor.com \
    --cc=broonie@kernel.org \
    --cc=jiada_wang@mentor.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=roscaeugeniu@gmail.com \
    --cc=tiwai@suse.com \
    --cc=twischer@de.adit-jv.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.