All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jianyong Wu <jianyong.wu@arm.com>
To: netdev@vger.kernel.org, yangbo.lu@nxp.com,
	john.stultz@linaro.org, tglx@linutronix.de, pbonzini@redhat.com,
	sean.j.christopherson@intel.com, maz@kernel.org,
	richardcochran@gmail.com, Mark.Rutland@arm.com, will@kernel.org,
	suzuki.poulose@arm.com
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	Steve.Capper@arm.com, Kaly.Xin@arm.com, justin.he@arm.com,
	jianyong.wu@arm.com, nd@arm.com
Subject: [RFC PATCH v6 6/7] ptp: arm64: Enable ptp_kvm for arm64
Date: Thu, 24 Oct 2019 19:02:08 +0800	[thread overview]
Message-ID: <20191024110209.21328-7-jianyong.wu@arm.com> (raw)
In-Reply-To: <20191024110209.21328-1-jianyong.wu@arm.com>

Currently in arm64 virtualization environment, there is no mechanism to
keep time sync between guest and host. Time in guest will drift compared
with host after boot up as they may both use third party time sources
to correct their time respectively. The time deviation will be in order
of milliseconds but some scenarios ask for higher time precision, like
in cloud envirenment, we want all the VMs running in the host aquire the
same level accuracy from host clock.

Use of kvm ptp clock, which choose the host clock source clock as a
reference clock to sync time clock between guest and host has been adopted
by x86 which makes the time sync order from milliseconds to nanoseconds.

This patch enable kvm ptp on arm64 and we get the similar clock drift as
found with x86 with kvm ptp.

Test result comparison between with kvm ptp and without it in arm64 are
as follows. This test derived from the result of command 'chronyc
sources'. we should take more cure of the last sample column which shows
the offset between the local clock and the source at the last measurement.

no kvm ptp in guest:
MS Name/IP address   Stratum Poll Reach LastRx Last sample
========================================================================
^* dns1.synet.edu.cn      2   6   377    13  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    21  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    29  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    37  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    45  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    53  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    61  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377     4   -130us[ +796us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    12   -130us[ +796us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    20   -130us[ +796us] +/-   21ms

in host:
MS Name/IP address   Stratum Poll Reach LastRx Last sample
========================================================================
^* 120.25.115.20          2   7   377    72   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377    92   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377   112   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377     2   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    22   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    43   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    63   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    83   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377   103   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377   123   +872ns[-6808ns] +/-   17ms

The dns1.synet.edu.cn is the network reference clock for guest and
120.25.115.20 is the network reference clock for host. we can't get the
clock error between guest and host directly, but a roughly estimated value
will be in order of hundreds of us to ms.

with kvm ptp in guest:
chrony has been disabled in host to remove the disturb by network clock.

MS Name/IP address         Stratum Poll Reach LastRx Last sample
========================================================================
* PHC0                    0   3   377     8     -7ns[   +1ns] +/-    3ns
* PHC0                    0   3   377     8     +1ns[  +16ns] +/-    3ns
* PHC0                    0   3   377     6     -4ns[   -0ns] +/-    6ns
* PHC0                    0   3   377     6     -8ns[  -12ns] +/-    5ns
* PHC0                    0   3   377     5     +2ns[   +4ns] +/-    4ns
* PHC0                    0   3   377    13     +2ns[   +4ns] +/-    4ns
* PHC0                    0   3   377    12     -4ns[   -6ns] +/-    4ns
* PHC0                    0   3   377    11     -8ns[  -11ns] +/-    6ns
* PHC0                    0   3   377    10    -14ns[  -20ns] +/-    4ns
* PHC0                    0   3   377     8     +4ns[   +5ns] +/-    4ns

The PHC0 is the ptp clock which choose the host clock as its source
clock. So we can be sure to say that the clock error between host and guest
is in order of ns.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
---
 drivers/clocksource/arm_arch_timer.c | 22 ++++++++++++
 drivers/ptp/Kconfig                  |  2 +-
 drivers/ptp/ptp_kvm_arm64.c          | 54 ++++++++++++++++++++++++++++
 3 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 drivers/ptp/ptp_kvm_arm64.c

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index e4ad38042ef6..fe0ed8acfa33 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -1636,3 +1636,25 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 }
 TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif
+
+#if IS_ENABLED(CONFIG_PTP_1588_CLOCK_KVM)
+#include <linux/arm-smccc.h>
+int kvm_arch_ptp_get_clock_fn(unsigned long *cycle, struct timespec64 *ts,
+			      struct clocksource **cs)
+{
+	struct arm_smccc_res hvc_res;
+	ktime_t ktime_overall;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID, &hvc_res);
+	if ((long)(hvc_res.a0) < 0)
+		return -EOPNOTSUPP;
+
+	ktime_overall = hvc_res.a0 << 32 | hvc_res.a1;
+	*ts = ktime_to_timespec64(ktime_overall);
+	*cycle = hvc_res.a2 << 32 | hvc_res.a3;
+	*cs = &clocksource_counter;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_clock_fn);
+#endif
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 9b8fee5178e8..3c31ff8eb05f 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -110,7 +110,7 @@ config PTP_1588_CLOCK_PCH
 config PTP_1588_CLOCK_KVM
 	tristate "KVM virtual PTP clock"
 	depends on PTP_1588_CLOCK
-	depends on KVM_GUEST && X86
+	depends on KVM_GUEST && X86 || ARM64 && ARM_ARCH_TIMER
 	default y
 	help
 	  This driver adds support for using kvm infrastructure as a PTP
diff --git a/drivers/ptp/ptp_kvm_arm64.c b/drivers/ptp/ptp_kvm_arm64.c
new file mode 100644
index 000000000000..7c697f20904f
--- /dev/null
+++ b/drivers/ptp/ptp_kvm_arm64.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Virtual PTP 1588 clock for use with KVM guests
+ *  Copyright (C) 2019 ARM Ltd.
+ *  All Rights Reserved
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <asm/hypervisor.h>
+#include <linux/module.h>
+#include <linux/psci.h>
+#include <linux/arm-smccc.h>
+#include <linux/timecounter.h>
+#include <linux/sched/clock.h>
+#include <asm/arch_timer.h>
+
+int kvm_arch_ptp_init(void)
+{
+	struct arm_smccc_res hvc_res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
+			     &hvc_res);
+	if ((long)(hvc_res.a0) < 0)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+int kvm_arch_ptp_get_clock_generic(struct timespec64 *ts,
+				   struct arm_smccc_res *hvc_res)
+{
+	u64 ns;
+	ktime_t ktime_overall;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
+				  hvc_res);
+	if ((long)(hvc_res->a0) < 0)
+		return -EOPNOTSUPP;
+
+	ktime_overall = hvc_res->a0 << 32 | hvc_res->a1;
+	*ts = ktime_to_timespec64(ktime_overall);
+
+	return 0;
+}
+
+int kvm_arch_ptp_get_clock(struct timespec64 *ts)
+{
+	struct arm_smccc_res hvc_res;
+
+	kvm_arch_ptp_get_clock_generic(ts, &hvc_res);
+
+	return 0;
+}
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Jianyong Wu <jianyong.wu@arm.com>
To: netdev@vger.kernel.org, yangbo.lu@nxp.com,
	john.stultz@linaro.org, tglx@linutronix.de, pbonzini@redhat.com,
	sean.j.christopherson@intel.com, maz@kernel.org,
	richardcochran@gmail.com, Mark.Rutland@arm.com, will@kernel.org,
	suzuki.poulose@arm.com
Cc: justin.he@arm.com, kvm@vger.kernel.org,
	linux-kernel@vger.kernel.org, nd@arm.com,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v6 6/7] ptp: arm64: Enable ptp_kvm for arm64
Date: Thu, 24 Oct 2019 19:02:08 +0800	[thread overview]
Message-ID: <20191024110209.21328-7-jianyong.wu@arm.com> (raw)
In-Reply-To: <20191024110209.21328-1-jianyong.wu@arm.com>

Currently in arm64 virtualization environment, there is no mechanism to
keep time sync between guest and host. Time in guest will drift compared
with host after boot up as they may both use third party time sources
to correct their time respectively. The time deviation will be in order
of milliseconds but some scenarios ask for higher time precision, like
in cloud envirenment, we want all the VMs running in the host aquire the
same level accuracy from host clock.

Use of kvm ptp clock, which choose the host clock source clock as a
reference clock to sync time clock between guest and host has been adopted
by x86 which makes the time sync order from milliseconds to nanoseconds.

This patch enable kvm ptp on arm64 and we get the similar clock drift as
found with x86 with kvm ptp.

Test result comparison between with kvm ptp and without it in arm64 are
as follows. This test derived from the result of command 'chronyc
sources'. we should take more cure of the last sample column which shows
the offset between the local clock and the source at the last measurement.

no kvm ptp in guest:
MS Name/IP address   Stratum Poll Reach LastRx Last sample
========================================================================
^* dns1.synet.edu.cn      2   6   377    13  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    21  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    29  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    37  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    45  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    53  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    61  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377     4   -130us[ +796us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    12   -130us[ +796us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    20   -130us[ +796us] +/-   21ms

in host:
MS Name/IP address   Stratum Poll Reach LastRx Last sample
========================================================================
^* 120.25.115.20          2   7   377    72   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377    92   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377   112   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377     2   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    22   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    43   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    63   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    83   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377   103   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377   123   +872ns[-6808ns] +/-   17ms

The dns1.synet.edu.cn is the network reference clock for guest and
120.25.115.20 is the network reference clock for host. we can't get the
clock error between guest and host directly, but a roughly estimated value
will be in order of hundreds of us to ms.

with kvm ptp in guest:
chrony has been disabled in host to remove the disturb by network clock.

MS Name/IP address         Stratum Poll Reach LastRx Last sample
========================================================================
* PHC0                    0   3   377     8     -7ns[   +1ns] +/-    3ns
* PHC0                    0   3   377     8     +1ns[  +16ns] +/-    3ns
* PHC0                    0   3   377     6     -4ns[   -0ns] +/-    6ns
* PHC0                    0   3   377     6     -8ns[  -12ns] +/-    5ns
* PHC0                    0   3   377     5     +2ns[   +4ns] +/-    4ns
* PHC0                    0   3   377    13     +2ns[   +4ns] +/-    4ns
* PHC0                    0   3   377    12     -4ns[   -6ns] +/-    4ns
* PHC0                    0   3   377    11     -8ns[  -11ns] +/-    6ns
* PHC0                    0   3   377    10    -14ns[  -20ns] +/-    4ns
* PHC0                    0   3   377     8     +4ns[   +5ns] +/-    4ns

The PHC0 is the ptp clock which choose the host clock as its source
clock. So we can be sure to say that the clock error between host and guest
is in order of ns.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
---
 drivers/clocksource/arm_arch_timer.c | 22 ++++++++++++
 drivers/ptp/Kconfig                  |  2 +-
 drivers/ptp/ptp_kvm_arm64.c          | 54 ++++++++++++++++++++++++++++
 3 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 drivers/ptp/ptp_kvm_arm64.c

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index e4ad38042ef6..fe0ed8acfa33 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -1636,3 +1636,25 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 }
 TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif
+
+#if IS_ENABLED(CONFIG_PTP_1588_CLOCK_KVM)
+#include <linux/arm-smccc.h>
+int kvm_arch_ptp_get_clock_fn(unsigned long *cycle, struct timespec64 *ts,
+			      struct clocksource **cs)
+{
+	struct arm_smccc_res hvc_res;
+	ktime_t ktime_overall;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID, &hvc_res);
+	if ((long)(hvc_res.a0) < 0)
+		return -EOPNOTSUPP;
+
+	ktime_overall = hvc_res.a0 << 32 | hvc_res.a1;
+	*ts = ktime_to_timespec64(ktime_overall);
+	*cycle = hvc_res.a2 << 32 | hvc_res.a3;
+	*cs = &clocksource_counter;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_clock_fn);
+#endif
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 9b8fee5178e8..3c31ff8eb05f 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -110,7 +110,7 @@ config PTP_1588_CLOCK_PCH
 config PTP_1588_CLOCK_KVM
 	tristate "KVM virtual PTP clock"
 	depends on PTP_1588_CLOCK
-	depends on KVM_GUEST && X86
+	depends on KVM_GUEST && X86 || ARM64 && ARM_ARCH_TIMER
 	default y
 	help
 	  This driver adds support for using kvm infrastructure as a PTP
diff --git a/drivers/ptp/ptp_kvm_arm64.c b/drivers/ptp/ptp_kvm_arm64.c
new file mode 100644
index 000000000000..7c697f20904f
--- /dev/null
+++ b/drivers/ptp/ptp_kvm_arm64.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Virtual PTP 1588 clock for use with KVM guests
+ *  Copyright (C) 2019 ARM Ltd.
+ *  All Rights Reserved
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <asm/hypervisor.h>
+#include <linux/module.h>
+#include <linux/psci.h>
+#include <linux/arm-smccc.h>
+#include <linux/timecounter.h>
+#include <linux/sched/clock.h>
+#include <asm/arch_timer.h>
+
+int kvm_arch_ptp_init(void)
+{
+	struct arm_smccc_res hvc_res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
+			     &hvc_res);
+	if ((long)(hvc_res.a0) < 0)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+int kvm_arch_ptp_get_clock_generic(struct timespec64 *ts,
+				   struct arm_smccc_res *hvc_res)
+{
+	u64 ns;
+	ktime_t ktime_overall;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
+				  hvc_res);
+	if ((long)(hvc_res->a0) < 0)
+		return -EOPNOTSUPP;
+
+	ktime_overall = hvc_res->a0 << 32 | hvc_res->a1;
+	*ts = ktime_to_timespec64(ktime_overall);
+
+	return 0;
+}
+
+int kvm_arch_ptp_get_clock(struct timespec64 *ts)
+{
+	struct arm_smccc_res hvc_res;
+
+	kvm_arch_ptp_get_clock_generic(ts, &hvc_res);
+
+	return 0;
+}
-- 
2.17.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

WARNING: multiple messages have this Message-ID (diff)
From: Jianyong Wu <jianyong.wu@arm.com>
To: netdev@vger.kernel.org, yangbo.lu@nxp.com,
	john.stultz@linaro.org, tglx@linutronix.de, pbonzini@redhat.com,
	sean.j.christopherson@intel.com, maz@kernel.org,
	richardcochran@gmail.com, Mark.Rutland@arm.com, will@kernel.org,
	suzuki.poulose@arm.com
Cc: justin.he@arm.com, kvm@vger.kernel.org, Steve.Capper@arm.com,
	jianyong.wu@arm.com, linux-kernel@vger.kernel.org,
	Kaly.Xin@arm.com, nd@arm.com, kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v6 6/7] ptp: arm64: Enable ptp_kvm for arm64
Date: Thu, 24 Oct 2019 19:02:08 +0800	[thread overview]
Message-ID: <20191024110209.21328-7-jianyong.wu@arm.com> (raw)
In-Reply-To: <20191024110209.21328-1-jianyong.wu@arm.com>

Currently in arm64 virtualization environment, there is no mechanism to
keep time sync between guest and host. Time in guest will drift compared
with host after boot up as they may both use third party time sources
to correct their time respectively. The time deviation will be in order
of milliseconds but some scenarios ask for higher time precision, like
in cloud envirenment, we want all the VMs running in the host aquire the
same level accuracy from host clock.

Use of kvm ptp clock, which choose the host clock source clock as a
reference clock to sync time clock between guest and host has been adopted
by x86 which makes the time sync order from milliseconds to nanoseconds.

This patch enable kvm ptp on arm64 and we get the similar clock drift as
found with x86 with kvm ptp.

Test result comparison between with kvm ptp and without it in arm64 are
as follows. This test derived from the result of command 'chronyc
sources'. we should take more cure of the last sample column which shows
the offset between the local clock and the source at the last measurement.

no kvm ptp in guest:
MS Name/IP address   Stratum Poll Reach LastRx Last sample
========================================================================
^* dns1.synet.edu.cn      2   6   377    13  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    21  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    29  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    37  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    45  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    53  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    61  +1040us[+1581us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377     4   -130us[ +796us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    12   -130us[ +796us] +/-   21ms
^* dns1.synet.edu.cn      2   6   377    20   -130us[ +796us] +/-   21ms

in host:
MS Name/IP address   Stratum Poll Reach LastRx Last sample
========================================================================
^* 120.25.115.20          2   7   377    72   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377    92   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377   112   -470us[ -603us] +/-   18ms
^* 120.25.115.20          2   7   377     2   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    22   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    43   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    63   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377    83   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377   103   +872ns[-6808ns] +/-   17ms
^* 120.25.115.20          2   7   377   123   +872ns[-6808ns] +/-   17ms

The dns1.synet.edu.cn is the network reference clock for guest and
120.25.115.20 is the network reference clock for host. we can't get the
clock error between guest and host directly, but a roughly estimated value
will be in order of hundreds of us to ms.

with kvm ptp in guest:
chrony has been disabled in host to remove the disturb by network clock.

MS Name/IP address         Stratum Poll Reach LastRx Last sample
========================================================================
* PHC0                    0   3   377     8     -7ns[   +1ns] +/-    3ns
* PHC0                    0   3   377     8     +1ns[  +16ns] +/-    3ns
* PHC0                    0   3   377     6     -4ns[   -0ns] +/-    6ns
* PHC0                    0   3   377     6     -8ns[  -12ns] +/-    5ns
* PHC0                    0   3   377     5     +2ns[   +4ns] +/-    4ns
* PHC0                    0   3   377    13     +2ns[   +4ns] +/-    4ns
* PHC0                    0   3   377    12     -4ns[   -6ns] +/-    4ns
* PHC0                    0   3   377    11     -8ns[  -11ns] +/-    6ns
* PHC0                    0   3   377    10    -14ns[  -20ns] +/-    4ns
* PHC0                    0   3   377     8     +4ns[   +5ns] +/-    4ns

The PHC0 is the ptp clock which choose the host clock as its source
clock. So we can be sure to say that the clock error between host and guest
is in order of ns.

Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
---
 drivers/clocksource/arm_arch_timer.c | 22 ++++++++++++
 drivers/ptp/Kconfig                  |  2 +-
 drivers/ptp/ptp_kvm_arm64.c          | 54 ++++++++++++++++++++++++++++
 3 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 drivers/ptp/ptp_kvm_arm64.c

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index e4ad38042ef6..fe0ed8acfa33 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -1636,3 +1636,25 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 }
 TIMER_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif
+
+#if IS_ENABLED(CONFIG_PTP_1588_CLOCK_KVM)
+#include <linux/arm-smccc.h>
+int kvm_arch_ptp_get_clock_fn(unsigned long *cycle, struct timespec64 *ts,
+			      struct clocksource **cs)
+{
+	struct arm_smccc_res hvc_res;
+	ktime_t ktime_overall;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID, &hvc_res);
+	if ((long)(hvc_res.a0) < 0)
+		return -EOPNOTSUPP;
+
+	ktime_overall = hvc_res.a0 << 32 | hvc_res.a1;
+	*ts = ktime_to_timespec64(ktime_overall);
+	*cycle = hvc_res.a2 << 32 | hvc_res.a3;
+	*cs = &clocksource_counter;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_arch_ptp_get_clock_fn);
+#endif
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 9b8fee5178e8..3c31ff8eb05f 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -110,7 +110,7 @@ config PTP_1588_CLOCK_PCH
 config PTP_1588_CLOCK_KVM
 	tristate "KVM virtual PTP clock"
 	depends on PTP_1588_CLOCK
-	depends on KVM_GUEST && X86
+	depends on KVM_GUEST && X86 || ARM64 && ARM_ARCH_TIMER
 	default y
 	help
 	  This driver adds support for using kvm infrastructure as a PTP
diff --git a/drivers/ptp/ptp_kvm_arm64.c b/drivers/ptp/ptp_kvm_arm64.c
new file mode 100644
index 000000000000..7c697f20904f
--- /dev/null
+++ b/drivers/ptp/ptp_kvm_arm64.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Virtual PTP 1588 clock for use with KVM guests
+ *  Copyright (C) 2019 ARM Ltd.
+ *  All Rights Reserved
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <asm/hypervisor.h>
+#include <linux/module.h>
+#include <linux/psci.h>
+#include <linux/arm-smccc.h>
+#include <linux/timecounter.h>
+#include <linux/sched/clock.h>
+#include <asm/arch_timer.h>
+
+int kvm_arch_ptp_init(void)
+{
+	struct arm_smccc_res hvc_res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
+			     &hvc_res);
+	if ((long)(hvc_res.a0) < 0)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+int kvm_arch_ptp_get_clock_generic(struct timespec64 *ts,
+				   struct arm_smccc_res *hvc_res)
+{
+	u64 ns;
+	ktime_t ktime_overall;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID,
+				  hvc_res);
+	if ((long)(hvc_res->a0) < 0)
+		return -EOPNOTSUPP;
+
+	ktime_overall = hvc_res->a0 << 32 | hvc_res->a1;
+	*ts = ktime_to_timespec64(ktime_overall);
+
+	return 0;
+}
+
+int kvm_arch_ptp_get_clock(struct timespec64 *ts)
+{
+	struct arm_smccc_res hvc_res;
+
+	kvm_arch_ptp_get_clock_generic(ts, &hvc_res);
+
+	return 0;
+}
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-10-24 11:03 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-24 11:02 [RFC PATCH v6 0/7] Enable ptp_kvm for arm64 Jianyong Wu
2019-10-24 11:02 ` Jianyong Wu
2019-10-24 11:02 ` Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 1/7] arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit() Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 2/7] psci: Let arm_smccc_1_1_invoke available by modules Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 3/7] ptp: Reorganize ptp_kvm modules to make it arch-independent Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 4/7] time: Add mechanism to recognize clocksource in time_get_snapshot Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-11-07  7:55   ` Thomas Gleixner
2019-11-07  7:55     ` Thomas Gleixner
2019-11-07  7:55     ` Thomas Gleixner
2019-11-08  2:34     ` Jianyong Wu (Arm Technology China)
2019-11-08  2:34       ` Jianyong Wu (Arm Technology China)
2019-11-08  2:34       ` Jianyong Wu (Arm Technology China)
2019-10-24 11:02 ` [RFC PATCH v6 5/7] psci: Add hvc call service for ptp_kvm Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-11-07  8:01   ` Thomas Gleixner
2019-11-07  8:01     ` Thomas Gleixner
2019-11-07  8:01     ` Thomas Gleixner
2019-11-08  2:51     ` Jianyong Wu (Arm Technology China)
2019-11-08  2:51       ` Jianyong Wu (Arm Technology China)
2019-11-08  2:51       ` Jianyong Wu (Arm Technology China)
2019-10-24 11:02 ` Jianyong Wu [this message]
2019-10-24 11:02   ` [RFC PATCH v6 6/7] ptp: arm64: Enable ptp_kvm for arm64 Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02 ` [RFC PATCH v6 7/7] kvm: arm64: Add capability check extension for ptp_kvm Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-10-24 11:02   ` Jianyong Wu
2019-11-07  5:34 ` [RFC PATCH v6 0/7] Enable ptp_kvm for arm64 Jianyong Wu (Arm Technology China)
2019-11-07  5:34   ` Jianyong Wu (Arm Technology China)
2019-11-07  5:34   ` Jianyong Wu (Arm Technology China)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191024110209.21328-7-jianyong.wu@arm.com \
    --to=jianyong.wu@arm.com \
    --cc=Kaly.Xin@arm.com \
    --cc=Mark.Rutland@arm.com \
    --cc=Steve.Capper@arm.com \
    --cc=john.stultz@linaro.org \
    --cc=justin.he@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=nd@arm.com \
    --cc=netdev@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    --cc=yangbo.lu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.