[PATCH trivial] scsi: Fix various misspellings of "connect"

[Geert Uytterhoeven <geert+renesas@glider.be>]

Fix misspellings of "disonnect", "reconnect", "connection", "connected",
and "disconnection".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/scsi/arm/acornscsi.c          | 4 ++--
 drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h | 2 +-
 drivers/scsi/isci/remote_device.c     | 2 +-
 drivers/scsi/ncr53c8xx.c              | 2 +-
 drivers/scsi/nsp32.c                  | 2 +-
 drivers/scsi/qedf/qedf_dbg.h          | 2 +-
 drivers/scsi/qedi/qedi_dbg.h          | 2 +-
 7 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index d12dd89538df2990..ddb52e7ba6226b51 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -1067,7 +1067,7 @@ void acornscsi_dma_setup(AS_Host *host, dmadir_t direction)
  * Purpose : ensure that all DMA transfers are up-to-date & host->scsi.SCp is correct
  * Params  : host - host to finish
  * Notes   : This is called when a command is:
- *		terminating, RESTORE_POINTERS, SAVE_POINTERS, DISCONECT
+ *		terminating, RESTORE_POINTERS, SAVE_POINTERS, DISCONNECT
  *	   : This must not return until all transfers are completed.
  */
 static
@@ -1816,7 +1816,7 @@ int acornscsi_reconnect(AS_Host *host)
 }
 
 /*
- * Function: int acornscsi_reconect_finish(AS_Host *host)
+ * Function: int acornscsi_reconnect_finish(AS_Host *host)
  * Purpose : finish reconnecting a command
  * Params  : host - host to complete
  * Returns : 0 if failed
diff --git a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
index e4469df9c4695ab9..698f5ebaa0c29f98 100644
--- a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
+++ b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
@@ -813,7 +813,7 @@ struct fcoe_confqe {
 
 
 /*
- * FCoE conection data base
+ * FCoE connection data base
  */
 struct fcoe_conn_db {
 #if defined(__BIG_ENDIAN)
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 49aa4e657c44fc65..cd1e4b4d95bbbba0 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -1504,7 +1504,7 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport,
  * This function builds the isci_remote_device when a libsas dev_found message
  *    is received.
  * @isci_host: This parameter specifies the isci host object.
- * @port: This parameter specifies the isci_port conected to this device.
+ * @port: This parameter specifies the isci_port connected to this device.
  *
  * pointer to new isci_remote_device.
  */
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index e0b427fdf81800c3..11a2cb844ecb3782 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -1722,7 +1722,7 @@ struct ncb {
 	**	Miscellaneous configuration and status parameters.
 	**----------------------------------------------------------------
 	*/
-	u_char		disc;		/* Diconnection allowed		*/
+	u_char		disc;		/* Disconnection allowed	*/
 	u_char		scsi_mode;	/* Current SCSI BUS mode	*/
 	u_char		order;		/* Tag order to use		*/
 	u_char		verbose;	/* Verbosity for this controller*/
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 70db79254155677d..b6e04d14292d2f90 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1542,7 +1542,7 @@ static void nsp32_scsi_done(struct scsi_cmnd *SCpnt)
  * with ACK reply when below condition is matched:
  *	MsgIn 00: Command Complete.
  *	MsgIn 02: Save Data Pointer.
- *	MsgIn 04: Diconnect.
+ *	MsgIn 04: Disconnect.
  * In other case, unexpected BUSFREE is detected.
  */
 static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
diff --git a/drivers/scsi/qedf/qedf_dbg.h b/drivers/scsi/qedf/qedf_dbg.h
index d979f095aeda06a8..2386bfb73c4616aa 100644
--- a/drivers/scsi/qedf/qedf_dbg.h
+++ b/drivers/scsi/qedf/qedf_dbg.h
@@ -42,7 +42,7 @@ extern uint qedf_debug;
 #define QEDF_LOG_LPORT		0x4000		/* lport logs */
 #define QEDF_LOG_ELS		0x8000		/* ELS logs */
 #define QEDF_LOG_NPIV		0x10000		/* NPIV logs */
-#define QEDF_LOG_SESS		0x20000		/* Conection setup, cleanup */
+#define QEDF_LOG_SESS		0x20000		/* Connection setup, cleanup */
 #define QEDF_LOG_TID		0x80000         /*
 						 * FW TID context acquire
 						 * free
diff --git a/drivers/scsi/qedi/qedi_dbg.h b/drivers/scsi/qedi/qedi_dbg.h
index 243acc8b520a44a5..37d084086fd43410 100644
--- a/drivers/scsi/qedi/qedi_dbg.h
+++ b/drivers/scsi/qedi/qedi_dbg.h
@@ -44,7 +44,7 @@ extern uint qedi_dbg_log;
 #define QEDI_LOG_LPORT		0x4000		/* lport logs */
 #define QEDI_LOG_ELS		0x8000		/* ELS logs */
 #define QEDI_LOG_NPIV		0x10000		/* NPIV logs */
-#define QEDI_LOG_SESS		0x20000		/* Conection setup, cleanup */
+#define QEDI_LOG_SESS		0x20000		/* Connection setup, cleanup */
 #define QEDI_LOG_UIO		0x40000		/* iSCSI UIO logs */
 #define QEDI_LOG_TID		0x80000         /* FW TID context acquire,
 						 * free
-- 
2.17.1