All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Monakhov <dmonakhov@openvz.org>
To: fstests@vger.kernel.org
Cc: jack@suse.cz, Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Subject: [PATCH 1/2] add generic/585
Date: Thu, 31 Oct 2019 10:36:38 +0000	[thread overview]
Message-ID: <20191031103639.3786-1-dmonakhov@openvz.org> (raw)

From: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>

Quotasync may livelock if others tasks generate enough dirty dquots in parallel
This test case pefrorm fchown to produce dirty quotas

This test known to detect livelock non-journaled quota for kernels prior to v5.4

Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
---
 src/Makefile          |   2 +-
 src/chowner.c         | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/585     |  94 ++++++++++++++++++++++++++++++++++++++++++++
 tests/generic/585.out |   2 +
 tests/generic/group   |   1 +
 5 files changed, 205 insertions(+), 1 deletion(-)
 create mode 100644 src/chowner.c
 create mode 100755 tests/generic/585
 create mode 100644 tests/generic/585.out

diff --git a/src/Makefile b/src/Makefile
index ce6d861..b3ab7b4 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -28,7 +28,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
 	attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \
 	dio-invalidate-cache stat_test t_encrypted_d_revalidate \
 	attr_replace_test swapon mkswap t_attr_corruption t_open_tmpfiles \
-	fscrypt-crypt-util bulkstat_null_ocount
+	fscrypt-crypt-util bulkstat_null_ocount chowner
 
 SUBDIRS = log-writes perf
 
diff --git a/src/chowner.c b/src/chowner.c
new file mode 100644
index 0000000..043cd06
--- /dev/null
+++ b/src/chowner.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2019 YANDEX LLC.  All Rights Reserved.
+// Author: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <fcntl.h>
+#include <limits.h>
+
+char *progname;
+
+void usage(void)
+{
+	printf("Usage %s: [-b uid] [-e uid] [-g] [-P] [-t timeout] FNAME\n", progname);
+	printf("\t\t -b: begin of uid range\n");
+	printf("\t\t -e: length of uid range\n");
+	printf("\t\t -g: change group uid\n");
+	printf("\t\t -t: loop timeout\n");
+	printf("\t\t -P: Do not run chowner loop, only prepare files\n");
+	exit(1);
+}
+int main(int argc, char *const *argv)
+{
+	char *filename;
+	int fd;
+	int c;
+	uid_t begin = 2000;
+	uid_t end = 12000;
+	unsigned int timeout = 10;
+	struct timeval start, now, delta = { 0, 0 };
+	uid_t uid;
+	gid_t gid = getegid();
+	int do_group = 0;
+	int do_prepare = 0;
+
+	progname = argv[0];
+	while ((c = getopt(argc, argv, "b:e:gPt:")) != -1) {
+		switch (c) {
+		case 'b':
+			begin = atoi(optarg);
+			break;
+		case 'e':
+			end = atoi(optarg);
+			break;
+		case 'g':
+			do_group = 1;
+			break;
+		case 'P':
+			do_prepare = 1;
+			break;
+		case 't':
+			timeout = atoi(optarg);
+			break;
+		default:
+			usage();
+		}
+	}
+	if (optind == argc-1)
+		filename = argv[optind];
+	else
+		usage();
+	if (do_prepare) {
+		char path[PATH_MAX];
+		for (uid = begin; uid < end;uid++) {
+			sprintf(path, "%s.%d", filename, uid);
+			fd = open(path, O_RDWR|O_CREAT, 0666);
+			if (fd < 0) {
+				perror("open");
+				exit(1);
+			}
+			if (do_group)
+				gid = uid;
+			if (fchown(fd, uid, gid)) {
+				perror("chown");
+				exit(1);
+			}
+			close(fd);
+		}
+		return 0;
+	}
+	fd = open(filename, O_RDWR|O_CREAT, 0666);
+	if (fd < 0) {
+		perror("open");
+		exit(1);
+	}
+	gettimeofday(&start, NULL);
+
+	while (1) {
+		for (uid = begin; uid < end;uid++) {
+			if (do_group)
+				gid = uid;
+			if (fchown(fd, uid, gid)) {
+				perror("chown");
+				exit(1);
+			}
+		}
+		gettimeofday(&now, NULL);
+		timersub(&now, &start, &delta);
+		if (delta.tv_sec >= timeout)
+			break;
+	}
+	return 0;
+}
diff --git a/tests/generic/585 b/tests/generic/585
new file mode 100755
index 0000000..d37522a
--- /dev/null
+++ b/tests/generic/585
@@ -0,0 +1,94 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019 YANDEX LLC.  All Rights Reserved.
+#
+# FS QA Test 585
+#
+# Check livelock during quota-sync  while other tasks dirty quotas in parallel.
+# Run fchown(2) in a loop is the fastest way to produce dirty quotas
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+
+begin=2000
+end=10000
+nr_proc=$((16 * LOAD_FACTOR))
+deadline=$((100 * TIME_FACTOR))
+
+_workout()
+{
+    for ((i=0; i < nr_proc; i++))
+    do
+	# Spread files to isolated dirs to minimize locking contention
+	mkdir -p $SCRATCH_MNT/chowner/$i
+	$here/src/chowner $SCRATCH_MNT/chowner/$i/test -b $begin -e $end \
+			  -t $((deadline + 10)) &
+	pids="$pids $!"
+    done
+    # Let chowners warm up ...
+    sleep 5
+    start=$(date +%s)
+    for ((i=0;i<3;i++))
+    do
+	s=$(date +%s)
+	# In normal situation command should finish in ~1sec,
+	# but in case of livelock it will spin until chowners exits
+	$*
+	e=$(date +%s)
+	echo "loop $i: $* runtime: $((e-s))" >> $seqres.full
+	sleep 2
+    done
+    end=$(date +%s)
+    runtime=$((end-start))
+    echo "DONE: $* total runtime: $runtime"  >> $seqres.full
+    kill -TERM $pids 2> /dev/null
+    wait $pids
+
+    [ $runtime -le $deadline ] || \
+	_fail "Live lock detected, $* runtime: $runtime, deadline: $deadline"
+}
+
+# real QA test starts here
+_supported_fs generic
+_supported_os Linux
+_require_quota
+#_require_user
+_require_scratch
+_require_command "$KILLALL_PROG" killall
+
+rm -f $seqres.full
+_scratch_mkfs_sized $((512 * 1024 * 1024)) >> $seqres.full 2>&1
+_scratch_mount "-o quota,user"
+chmod 777 $SCRATCH_MNT
+quotacheck -u $SCRATCH_MNT 2>/dev/null
+quotaon -v -u $SCRATCH_MNT >> $seqres.full 2>&1
+
+# Preparation step: Create all files with uid in range
+# to cache quota in kernel memory
+mkdir -p $SCRATCH_MNT/q
+$here/src/chowner $SCRATCH_MNT/q -b $begin -e $end -P
+
+_workout quotasync $SCRATCH_MNT
+_workout sync
+
+echo "Silence is golden"
+# success, all done
+status=0
+exit
diff --git a/tests/generic/585.out b/tests/generic/585.out
new file mode 100644
index 0000000..e4dd43b
--- /dev/null
+++ b/tests/generic/585.out
@@ -0,0 +1,2 @@
+QA output created by 585
+Silence is golden
diff --git a/tests/generic/group b/tests/generic/group
index 42ca2b9..703a1b4 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -587,3 +587,4 @@
 582 auto quick encrypt
 583 auto quick encrypt
 584 auto quick encrypt
+585 auto quota rw stress
-- 
2.7.4


             reply	other threads:[~2019-10-31 10:36 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-31 10:36 Dmitry Monakhov [this message]
2019-10-31 10:36 ` [PATCH 2/2] add generic/586 quota stress test Dmitry Monakhov
2019-11-10 16:33 ` [PATCH 1/2] add generic/585 Eryu Guan
2019-11-11  7:20   ` Dmitry Monakhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191031103639.3786-1-dmonakhov@openvz.org \
    --to=dmonakhov@openvz.org \
    --cc=dmtrmonakhov@yandex-team.ru \
    --cc=fstests@vger.kernel.org \
    --cc=jack@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.