All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chuhong Yuan <hslester96@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Mark Brown <broonie@kernel.org>,
	Palmer Dabbelt <palmer@sifive.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	linux-spi@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org, Chuhong Yuan <hslester96@gmail.com>
Subject: [PATCH] spi: sifive: disable clk when probe fails and remove
Date: Fri,  1 Nov 2019 20:17:45 +0800	[thread overview]
Message-ID: <20191101121745.13413-1-hslester96@gmail.com> (raw)

The driver forgets to disable and unprepare clk when probe fails and
remove.
Add the calls to fix the problem.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
---
 drivers/spi/spi-sifive.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index 35254bdc42c4..f7c1e20432e0 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -357,14 +357,14 @@ static int sifive_spi_probe(struct platform_device *pdev)
 	if (!cs_bits) {
 		dev_err(&pdev->dev, "Could not auto probe CS lines\n");
 		ret = -EINVAL;
-		goto put_master;
+		goto disable_clk;
 	}
 
 	num_cs = ilog2(cs_bits) + 1;
 	if (num_cs > SIFIVE_SPI_MAX_CS) {
 		dev_err(&pdev->dev, "Invalid number of spi slaves\n");
 		ret = -EINVAL;
-		goto put_master;
+		goto disable_clk;
 	}
 
 	/* Define our master */
@@ -393,7 +393,7 @@ static int sifive_spi_probe(struct platform_device *pdev)
 			       dev_name(&pdev->dev), spi);
 	if (ret) {
 		dev_err(&pdev->dev, "Unable to bind to interrupt\n");
-		goto put_master;
+		goto disable_clk;
 	}
 
 	dev_info(&pdev->dev, "mapped; irq=%d, cs=%d\n",
@@ -402,11 +402,13 @@ static int sifive_spi_probe(struct platform_device *pdev)
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "spi_register_master failed\n");
-		goto put_master;
+		goto disable_clk;
 	}
 
 	return 0;
 
+disable_clk:
+	clk_disable_unprepare(spi->clk);
 put_master:
 	spi_master_put(master);
 
@@ -420,6 +422,7 @@ static int sifive_spi_remove(struct platform_device *pdev)
 
 	/* Disable all the interrupts just in case */
 	sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
+	clk_disable_unprepare(spi->clk);
 
 	return 0;
 }
-- 
2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: Chuhong Yuan <hslester96@gmail.com>
Cc: Palmer Dabbelt <palmer@sifive.com>,
	Chuhong Yuan <hslester96@gmail.com>,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	Mark Brown <broonie@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	linux-riscv@lists.infradead.org
Subject: [PATCH] spi: sifive: disable clk when probe fails and remove
Date: Fri,  1 Nov 2019 20:17:45 +0800	[thread overview]
Message-ID: <20191101121745.13413-1-hslester96@gmail.com> (raw)

The driver forgets to disable and unprepare clk when probe fails and
remove.
Add the calls to fix the problem.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
---
 drivers/spi/spi-sifive.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-sifive.c b/drivers/spi/spi-sifive.c
index 35254bdc42c4..f7c1e20432e0 100644
--- a/drivers/spi/spi-sifive.c
+++ b/drivers/spi/spi-sifive.c
@@ -357,14 +357,14 @@ static int sifive_spi_probe(struct platform_device *pdev)
 	if (!cs_bits) {
 		dev_err(&pdev->dev, "Could not auto probe CS lines\n");
 		ret = -EINVAL;
-		goto put_master;
+		goto disable_clk;
 	}
 
 	num_cs = ilog2(cs_bits) + 1;
 	if (num_cs > SIFIVE_SPI_MAX_CS) {
 		dev_err(&pdev->dev, "Invalid number of spi slaves\n");
 		ret = -EINVAL;
-		goto put_master;
+		goto disable_clk;
 	}
 
 	/* Define our master */
@@ -393,7 +393,7 @@ static int sifive_spi_probe(struct platform_device *pdev)
 			       dev_name(&pdev->dev), spi);
 	if (ret) {
 		dev_err(&pdev->dev, "Unable to bind to interrupt\n");
-		goto put_master;
+		goto disable_clk;
 	}
 
 	dev_info(&pdev->dev, "mapped; irq=%d, cs=%d\n",
@@ -402,11 +402,13 @@ static int sifive_spi_probe(struct platform_device *pdev)
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "spi_register_master failed\n");
-		goto put_master;
+		goto disable_clk;
 	}
 
 	return 0;
 
+disable_clk:
+	clk_disable_unprepare(spi->clk);
 put_master:
 	spi_master_put(master);
 
@@ -420,6 +422,7 @@ static int sifive_spi_remove(struct platform_device *pdev)
 
 	/* Disable all the interrupts just in case */
 	sifive_spi_write(spi, SIFIVE_SPI_REG_IE, 0);
+	clk_disable_unprepare(spi->clk);
 
 	return 0;
 }
-- 
2.23.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2019-11-01 12:18 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-01 12:17 Chuhong Yuan [this message]
2019-11-01 12:17 ` [PATCH] spi: sifive: disable clk when probe fails and remove Chuhong Yuan
2019-11-01 23:07 ` Palmer Dabbelt
2019-11-01 23:07   ` Palmer Dabbelt
2019-11-01 23:07   ` Palmer Dabbelt
2019-11-04 12:47   ` Mark Brown
2019-11-04 12:47     ` Mark Brown
2019-11-04 13:27 ` Applied "spi: sifive: disable clk when probe fails and remove" to the spi tree Mark Brown
2019-11-04 13:27   ` Mark Brown
2019-11-04 13:27   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191101121745.13413-1-hslester96@gmail.com \
    --to=hslester96@gmail.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=palmer@sifive.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.