All of lore.kernel.org
 help / color / mirror / Atom feed
From: Curtis Malainey <cujomalainey@chromium.org>
To: alsa-devel@alsa-project.org
Cc: Oder Chiou <oder_chiou@realtek.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
	Cezary Rojewski <cezary.rojewski@intel.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Alexios Zavras <alexios.zavras@intel.com>,
	Takashi Iwai <tiwai@suse.com>,
	Jie Yang <yang.jie@linux.intel.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Ben Zhang <benzh@chromium.org>, Mark Brown <broonie@kernel.org>,
	Bard Liao <bardliao@realtek.com>,
	Curtis Malainey <cujomalainey@chromium.org>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [alsa-devel] [PATCH v3 10/11] ASoC: rt5677: Set ADC clock to use PLL and enable ASRC
Date: Tue,  5 Nov 2019 17:13:35 -0800	[thread overview]
Message-ID: <20191106011335.223061-11-cujomalainey@chromium.org> (raw)
In-Reply-To: <20191106011335.223061-1-cujomalainey@chromium.org>

Use the PLL to kept the correct 24M clock rate so frequency shift does
not occur when using the DSP VAD.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
---
 sound/soc/codecs/rt5677.c           |  6 ++++++
 sound/soc/codecs/rt5677.h           |  2 ++
 sound/soc/intel/boards/bdw-rt5677.c | 33 +++++++++++++++++++++++++++++
 3 files changed, 41 insertions(+)

diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index a65d1554366d..0e7773584145 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -5046,6 +5046,11 @@ static const struct snd_soc_dai_ops rt5677_aif_dai_ops = {
 	.set_tdm_slot = rt5677_set_tdm_slot,
 };
 
+static const struct snd_soc_dai_ops rt5677_dsp_dai_ops = {
+	.set_sysclk = rt5677_set_dai_sysclk,
+	.set_pll = rt5677_set_dai_pll,
+};
+
 static struct snd_soc_dai_driver rt5677_dai[] = {
 	{
 		.name = "rt5677-aif1",
@@ -5152,6 +5157,7 @@ static struct snd_soc_dai_driver rt5677_dai[] = {
 			.rates = SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
 		},
+		.ops = &rt5677_dsp_dai_ops,
 	},
 };
 
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h
index f8ada967fdbc..944ae02aafc2 100644
--- a/sound/soc/codecs/rt5677.h
+++ b/sound/soc/codecs/rt5677.h
@@ -1336,6 +1336,8 @@
 #define RT5677_PLL_M_SFT			12
 #define RT5677_PLL_M_BP				(0x1 << 11)
 #define RT5677_PLL_M_BP_SFT			11
+#define RT5677_PLL_UPDATE_PLL1			(0x1 << 1)
+#define RT5677_PLL_UPDATE_PLL1_SFT		1
 
 /* Global Clock Control 1 (0x80) */
 #define RT5677_SCLK_SRC_MASK			(0x3 << 14)
diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c
index b2475e3eff7b..2af8e5a62da8 100644
--- a/sound/soc/intel/boards/bdw-rt5677.c
+++ b/sound/soc/intel/boards/bdw-rt5677.c
@@ -170,10 +170,37 @@ static int bdw_rt5677_hw_params(struct snd_pcm_substream *substream,
 	return ret;
 }
 
+static int bdw_rt5677_dsp_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5677_SCLK_S_PLL1, 24576000,
+		SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec sysclk configuration\n");
+		return ret;
+	}
+	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5677_PLL1_S_MCLK,
+		24000000, 24576000);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec pll configuration\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static const struct snd_soc_ops bdw_rt5677_ops = {
 	.hw_params = bdw_rt5677_hw_params,
 };
 
+static const struct snd_soc_ops bdw_rt5677_dsp_ops = {
+	.hw_params = bdw_rt5677_dsp_hw_params,
+};
+
 #if !IS_ENABLED(CONFIG_SND_SOC_SOF_BROADWELL)
 static int bdw_rt5677_rtd_init(struct snd_soc_pcm_runtime *rtd)
 {
@@ -213,6 +240,11 @@ static int bdw_rt5677_init(struct snd_soc_pcm_runtime *rtd)
 	rt5677_sel_asrc_clk_src(component, RT5677_DA_STEREO_FILTER |
 			RT5677_AD_STEREO1_FILTER | RT5677_I2S1_SOURCE,
 			RT5677_CLK_SEL_I2S1_ASRC);
+	/* Enable codec ASRC function for Mono ADC L.
+	 * The ASRC clock source is clk_sys2_asrc.
+	 */
+	rt5677_sel_asrc_clk_src(component, RT5677_AD_MONO_L_FILTER,
+			RT5677_CLK_SEL_SYS2);
 
 	/* Request rt5677 GPIO for headphone amp control */
 	bdw_rt5677->gpio_hp_en = devm_gpiod_get(component->dev, "headphone-enable",
@@ -291,6 +323,7 @@ static struct snd_soc_dai_link bdw_rt5677_dais[] = {
 	{
 		.name = "Codec DSP",
 		.stream_name = "Wake on Voice",
+		.ops = &bdw_rt5677_dsp_ops,
 		SND_SOC_DAILINK_REG(dsp),
 	},
 
-- 
2.24.0.rc1.363.gb1bccd3e3d-goog

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2019-11-06  1:21 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-06  1:13 [alsa-devel] [PATCH v3 00/11] Add Samus Hotwording for RT5677 Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 01/11] ASoC: rt5677: Load firmware via SPI using delayed work Curtis Malainey
2019-11-06  1:17   ` Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 02/11] ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM device Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 03/11] ASoC: rt5677: Enable jack detect while DSP is running Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 04/11] ASoC: rt5677: Add DAPM audio path for hotword stream Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 05/11] ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 06/11] ASoC: rt5677: Stop and restart DSP over suspend/resume Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 07/11] ASoC: rt5677: Disable irq at suspend Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 08/11] ASoC: rt5677: Allow VAD to be shut on/off at all times Curtis Malainey
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 09/11] ASoC: bdw-rt5677: Turn on MCLK1 for DSP via DAPM Curtis Malainey
2019-11-06  1:13 ` Curtis Malainey [this message]
2019-11-06  1:13 ` [alsa-devel] [PATCH v3 11/11] ASoC: rt5677: Wait for DSP to boot before loading firmware Curtis Malainey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191106011335.223061-11-cujomalainey@chromium.org \
    --to=cujomalainey@chromium.org \
    --cc=alexios.zavras@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bardliao@realtek.com \
    --cc=benzh@chromium.org \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=oder_chiou@realtek.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tglx@linutronix.de \
    --cc=tiwai@suse.com \
    --cc=yang.jie@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.