From: Christophe Roullier <christophe.roullier@st.com> To: <robh@kernel.org>, <davem@davemloft.net>, <joabreu@synopsys.com>, <mark.rutland@arm.com>, <mcoquelin.stm32@gmail.com>, <alexandre.torgue@st.com>, <peppe.cavallaro@st.com> Cc: <linux-stm32@st-md-mailman.stormreply.com>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>, <christophe.roullier@st.com>, <andrew@lunn.ch> Subject: [PATCH V4 net-next 3/4] ARM: dts: stm32: adjust slew rate for Ethernet Date: Thu, 7 Nov 2019 09:47:56 +0100 [thread overview] Message-ID: <20191107084757.17910-4-christophe.roullier@st.com> (raw) In-Reply-To: <20191107084757.17910-1-christophe.roullier@st.com> ETH_MDIO slew-rate should be set to "0" instead of "2" Signed-off-by: Christophe Roullier <christophe.roullier@st.com> --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 0a3a7d66737b..9a8f0d4c9ea3 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -217,13 +217,18 @@ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <2>; }; pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Roullier <christophe.roullier@st.com> To: <robh@kernel.org>, <davem@davemloft.net>, <joabreu@synopsys.com>, <mark.rutland@arm.com>, <mcoquelin.stm32@gmail.com>, <alexandre.torgue@st.com>, <peppe.cavallaro@st.com> Cc: devicetree@vger.kernel.org, andrew@lunn.ch, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, christophe.roullier@st.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH V4 net-next 3/4] ARM: dts: stm32: adjust slew rate for Ethernet Date: Thu, 7 Nov 2019 09:47:56 +0100 [thread overview] Message-ID: <20191107084757.17910-4-christophe.roullier@st.com> (raw) In-Reply-To: <20191107084757.17910-1-christophe.roullier@st.com> ETH_MDIO slew-rate should be set to "0" instead of "2" Signed-off-by: Christophe Roullier <christophe.roullier@st.com> --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index 0a3a7d66737b..9a8f0d4c9ea3 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -217,13 +217,18 @@ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ - <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <2>; }; pins2 { + pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-07 8:48 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-07 8:47 [PATCH V4 net-next 0/4] net: ethernet: stmmac: cleanup clock and optimization Christophe Roullier 2019-11-07 8:47 ` Christophe Roullier 2019-11-07 8:47 ` [PATCH V4 net-next 1/4] net: ethernet: stmmac: Add support for syscfg clock Christophe Roullier 2019-11-07 8:47 ` Christophe Roullier 2019-11-07 13:03 ` Andrew Lunn 2019-11-07 13:03 ` Andrew Lunn 2019-11-08 19:21 ` David Miller 2019-11-08 19:21 ` David Miller 2019-11-07 8:47 ` [PATCH V4 net-next 2/4] ARM: dts: stm32: remove syscfg clock on stm32mp157c ethernet Christophe Roullier 2019-11-07 8:47 ` Christophe Roullier 2019-11-07 8:47 ` Christophe Roullier [this message] 2019-11-07 8:47 ` [PATCH V4 net-next 3/4] ARM: dts: stm32: adjust slew rate for Ethernet Christophe Roullier 2019-11-07 8:47 ` [PATCH V4 net-next 4/4] ARM: dts: stm32: Enable gating of the MAC TX clock during TX low-power mode on stm32mp157c Christophe Roullier 2019-11-07 8:47 ` Christophe Roullier 2019-11-07 23:26 ` [PATCH V4 net-next 0/4] net: ethernet: stmmac: cleanup clock and optimization David Miller 2019-11-07 23:26 ` David Miller 2019-11-08 10:35 ` Alexandre Torgue 2019-11-08 10:35 ` Alexandre Torgue 2019-11-08 19:21 ` David Miller 2019-11-08 19:21 ` David Miller 2019-12-09 14:02 ` Alexandre Torgue 2019-12-09 14:02 ` Alexandre Torgue
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191107084757.17910-4-christophe.roullier@st.com \ --to=christophe.roullier@st.com \ --cc=alexandre.torgue@st.com \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=joabreu@synopsys.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mark.rutland@arm.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=peppe.cavallaro@st.com \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.