All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org, Sibi Sankar <sibis@codeaurora.org>,
	Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Subject: [PATCH v2 2/2] remoteproc: qcom_q6v5_mss: Validate each segment during loading
Date: Fri,  8 Nov 2019 16:40:33 -0800	[thread overview]
Message-ID: <20191109004033.1496871-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20191109004033.1496871-1-bjorn.andersson@linaro.org>

The code used to sync with the MBA after each segment loaded and this is
still what's done downstream. So reduce the delta towards downstream by
switching to a model where the content is iteratively validated.

Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Picked up Jeff's r-b and t-b

 drivers/remoteproc/qcom_q6v5_mss.c | 76 ++++++++++++++++++++----------
 1 file changed, 51 insertions(+), 25 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index efab574b2e12..914d5546e1cf 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -358,23 +358,29 @@ static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
 }
 
 static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
-				   bool remote_owner, phys_addr_t addr,
+				   bool local, bool remote, phys_addr_t addr,
 				   size_t size)
 {
-	struct qcom_scm_vmperm next;
+	struct qcom_scm_vmperm next[2];
+	int perms = 0;
 
 	if (!qproc->need_mem_protection)
 		return 0;
-	if (remote_owner && *current_perm == BIT(QCOM_SCM_VMID_MSS_MSA))
-		return 0;
-	if (!remote_owner && *current_perm == BIT(QCOM_SCM_VMID_HLOS))
-		return 0;
 
-	next.vmid = remote_owner ? QCOM_SCM_VMID_MSS_MSA : QCOM_SCM_VMID_HLOS;
-	next.perm = remote_owner ? QCOM_SCM_PERM_RW : QCOM_SCM_PERM_RWX;
+	if (local) {
+		next[perms].vmid = QCOM_SCM_VMID_HLOS;
+		next[perms].perm = QCOM_SCM_PERM_RWX;
+		perms++;
+	}
+
+	if (remote) {
+		next[perms].vmid = QCOM_SCM_VMID_MSS_MSA;
+		next[perms].perm = QCOM_SCM_PERM_RW;
+		perms++;
+	}
 
 	return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K),
-				   current_perm, &next, 1);
+				   current_perm, next, perms);
 }
 
 static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
@@ -681,7 +687,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 
 	/* Hypervisor mapping to access metadata by modem */
 	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
-	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, phys, size);
+	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true, phys, size);
 	if (ret) {
 		dev_err(qproc->dev,
 			"assigning Q6 access to metadata failed: %d\n", ret);
@@ -699,7 +705,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 		dev_err(qproc->dev, "MPSS header authentication failed: %d\n", ret);
 
 	/* Metadata authentication done, remove modem access */
-	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, phys, size);
+	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, false, phys, size);
 	if (xferop_ret)
 		dev_warn(qproc->dev,
 			 "mdt buffer not reclaimed system may become unstable\n");
@@ -786,7 +792,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	}
 
 	/* Assign MBA image access in DDR to q6 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false, true,
 				      qproc->mba_phys, qproc->mba_size);
 	if (ret) {
 		dev_err(qproc->dev,
@@ -820,8 +826,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
 
 reclaim_mba:
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
-						qproc->mba_phys,
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+						false, qproc->mba_phys,
 						qproc->mba_size);
 	if (xfermemop_ret) {
 		dev_err(qproc->dev,
@@ -888,7 +894,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 	/* In case of failure or coredump scenario where reclaiming MBA memory
 	 * could not happen reclaim it here.
 	 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false,
 				      qproc->mba_phys,
 				      qproc->mba_size);
 	WARN_ON(ret);
@@ -915,6 +921,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	phys_addr_t boot_addr;
 	phys_addr_t min_addr = PHYS_ADDR_MAX;
 	phys_addr_t max_addr = 0;
+	u32 code_length;
 	bool relocate = false;
 	char *fw_name;
 	size_t fw_name_len;
@@ -965,9 +972,19 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	}
 
 	/* Try to reset ownership back to Linux */
-	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
+	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
 				qproc->mpss_phys, qproc->mpss_size);
 
+	/* Share ownership between Linux and MSS, during segment loading */
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, true,
+				      qproc->mpss_phys, qproc->mpss_size);
+	if (ret) {
+		dev_err(qproc->dev,
+			"assigning Q6 access to mpss memory failed: %d\n", ret);
+		ret = -EAGAIN;
+		goto release_firmware;
+	}
+
 	mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
 	qproc->mpss_reloc = mpss_reloc;
 	/* Load firmware segments */
@@ -1016,10 +1033,24 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 			       phdr->p_memsz - phdr->p_filesz);
 		}
 		size += phdr->p_memsz;
+
+		code_length = readl(qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
+		if (!code_length) {
+			boot_addr = relocate ? qproc->mpss_phys : min_addr;
+			writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
+			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
+		}
+		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
+
+		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
+		if (ret < 0) {
+			dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret);
+			goto release_firmware;
+		}
 	}
 
 	/* Transfer ownership of modem ddr region to q6 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
 				      qproc->mpss_phys, qproc->mpss_size);
 	if (ret) {
 		dev_err(qproc->dev,
@@ -1028,11 +1059,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 		goto release_firmware;
 	}
 
-	boot_addr = relocate ? qproc->mpss_phys : min_addr;
-	writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
-	writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
-	writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
-
 	ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
 	if (ret == -ETIMEDOUT)
 		dev_err(qproc->dev, "MPSS authentication timed out\n");
@@ -1061,7 +1087,7 @@ static void qcom_q6v5_dump_segment(struct rproc *rproc,
 		ret = q6v5_mba_load(qproc);
 
 		/* Try to reset ownership back to Linux */
-		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
+		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
 					qproc->mpss_phys, qproc->mpss_size);
 	}
 
@@ -1101,8 +1127,8 @@ static int q6v5_start(struct rproc *rproc)
 		goto reclaim_mpss;
 	}
 
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
-						qproc->mba_phys,
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+						false, qproc->mba_phys,
 						qproc->mba_size);
 	if (xfermemop_ret)
 		dev_err(qproc->dev,
-- 
2.23.0

  parent reply	other threads:[~2019-11-09  0:40 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-09  0:40 [PATCH v2 0/2] remoteproc: mss: Improve mem_assign and firmware load Bjorn Andersson
2019-11-09  0:40 ` [PATCH v2 1/2] remoteproc: qcom_q6v5_mss: Don't reassign mpss region on shutdown Bjorn Andersson
2019-11-12 17:01   ` Jeffrey Hugo
2019-11-13 18:02     ` Jeffrey Hugo
2019-11-09  0:40 ` Bjorn Andersson [this message]
2019-11-10 14:05   ` [PATCH v2 2/2] remoteproc: qcom_q6v5_mss: Validate each segment during loading Luca Weiss
2019-11-11  6:45     ` Bjorn Andersson
2019-11-11  6:45       ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191109004033.1496871-3-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=akdwived@codeaurora.org \
    --cc=jeffrey.l.hugo@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.