All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Geoffrey D. Bennett" <g@b4.vu>
To: alsa-devel@alsa-project.org
Subject: [alsa-devel] [PATCH RFC] ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data
Date: Mon, 11 Nov 2019 00:13:56 +1030	[thread overview]
Message-ID: <20191110134356.GA31589@b4.vu> (raw)

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type
entries in the wrong place. Use designators to explicitly specify the
array elements being set.

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Reported-by: (TBA, have asked for permission)
Tested-by: Alex Fellows <alex.fellows@gmail.com>
Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")

---
 sound/usb/mixer_scarlett_gen2.c | 36 ++++++++++++++++-----------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 7d460b1f1735..94b903d95afa 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -261,34 +261,34 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 8 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 4, 4, 4, 4, 4 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 6, 6, 6, 6, 6 },
 			.src_descr = "PCM %d",
@@ -317,44 +317,44 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 4 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 6, 6, 6, 6 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
+			.id = 0x180,
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
 			 */
-			.id = 0x180,
 			.num = { 2, 2, 2, 2, 2 },
 			.src_descr = "S/PDIF %d",
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 0, 0, 0, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
 			.src_descr = "PCM %d",
@@ -387,20 +387,20 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 	},
 
 	.ports = {
-		{
+		[SCARLETT2_PORT_TYPE_NONE] = {
 			.id = 0x000,
 			.num = { 1, 0, 8, 8, 6 },
 			.src_descr = "Off",
 			.src_num_offset = 0,
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {
 			.id = 0x080,
 			.num = { 8, 10, 10, 10, 10 },
 			.src_descr = "Analogue %d",
 			.src_num_offset = 1,
 			.dst_descr = "Analogue Output %02d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_SPDIF] = {
 			/* S/PDIF outputs aren't available at 192KHz
 			 * but are included in the USB mux I/O
 			 * assignment message anyway
@@ -411,21 +411,21 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
 			.src_num_offset = 1,
 			.dst_descr = "S/PDIF Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_ADAT] = {
 			.id = 0x200,
 			.num = { 8, 8, 8, 4, 0 },
 			.src_descr = "ADAT %d",
 			.src_num_offset = 1,
 			.dst_descr = "ADAT Output %d Playback"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_MIX] = {
 			.id = 0x300,
 			.num = { 10, 18, 18, 18, 18 },
 			.src_descr = "Mix %c",
 			.src_num_offset = 65,
 			.dst_descr = "Mixer Input %02d Capture"
 		},
-		{
+		[SCARLETT2_PORT_TYPE_PCM] = {
 			.id = 0x600,
 			.num = { 20, 18, 18, 14, 10 },
 			.src_descr = "PCM %d",
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

                 reply	other threads:[~2019-11-10 13:45 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191110134356.GA31589@b4.vu \
    --to=g@b4.vu \
    --cc=alsa-devel@alsa-project.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.