All of lore.kernel.org
 help / color / mirror / Atom feed
From: amirmizi6@gmail.com
To: Eyal.Cohen@nuvoton.com, jarkko.sakkinen@linux.intel.com,
	oshrialkoby85@gmail.com, alexander.steffen@infineon.com,
	robh+dt@kernel.org, mark.rutland@arm.com, peterhuewe@gmx.de,
	jgg@ziepe.ca, arnd@arndb.de, gregkh@linuxfoundation.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-integrity@vger.kernel.org, oshri.alkoby@nuvoton.com,
	tmaimon77@gmail.com, gcwilson@us.ibm.com, kgoldman@us.ibm.com,
	ayna@linux.vnet.ibm.com, Dan.Morav@nuvoton.com,
	oren.tanami@nuvoton.com, shmulik.hagar@nuvoton.com,
	amir.mizinski@nuvoton.com, Amir Mizinski <amirmizi6@gmail.com>
Subject: [PATCH v1 2/5] char: tpm: Add check_data handle to tpm_tis_phy_ops in order to check data integrity
Date: Sun, 10 Nov 2019 18:21:34 +0200	[thread overview]
Message-ID: <20191110162137.230913-3-amirmizi6@gmail.com> (raw)
In-Reply-To: <20191110162137.230913-1-amirmizi6@gmail.com>

From: Amir Mizinski <amirmizi6@gmail.com>

The current principles:
- When sending command:
1. Host writes TPM_STS.commandReady
2. Host writes command
3. Host checks TPM received data correctly
4. if not go to step 1

- When receiving data:
1. Host check TPM_STS.dataAvail is set
2. Host get data
3. Host check received data are correct.
4. if not Host write TPM_STS.responseRetry and go to step 1.

this commit is based on previous work by Christophe Richard

Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
---
 drivers/char/tpm/tpm_tis_core.c | 97 +++++++++++++++++++++++++----------------
 drivers/char/tpm/tpm_tis_core.h |  3 ++
 2 files changed, 62 insertions(+), 38 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index c3181ea..ce7f8a1 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -242,6 +242,15 @@ static u8 tpm_tis_status(struct tpm_chip *chip)
 	return status;
 }
 
+static bool tpm_tis_check_data(struct tpm_chip *chip, const u8 *buf, size_t len)
+{
+	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
+
+	if (priv->phy_ops->check_data)
+		return priv->phy_ops->check_data(priv, buf, len);
+	return true;
+}
+
 static void tpm_tis_ready(struct tpm_chip *chip)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
@@ -308,47 +317,55 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
 	int size = 0;
-	int status;
+	int status, i;
 	u32 expected;
+	bool check_data = false;
 
-	if (count < TPM_HEADER_SIZE) {
-		size = -EIO;
-		goto out;
-	}
+	for (i = 0; i < TPM_RETRY && !check_data; i++) {
+		if (count < TPM_HEADER_SIZE) {
+			size = -EIO;
+			goto out;
+		}
 
-	size = recv_data(chip, buf, TPM_HEADER_SIZE);
-	/* read first 10 bytes, including tag, paramsize, and result */
-	if (size < TPM_HEADER_SIZE) {
-		dev_err(&chip->dev, "Unable to read header\n");
-		goto out;
-	}
+		size = recv_data(chip, buf, TPM_HEADER_SIZE);
+		/* read first 10 bytes, including tag, paramsize, and result */
+		if (size < TPM_HEADER_SIZE) {
+			dev_err(&chip->dev, "Unable to read header\n");
+			goto out;
+		}
 
-	expected = be32_to_cpu(*(__be32 *) (buf + 2));
-	if (expected > count || expected < TPM_HEADER_SIZE) {
-		size = -EIO;
-		goto out;
-	}
+		expected = be32_to_cpu(*(__be32 *) (buf + 2));
+		if (expected > count || expected < TPM_HEADER_SIZE) {
+			size = -EIO;
+			goto out;
+		}
 
-	size += recv_data(chip, &buf[TPM_HEADER_SIZE],
-			  expected - TPM_HEADER_SIZE);
-	if (size < expected) {
-		dev_err(&chip->dev, "Unable to read remainder of result\n");
-		size = -ETIME;
-		goto out;
-	}
+		size += recv_data(chip, &buf[TPM_HEADER_SIZE],
+				  expected - TPM_HEADER_SIZE);
+		if (size < expected) {
+			dev_err(&chip->dev, "Unable to read remainder of result\n");
+			size = -ETIME;
+			goto out;
+		}
 
-	if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
-				&priv->int_queue, false) < 0) {
-		size = -ETIME;
-		goto out;
-	}
-	status = tpm_tis_status(chip);
-	if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
-		dev_err(&chip->dev, "Error left over data\n");
-		size = -EIO;
-		goto out;
-	}
+		if (wait_for_tpm_stat(chip, TPM_STS_VALID, chip->timeout_c,
+				      &priv->int_queue, false) < 0) {
+			size = -ETIME;
+			goto out;
+		}
+
+		status = tpm_tis_status(chip);
+		if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
+			dev_err(&chip->dev, "Error left over data\n");
+			size = -EIO;
+			goto out;
+		}
 
+		check_data = tpm_tis_check_data(chip, buf, size);
+		if (!check_data)
+			tpm_tis_write8(priv, TPM_STS(priv->locality),
+				       TPM_STS_RESPONSE_RETRY);
+	}
 out:
 	tpm_tis_ready(chip);
 	return size;
@@ -453,13 +470,17 @@ static void disable_interrupts(struct tpm_chip *chip)
 static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
 {
 	struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
-	int rc;
+	int rc, i;
 	u32 ordinal;
 	unsigned long dur;
+	bool data_valid = false;
 
-	rc = tpm_tis_send_data(chip, buf, len);
-	if (rc < 0)
-		return rc;
+	for (i = 0; i < TPM_RETRY && !data_valid; i++) {
+		rc = tpm_tis_send_data(chip, buf, len);
+		if (rc < 0)
+			return rc;
+		data_valid = tpm_tis_check_data(chip, buf, len);
+	}
 
 	/* go and do it */
 	rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index d06c65b..486c2e9 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -34,6 +34,7 @@ enum tis_status {
 	TPM_STS_GO = 0x20,
 	TPM_STS_DATA_AVAIL = 0x10,
 	TPM_STS_DATA_EXPECT = 0x08,
+	TPM_STS_RESPONSE_RETRY = 0x02,
 };
 
 enum tis_int_flags {
@@ -106,6 +107,8 @@ struct tpm_tis_phy_ops {
 	int (*read16)(struct tpm_tis_data *data, u32 addr, u16 *result);
 	int (*read32)(struct tpm_tis_data *data, u32 addr, u32 *result);
 	int (*write32)(struct tpm_tis_data *data, u32 addr, u32 src);
+	bool (*check_data)(struct tpm_tis_data *data, const u8 *buf,
+			   size_t len);
 };
 
 static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,
-- 
2.7.4


  parent reply	other threads:[~2019-11-10 16:33 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-10 16:21 [PATCH v1 0/5] add tpm i2c ptp driver amirmizi6
2019-11-10 16:21 ` [PATCH v1 1/5] char: tpm: Make implementation of read16 read32 write32 optional amirmizi6
2019-11-10 16:21 ` amirmizi6 [this message]
2019-11-12 20:22   ` [PATCH v1 2/5] char: tpm: Add check_data handle to tpm_tis_phy_ops in order to check data integrity Jarkko Sakkinen
2019-11-10 16:21 ` [PATCH v1 3/5] char: tpm: rewrite "tpm_tis_req_canceled()" amirmizi6
2019-11-10 18:00   ` Jerry Snitselaar
2019-11-12  1:25     ` Stefan Berger
2019-11-10 16:21 ` [PATCH v1 4/5] dt-bindings: tpm: Add the TPM TIS I2C device tree binding documentaion amirmizi6
2019-11-14 19:10   ` Rob Herring
2019-11-24 18:02     ` Amir Mizinski
2019-11-10 16:21 ` [PATCH v1 5/5] char: tpm: add tpm_tis_i2c driver amirmizi6
2019-12-02 13:01 [PATCH v1 0/5] add tpm i2c ptp driver amirmizi6
2019-12-02 13:01 ` [PATCH v1 2/5] char: tpm: Add check_data handle to tpm_tis_phy_ops in order to check data integrity amirmizi6

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191110162137.230913-3-amirmizi6@gmail.com \
    --to=amirmizi6@gmail.com \
    --cc=Dan.Morav@nuvoton.com \
    --cc=Eyal.Cohen@nuvoton.com \
    --cc=alexander.steffen@infineon.com \
    --cc=amir.mizinski@nuvoton.com \
    --cc=arnd@arndb.de \
    --cc=ayna@linux.vnet.ibm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gcwilson@us.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jgg@ziepe.ca \
    --cc=kgoldman@us.ibm.com \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=oren.tanami@nuvoton.com \
    --cc=oshri.alkoby@nuvoton.com \
    --cc=oshrialkoby85@gmail.com \
    --cc=peterhuewe@gmx.de \
    --cc=robh+dt@kernel.org \
    --cc=shmulik.hagar@nuvoton.com \
    --cc=tmaimon77@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.