From: Michael Walle <michael@walle.cc> To: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Cc: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>, patches@opensource.cirrus.com, Michael Walle <michael@walle.cc> Subject: [PATCH] ASoC: wm8904: fix regcache handling Date: Tue, 12 Nov 2019 23:36:29 +0100 [thread overview] Message-ID: <20191112223629.21867-1-michael@walle.cc> (raw) The current code assumes that the power is turned off in SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't turned off and the registers are not reset to their default values but the regcache is still marked as dirty. Thus a value might not be written to the hardware if it is set to the default value. Do a software reset before turning off the power to make sure the registers are always reset to their default states. Signed-off-by: Michael Walle <michael@walle.cc> --- sound/soc/codecs/wm8904.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 2a7d23a5daa8..7d7ea15d73e0 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1933,6 +1933,7 @@ static int wm8904_set_bias_level(struct snd_soc_component *component, snd_soc_component_update_bits(component, WM8904_BIAS_CONTROL_0, WM8904_BIAS_ENA, 0); + snd_soc_component_write(component, WM8904_SW_RESET_AND_ID, 0); regcache_cache_only(wm8904->regmap, true); regcache_mark_dirty(wm8904->regmap); -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc> To: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Cc: patches@opensource.cirrus.com, Takashi Iwai <tiwai@suse.com>, Liam Girdwood <lgirdwood@gmail.com>, Michael Walle <michael@walle.cc>, Mark Brown <broonie@kernel.org> Subject: [alsa-devel] [PATCH] ASoC: wm8904: fix regcache handling Date: Tue, 12 Nov 2019 23:36:29 +0100 [thread overview] Message-ID: <20191112223629.21867-1-michael@walle.cc> (raw) The current code assumes that the power is turned off in SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't turned off and the registers are not reset to their default values but the regcache is still marked as dirty. Thus a value might not be written to the hardware if it is set to the default value. Do a software reset before turning off the power to make sure the registers are always reset to their default states. Signed-off-by: Michael Walle <michael@walle.cc> --- sound/soc/codecs/wm8904.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 2a7d23a5daa8..7d7ea15d73e0 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1933,6 +1933,7 @@ static int wm8904_set_bias_level(struct snd_soc_component *component, snd_soc_component_update_bits(component, WM8904_BIAS_CONTROL_0, WM8904_BIAS_ENA, 0); + snd_soc_component_write(component, WM8904_SW_RESET_AND_ID, 0); regcache_cache_only(wm8904->regmap, true); regcache_mark_dirty(wm8904->regmap); -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-11-12 22:36 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-12 22:36 Michael Walle [this message] 2019-11-12 22:36 ` [alsa-devel] [PATCH] ASoC: wm8904: fix regcache handling Michael Walle 2019-11-13 8:25 ` Charles Keepax 2019-11-13 8:25 ` [alsa-devel] " Charles Keepax 2019-11-15 12:25 ` Applied "ASoC: wm8904: fix regcache handling" to the asoc tree Mark Brown 2019-11-15 12:25 ` [alsa-devel] " Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191112223629.21867-1-michael@walle.cc \ --to=michael@walle.cc \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=patches@opensource.cirrus.com \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.