All of lore.kernel.org
 help / color / mirror / Atom feed
From: Przemyslaw Gaj <pgaj@cadence.com>
To: <bbrezillon@kernel.org>
Cc: linux-i3c@lists.infradead.org, agolec@cadence.com,
	Przemyslaw Gaj <pgaj@cadence.com>,
	rafalc@cadence.com, vitor.soares@synopsys.com
Subject: [PATCH v3] i3c: master: cdns: add data hold delay support
Date: Mon, 18 Nov 2019 16:01:14 +0100	[thread overview]
Message-ID: <20191118150115.13839-1-pgaj@cadence.com> (raw)

This patch adds support for THD_DEL (Data Hold Delay) to Cadence
I3C master constoller driver.

As per MIPI I3C Specification 1.0, Table 75 (page 142) defines
non-zero minimal tHD_PP timing on master output (Fig 65). This
setting allows to meet this timing on master's soc outputs,
regardless of PCB balancing.

Signed-off-by: Przemyslaw Gaj <pgaj@cadence.com>

---

Main changes between v2 and v3:
- Add thd_delay_ns value and calculate register value depending on that

Main changes between v1 and v2:
- Add device-specific data which holds the thd_del value
- Remove device tree property
---
 drivers/i3c/master/i3c-master-cdns.c | 49 ++++++++++++++++++++++++++++++++----
 1 file changed, 44 insertions(+), 5 deletions(-)

diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c
index 10db0bf0655a..81756b60a1a9 100644
--- a/drivers/i3c/master/i3c-master-cdns.c
+++ b/drivers/i3c/master/i3c-master-cdns.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
+#include <linux/of_device.h>
 
 #define DEV_ID				0x0
 #define DEV_ID_I3C_MASTER		0x5034
@@ -60,6 +61,7 @@
 #define CTRL_HALT_EN			BIT(30)
 #define CTRL_MCS			BIT(29)
 #define CTRL_MCS_EN			BIT(28)
+#define CTRL_THD_DELAY(x)		(((x) << 24) & GENMASK(25, 24))
 #define CTRL_HJ_DISEC			BIT(8)
 #define CTRL_MST_ACK			BIT(7)
 #define CTRL_HJ_ACK			BIT(6)
@@ -70,6 +72,7 @@
 #define CTRL_MIXED_FAST_BUS_MODE	2
 #define CTRL_MIXED_SLOW_BUS_MODE	3
 #define CTRL_BUS_MODE_MASK		GENMASK(1, 0)
+#define THD_DELAY_MAX			3
 
 #define PRESCL_CTRL0			0x14
 #define PRESCL_CTRL0_I2C(x)		((x) << 16)
@@ -388,6 +391,10 @@ struct cdns_i3c_xfer {
 	struct cdns_i3c_cmd cmds[0];
 };
 
+struct cdns_i3c_data {
+	u8 thd_delay_ns;
+};
+
 struct cdns_i3c_master {
 	struct work_struct hj_work;
 	struct i3c_master_controller base;
@@ -408,6 +415,7 @@ struct cdns_i3c_master {
 	struct clk *pclk;
 	struct cdns_i3c_master_caps caps;
 	unsigned long i3c_scl_lim;
+	const struct cdns_i3c_data *devdata;
 };
 
 static inline struct cdns_i3c_master *
@@ -1181,6 +1189,20 @@ static int cdns_i3c_master_do_daa(struct i3c_master_controller *m)
 	return 0;
 }
 
+static u8 cdns_i3c_master_calculate_thd_delay(struct cdns_i3c_master *master)
+{
+	unsigned long sysclk_rate = clk_get_rate(master->sysclk);
+	u8 thd_delay = DIV_ROUND_UP(master->devdata->thd_delay_ns,
+				    (1000000000 / sysclk_rate));
+
+	/* Every value greater than 3 is not valid. */
+	if (thd_delay > THD_DELAY_MAX)
+		thd_delay = THD_DELAY_MAX;
+
+	/* CTLR_THD_DEL value is encoded. */
+	return (THD_DELAY_MAX - thd_delay);
+}
+
 static int cdns_i3c_master_bus_init(struct i3c_master_controller *m)
 {
 	struct cdns_i3c_master *master = to_cdns_i3c_master(m);
@@ -1264,6 +1286,15 @@ static int cdns_i3c_master_bus_init(struct i3c_master_controller *m)
 	 * We will issue ENTDAA afterwards from the threaded IRQ handler.
 	 */
 	ctrl |= CTRL_HJ_ACK | CTRL_HJ_DISEC | CTRL_HALT_EN | CTRL_MCS_EN;
+
+	/*
+	 * Configure data hold delay based on device-specific data.
+	 *
+	 * MIPI I3C Specification 1.0 defines non-zero minimal tHD_PP timing on
+	 * master output. This setting allows to meet this timing on master's
+	 * SoC outputs, regardless of PCB balancing.
+	 */
+	ctrl |= CTRL_THD_DELAY(cdns_i3c_master_calculate_thd_delay(master));
 	writel(ctrl, master->regs + CTRL);
 
 	cdns_i3c_master_enable(master);
@@ -1521,6 +1552,15 @@ static void cdns_i3c_master_hj(struct work_struct *work)
 	i3c_master_do_daa(&master->base);
 }
 
+static struct cdns_i3c_data cdns_i3c_devdata = {
+	.thd_delay_ns = 10,
+};
+
+static const struct of_device_id cdns_i3c_master_of_ids[] = {
+	{ .compatible = "cdns,i3c-master", .data = &cdns_i3c_devdata },
+	{ /* sentinel */ },
+};
+
 static int cdns_i3c_master_probe(struct platform_device *pdev)
 {
 	struct cdns_i3c_master *master;
@@ -1532,6 +1572,10 @@ static int cdns_i3c_master_probe(struct platform_device *pdev)
 	if (!master)
 		return -ENOMEM;
 
+	master->devdata = of_device_get_match_data(&pdev->dev);
+	if (!master->devdata)
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	master->regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(master->regs))
@@ -1631,11 +1675,6 @@ static int cdns_i3c_master_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id cdns_i3c_master_of_ids[] = {
-	{ .compatible = "cdns,i3c-master" },
-	{ /* sentinel */ },
-};
-
 static struct platform_driver cdns_i3c_master = {
 	.probe = cdns_i3c_master_probe,
 	.remove = cdns_i3c_master_remove,
-- 
2.14.0


_______________________________________________
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

             reply	other threads:[~2019-11-18 15:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-18 15:01 Przemyslaw Gaj [this message]
2019-11-20 14:53 ` [PATCH v3] i3c: master: cdns: add data hold delay support Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191118150115.13839-1-pgaj@cadence.com \
    --to=pgaj@cadence.com \
    --cc=agolec@cadence.com \
    --cc=bbrezillon@kernel.org \
    --cc=linux-i3c@lists.infradead.org \
    --cc=rafalc@cadence.com \
    --cc=vitor.soares@synopsys.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.