All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mohammad Rasim <mohammad.rasim96@gmail.com>
To: linux-bluetooth@vger.kernel.org,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Marcel Holtmann <marcel@holtmann.org>,
	linux-amlogic@lists.infradead.org
Cc: Mohammad Rasim <mohammad.rasim96@gmail.com>
Subject: [PATCH v2 2/2] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth
Date: Wed, 20 Nov 2019 14:02:35 +0300	[thread overview]
Message-ID: <20191120110235.13987-3-mohammad.rasim96@gmail.com> (raw)
In-Reply-To: <20191120110235.13987-1-mohammad.rasim96@gmail.com>

This patch adds the device ID for the BCM4335A0 module
(part of the AMPAK AP6335 WIFI/Bluetooth combo)

hciconfig output:
```
hci1:   Type: Primary  Bus: UART
        BD Address: 43:35:B0:07:1F:AC  ACL MTU: 1021:8  SCO MTU: 64:1
        UP RUNNING
        RX bytes:5079 acl:0 sco:0 events:567 errors:0
        TX bytes:69065 acl:0 sco:0 commands:567 errors:0
        Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH SNIFF
        Link mode: SLAVE ACCEPT
        Name: 'alarm'
        Class: 0x000000
        Service Classes: Unspecified
        Device Class: Miscellaneous,
        HCI Version: 4.0 (0x6)  Revision: 0x161
        LMP Version: 4.0 (0x6)  Subversion: 0x4106
        Manufacturer: Broadcom Corporation (15)
```

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
 drivers/bluetooth/btbcm.c   | 1 +
 drivers/bluetooth/hci_bcm.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 0bb9023ec214..689c7f36fea2 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -342,6 +342,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
 	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */
 	{ 0x6106, "BCM4359C0"	},	/* 003.001.006 */
+	{ 0x4106, "BCM4335A0"	},	/* 002.001.006 */
 	{ }
 };
 
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 0f851c0dde7f..d2a6a4afdbbb 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1425,6 +1425,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
 	{ .compatible = "brcm,bcm4330-bt" },
 	{ .compatible = "brcm,bcm43438-bt" },
 	{ .compatible = "brcm,bcm43540-bt" },
+	{ .compatible = "brcm,bcm4335a0" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Mohammad Rasim <mohammad.rasim96@gmail.com>
To: linux-bluetooth@vger.kernel.org,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Marcel Holtmann <marcel@holtmann.org>,
	linux-amlogic@lists.infradead.org
Cc: Mohammad Rasim <mohammad.rasim96@gmail.com>
Subject: [PATCH v2 2/2] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth
Date: Wed, 20 Nov 2019 14:02:35 +0300	[thread overview]
Message-ID: <20191120110235.13987-3-mohammad.rasim96@gmail.com> (raw)
In-Reply-To: <20191120110235.13987-1-mohammad.rasim96@gmail.com>

This patch adds the device ID for the BCM4335A0 module
(part of the AMPAK AP6335 WIFI/Bluetooth combo)

hciconfig output:
```
hci1:   Type: Primary  Bus: UART
        BD Address: 43:35:B0:07:1F:AC  ACL MTU: 1021:8  SCO MTU: 64:1
        UP RUNNING
        RX bytes:5079 acl:0 sco:0 events:567 errors:0
        TX bytes:69065 acl:0 sco:0 commands:567 errors:0
        Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH SNIFF
        Link mode: SLAVE ACCEPT
        Name: 'alarm'
        Class: 0x000000
        Service Classes: Unspecified
        Device Class: Miscellaneous,
        HCI Version: 4.0 (0x6)  Revision: 0x161
        LMP Version: 4.0 (0x6)  Subversion: 0x4106
        Manufacturer: Broadcom Corporation (15)
```

Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com>
---
 drivers/bluetooth/btbcm.c   | 1 +
 drivers/bluetooth/hci_bcm.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 0bb9023ec214..689c7f36fea2 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -342,6 +342,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
 	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */
 	{ 0x6106, "BCM4359C0"	},	/* 003.001.006 */
+	{ 0x4106, "BCM4335A0"	},	/* 002.001.006 */
 	{ }
 };
 
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 0f851c0dde7f..d2a6a4afdbbb 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1425,6 +1425,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = {
 	{ .compatible = "brcm,bcm4330-bt" },
 	{ .compatible = "brcm,bcm43438-bt" },
 	{ .compatible = "brcm,bcm43540-bt" },
+	{ .compatible = "brcm,bcm4335a0" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2019-11-20 11:02 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20191120110235.13987-1-mohammad.rasim96@gmail.com>
2019-11-20 11:02 ` [PATCH v2 1/2] dt-bindings: net: Add compatible for BCM4335A0 bluetooth Mohammad Rasim
2019-11-20 11:02   ` Mohammad Rasim
2019-11-21  7:11   ` Marcel Holtmann
2019-11-21  7:11     ` Marcel Holtmann
2019-11-20 11:02 ` Mohammad Rasim [this message]
2019-11-20 11:02   ` [PATCH v2 2/2] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Mohammad Rasim
2019-11-21  7:12   ` Marcel Holtmann
2019-11-21  7:12     ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191120110235.13987-3-mohammad.rasim96@gmail.com \
    --to=mohammad.rasim96@gmail.com \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.