[PATCH] m68k: Fix Kconfig indentation

[Krzysztof Kozlowski <krzk@kernel.org>]

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/Kconfig.bus     |  2 +-
 arch/m68k/Kconfig.debug   | 16 ++++++++--------
 arch/m68k/Kconfig.machine |  8 ++++----
 3 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index 9d0a3a23d50e..f1be832e2b74 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -66,6 +66,6 @@ endif
 if !MMU
 
 config ISA_DMA_API
-        def_bool !M5272
+	def_bool !M5272
 
 endif
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index f43643111eaf..11b306bdd788 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -12,16 +12,16 @@ config EARLY_PRINTK
 	bool "Early printk"
 	depends on !(SUN3 || M68000 || COLDFIRE)
 	help
-          Write kernel log output directly to a serial port.
-          Where implemented, output goes to the framebuffer as well.
-          PROM console functionality on Sun 3x is not affected by this option.
+	  Write kernel log output directly to a serial port.
+	  Where implemented, output goes to the framebuffer as well.
+	  PROM console functionality on Sun 3x is not affected by this option.
 
-          Pass "earlyprintk" on the kernel command line to get a
-          boot console.
+	  Pass "earlyprintk" on the kernel command line to get a
+	  boot console.
 
-          This is useful for kernel debugging when your machine crashes very
-          early, i.e. before the normal console driver is loaded.
-          You should normally say N here, unless you want to debug such a crash.
+	  This is useful for kernel debugging when your machine crashes very
+	  early, i.e. before the normal console driver is loaded.
+	  You should normally say N here, unless you want to debug such a crash.
 
 if !MMU
 
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index c01e103492fd..b23a66bac77f 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -269,10 +269,10 @@ config AMCORE
 	  Support for the Sysam AMCORE open-hardware generic board.
 
 config STMARK2
-        bool "Sysam stmark2 board support"
-        depends on M5441x
-        help
-          Support for the Sysam stmark2 open-hardware generic board.
+	bool "Sysam stmark2 board support"
+	depends on M5441x
+	help
+	  Support for the Sysam stmark2 open-hardware generic board.
 
 config FIREBEE
 	bool "FireBee board support"
-- 
2.17.1