All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
	Support Opensource <support.opensource@diasemi.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com,
	Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv2 6/6] ASoC: da7213: Add default clock handling
Date: Wed, 20 Nov 2019 16:24:06 +0100	[thread overview]
Message-ID: <20191120152406.2744-7-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20191120152406.2744-1-sebastian.reichel@collabora.com>

This adds default clock/PLL configuration to the driver
for usage with generic drivers like simple-card for usage
with a fixed rate clock.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 sound/soc/codecs/da7213.c | 75 ++++++++++++++++++++++++++++++++++++---
 sound/soc/codecs/da7213.h |  2 ++
 2 files changed, 73 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
index 3e6ad996741b..ff1a936240be 100644
--- a/sound/soc/codecs/da7213.c
+++ b/sound/soc/codecs/da7213.c
@@ -1156,6 +1156,7 @@ static int da7213_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_soc_dai *dai)
 {
 	struct snd_soc_component *component = dai->component;
+	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
 	u8 dai_ctrl = 0;
 	u8 fs;
 
@@ -1181,33 +1182,43 @@ static int da7213_hw_params(struct snd_pcm_substream *substream,
 	switch (params_rate(params)) {
 	case 8000:
 		fs = DA7213_SR_8000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 11025:
 		fs = DA7213_SR_11025;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 12000:
 		fs = DA7213_SR_12000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 16000:
 		fs = DA7213_SR_16000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 22050:
 		fs = DA7213_SR_22050;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 32000:
 		fs = DA7213_SR_32000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 44100:
 		fs = DA7213_SR_44100;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 48000:
 		fs = DA7213_SR_48000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 88200:
 		fs = DA7213_SR_88200;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 96000:
 		fs = DA7213_SR_96000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	default:
 		return -EINVAL;
@@ -1392,9 +1403,9 @@ static int da7213_set_component_sysclk(struct snd_soc_component *component,
 }
 
 /* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */
-static int da7213_set_component_pll(struct snd_soc_component *component,
-				    int pll_id, int source,
-				    unsigned int fref, unsigned int fout)
+static int _da7213_set_component_pll(struct snd_soc_component *component,
+				     int pll_id, int source,
+				     unsigned int fref, unsigned int fout)
 {
 	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
 
@@ -1503,6 +1514,16 @@ static int da7213_set_component_pll(struct snd_soc_component *component,
 	return 0;
 }
 
+static int da7213_set_component_pll(struct snd_soc_component *component,
+				    int pll_id, int source,
+				    unsigned int fref, unsigned int fout)
+{
+	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
+	da7213->fixed_clk_auto_pll = false;
+
+	return _da7213_set_component_pll(component, pll_id, source, fref, fout);
+}
+
 /* DAI operations */
 static const struct snd_soc_dai_ops da7213_dai_ops = {
 	.hw_params	= da7213_hw_params,
@@ -1532,6 +1553,43 @@ static struct snd_soc_dai_driver da7213_dai = {
 	.symmetric_rates = 1,
 };
 
+static int da7213_set_auto_pll(struct snd_soc_component *component, bool enable)
+{
+	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
+	int mode;
+
+	if (!da7213->fixed_clk_auto_pll)
+		return 0;
+
+	da7213->mclk_rate = clk_get_rate(da7213->mclk);
+
+	if (enable)
+		mode = DA7213_SYSCLK_PLL;
+	else
+		mode = DA7213_SYSCLK_MCLK;
+
+	switch (da7213->out_rate) {
+	case DA7213_PLL_FREQ_OUT_90316800:
+		if (da7213->mclk_rate == 11289600 ||
+		    da7213->mclk_rate == 22579200 ||
+		    da7213->mclk_rate == 45158400)
+			mode = DA7213_SYSCLK_MCLK;
+		break;
+	case DA7213_PLL_FREQ_OUT_98304000:
+		if (da7213->mclk_rate == 12288000 ||
+		    da7213->mclk_rate == 24576000 ||
+		    da7213->mclk_rate == 49152000)
+			mode = DA7213_SYSCLK_MCLK;
+
+		break;
+	default:
+		return -1;
+	}
+
+	return _da7213_set_component_pll(component, 0, mode,
+					 da7213->mclk_rate, da7213->out_rate);
+}
+
 static int da7213_set_bias_level(struct snd_soc_component *component,
 				 enum snd_soc_bias_level level)
 {
@@ -1551,6 +1609,8 @@ static int da7213_set_bias_level(struct snd_soc_component *component,
 						"Failed to enable mclk\n");
 					return ret;
 				}
+
+				da7213_set_auto_pll(component, true);
 			}
 		}
 		break;
@@ -1562,8 +1622,10 @@ static int da7213_set_bias_level(struct snd_soc_component *component,
 					    DA7213_VMID_EN | DA7213_BIAS_EN);
 		} else {
 			/* Remove MCLK */
-			if (da7213->mclk)
+			if (da7213->mclk) {
+				da7213_set_auto_pll(component, false);
 				clk_disable_unprepare(da7213->mclk);
+			}
 		}
 		break;
 	case SND_SOC_BIAS_OFF:
@@ -1829,6 +1891,11 @@ static int da7213_probe(struct snd_soc_component *component)
 			return PTR_ERR(da7213->mclk);
 		else
 			da7213->mclk = NULL;
+	} else {
+		/* Do automatic PLL handling assuming fixed clock until
+		 * set_pll() has been called. This makes the codec usable
+		 * with the simple-audio-card driver. */
+		da7213->fixed_clk_auto_pll = true;
 	}
 
 	return 0;
diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
index 3890829dfb6e..97ccf0ddd2be 100644
--- a/sound/soc/codecs/da7213.h
+++ b/sound/soc/codecs/da7213.h
@@ -535,10 +535,12 @@ struct da7213_priv {
 	struct regulator_bulk_data supplies[DA7213_NUM_SUPPLIES];
 	struct clk *mclk;
 	unsigned int mclk_rate;
+	unsigned int out_rate;
 	int clk_src;
 	bool master;
 	bool alc_calib_auto;
 	bool alc_en;
+	bool fixed_clk_auto_pll;
 	struct da7213_platform_data *pdata;
 };
 
-- 
2.24.0


WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
	Support Opensource <support.opensource@diasemi.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, Takashi Iwai <tiwai@suse.com>,
	linux-kernel@vger.kernel.org,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	kernel@collabora.com
Subject: [alsa-devel] [PATCHv2 6/6] ASoC: da7213: Add default clock handling
Date: Wed, 20 Nov 2019 16:24:06 +0100	[thread overview]
Message-ID: <20191120152406.2744-7-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20191120152406.2744-1-sebastian.reichel@collabora.com>

This adds default clock/PLL configuration to the driver
for usage with generic drivers like simple-card for usage
with a fixed rate clock.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 sound/soc/codecs/da7213.c | 75 ++++++++++++++++++++++++++++++++++++---
 sound/soc/codecs/da7213.h |  2 ++
 2 files changed, 73 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
index 3e6ad996741b..ff1a936240be 100644
--- a/sound/soc/codecs/da7213.c
+++ b/sound/soc/codecs/da7213.c
@@ -1156,6 +1156,7 @@ static int da7213_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_soc_dai *dai)
 {
 	struct snd_soc_component *component = dai->component;
+	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
 	u8 dai_ctrl = 0;
 	u8 fs;
 
@@ -1181,33 +1182,43 @@ static int da7213_hw_params(struct snd_pcm_substream *substream,
 	switch (params_rate(params)) {
 	case 8000:
 		fs = DA7213_SR_8000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 11025:
 		fs = DA7213_SR_11025;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 12000:
 		fs = DA7213_SR_12000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 16000:
 		fs = DA7213_SR_16000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 22050:
 		fs = DA7213_SR_22050;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 32000:
 		fs = DA7213_SR_32000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 44100:
 		fs = DA7213_SR_44100;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 48000:
 		fs = DA7213_SR_48000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	case 88200:
 		fs = DA7213_SR_88200;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_90316800;
 		break;
 	case 96000:
 		fs = DA7213_SR_96000;
+		da7213->out_rate = DA7213_PLL_FREQ_OUT_98304000;
 		break;
 	default:
 		return -EINVAL;
@@ -1392,9 +1403,9 @@ static int da7213_set_component_sysclk(struct snd_soc_component *component,
 }
 
 /* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */
-static int da7213_set_component_pll(struct snd_soc_component *component,
-				    int pll_id, int source,
-				    unsigned int fref, unsigned int fout)
+static int _da7213_set_component_pll(struct snd_soc_component *component,
+				     int pll_id, int source,
+				     unsigned int fref, unsigned int fout)
 {
 	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
 
@@ -1503,6 +1514,16 @@ static int da7213_set_component_pll(struct snd_soc_component *component,
 	return 0;
 }
 
+static int da7213_set_component_pll(struct snd_soc_component *component,
+				    int pll_id, int source,
+				    unsigned int fref, unsigned int fout)
+{
+	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
+	da7213->fixed_clk_auto_pll = false;
+
+	return _da7213_set_component_pll(component, pll_id, source, fref, fout);
+}
+
 /* DAI operations */
 static const struct snd_soc_dai_ops da7213_dai_ops = {
 	.hw_params	= da7213_hw_params,
@@ -1532,6 +1553,43 @@ static struct snd_soc_dai_driver da7213_dai = {
 	.symmetric_rates = 1,
 };
 
+static int da7213_set_auto_pll(struct snd_soc_component *component, bool enable)
+{
+	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
+	int mode;
+
+	if (!da7213->fixed_clk_auto_pll)
+		return 0;
+
+	da7213->mclk_rate = clk_get_rate(da7213->mclk);
+
+	if (enable)
+		mode = DA7213_SYSCLK_PLL;
+	else
+		mode = DA7213_SYSCLK_MCLK;
+
+	switch (da7213->out_rate) {
+	case DA7213_PLL_FREQ_OUT_90316800:
+		if (da7213->mclk_rate == 11289600 ||
+		    da7213->mclk_rate == 22579200 ||
+		    da7213->mclk_rate == 45158400)
+			mode = DA7213_SYSCLK_MCLK;
+		break;
+	case DA7213_PLL_FREQ_OUT_98304000:
+		if (da7213->mclk_rate == 12288000 ||
+		    da7213->mclk_rate == 24576000 ||
+		    da7213->mclk_rate == 49152000)
+			mode = DA7213_SYSCLK_MCLK;
+
+		break;
+	default:
+		return -1;
+	}
+
+	return _da7213_set_component_pll(component, 0, mode,
+					 da7213->mclk_rate, da7213->out_rate);
+}
+
 static int da7213_set_bias_level(struct snd_soc_component *component,
 				 enum snd_soc_bias_level level)
 {
@@ -1551,6 +1609,8 @@ static int da7213_set_bias_level(struct snd_soc_component *component,
 						"Failed to enable mclk\n");
 					return ret;
 				}
+
+				da7213_set_auto_pll(component, true);
 			}
 		}
 		break;
@@ -1562,8 +1622,10 @@ static int da7213_set_bias_level(struct snd_soc_component *component,
 					    DA7213_VMID_EN | DA7213_BIAS_EN);
 		} else {
 			/* Remove MCLK */
-			if (da7213->mclk)
+			if (da7213->mclk) {
+				da7213_set_auto_pll(component, false);
 				clk_disable_unprepare(da7213->mclk);
+			}
 		}
 		break;
 	case SND_SOC_BIAS_OFF:
@@ -1829,6 +1891,11 @@ static int da7213_probe(struct snd_soc_component *component)
 			return PTR_ERR(da7213->mclk);
 		else
 			da7213->mclk = NULL;
+	} else {
+		/* Do automatic PLL handling assuming fixed clock until
+		 * set_pll() has been called. This makes the codec usable
+		 * with the simple-audio-card driver. */
+		da7213->fixed_clk_auto_pll = true;
 	}
 
 	return 0;
diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
index 3890829dfb6e..97ccf0ddd2be 100644
--- a/sound/soc/codecs/da7213.h
+++ b/sound/soc/codecs/da7213.h
@@ -535,10 +535,12 @@ struct da7213_priv {
 	struct regulator_bulk_data supplies[DA7213_NUM_SUPPLIES];
 	struct clk *mclk;
 	unsigned int mclk_rate;
+	unsigned int out_rate;
 	int clk_src;
 	bool master;
 	bool alc_calib_auto;
 	bool alc_en;
+	bool fixed_clk_auto_pll;
 	struct da7213_platform_data *pdata;
 };
 
-- 
2.24.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

  parent reply	other threads:[~2019-11-20 15:24 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-20 15:24 [PATCHv2 0/6] ASoC: da7213: support for usage with simple-card Sebastian Reichel
2019-11-20 15:24 ` [alsa-devel] " Sebastian Reichel
2019-11-20 15:24 ` [PATCHv2 1/6] ASoC: da7213: Add da7212 DT compatible Sebastian Reichel
2019-11-20 15:24   ` [alsa-devel] " Sebastian Reichel
2019-11-21 20:10   ` Adam Thomson
2019-11-21 20:10     ` [alsa-devel] " Adam Thomson
2019-11-22 17:20     ` Sebastian Reichel
2019-11-22 17:20       ` [alsa-devel] " Sebastian Reichel
2019-11-20 15:24 ` [PATCHv2 2/6] ASoC: da7213: Add regulator support Sebastian Reichel
2019-11-20 15:24   ` [alsa-devel] " Sebastian Reichel
2019-11-21 21:15   ` Adam Thomson
2019-11-21 21:15     ` [alsa-devel] " Adam Thomson
2019-11-22 17:09     ` Sebastian Reichel
2019-11-22 17:09       ` [alsa-devel] " Sebastian Reichel
2019-11-26 17:02       ` Adam Thomson
2019-11-26 17:02         ` [alsa-devel] " Adam Thomson
2019-11-20 15:24 ` [PATCHv2 3/6] ASoC: da7213: Provide selectable option Sebastian Reichel
2019-11-20 15:24   ` [alsa-devel] " Sebastian Reichel
2019-11-26 17:05   ` Adam Thomson
2019-11-26 17:05     ` [alsa-devel] " Adam Thomson
2019-11-20 15:24 ` [PATCHv2 4/6] ASoC: da7213: Move set_sysclk to codec level Sebastian Reichel
2019-11-20 15:24   ` [alsa-devel] " Sebastian Reichel
2019-11-26 17:09   ` Adam Thomson
2019-11-26 17:09     ` [alsa-devel] " Adam Thomson
2019-11-20 15:24 ` [PATCHv2 5/6] ASoC: da7213: Move set_pll " Sebastian Reichel
2019-11-20 15:24   ` [alsa-devel] " Sebastian Reichel
2019-11-26 17:10   ` Adam Thomson
2019-11-26 17:10     ` [alsa-devel] " Adam Thomson
2019-11-20 15:24 ` Sebastian Reichel [this message]
2019-11-20 15:24   ` [alsa-devel] [PATCHv2 6/6] ASoC: da7213: Add default clock handling Sebastian Reichel
2019-11-21 21:49   ` Adam Thomson
2019-11-21 21:49     ` [alsa-devel] " Adam Thomson
2019-11-26 16:55     ` Adam Thomson
2019-11-26 16:55       ` [alsa-devel] " Adam Thomson
2019-11-26 17:08       ` Mark Brown
2019-11-26 17:08         ` [alsa-devel] " Mark Brown
2019-11-26 17:39         ` Adam Thomson
2019-11-26 17:39           ` [alsa-devel] " Adam Thomson
2019-11-26 17:50           ` Mark Brown
2019-11-26 17:50             ` [alsa-devel] " Mark Brown
2019-11-27 11:32             ` Adam Thomson
2019-11-27 11:32               ` [alsa-devel] " Adam Thomson
2019-11-27 12:33               ` Mark Brown
2019-11-27 12:33                 ` [alsa-devel] " Mark Brown
2019-11-27 13:42                 ` Adam Thomson
2019-11-27 13:42                   ` [alsa-devel] " Adam Thomson
2019-11-27 15:40                   ` Mark Brown
2019-11-27 15:40                     ` [alsa-devel] " Mark Brown
2019-11-27 16:33                     ` Adam Thomson
2019-11-27 16:33                       ` [alsa-devel] " Adam Thomson
2019-11-27 16:41                       ` Mark Brown
2019-11-27 16:41                         ` [alsa-devel] " Mark Brown
2019-11-27 18:10                         ` Adam Thomson
2019-11-27 18:10                           ` [alsa-devel] " Adam Thomson
2019-11-28 13:13                           ` Mark Brown
2019-11-28 13:13                             ` [alsa-devel] " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191120152406.2744-7-sebastian.reichel@collabora.com \
    --to=sebastian.reichel@collabora.com \
    --cc=Adam.Thomson.Opensource@diasemi.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=kernel@collabora.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=support.opensource@diasemi.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.