All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>
Cc: <vkoul@kernel.org>, <linux-crypto@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 3/3] crypto: atmel-tdes - Retire dma_request_slave_channel_compat()
Date: Thu, 21 Nov 2019 12:16:02 +0200	[thread overview]
Message-ID: <20191121101602.21941-4-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20191121101602.21941-1-peter.ujfalusi@ti.com>

The driver no longer boots in legacy mode, only via DT. This makes the
dma_request_slave_channel_compat() redundant.
If ever the filter function would be executed it will return false as the
dma_slave is not really initialized.

Switch to use dma_request_chan() which would allow legacy boot if ever
needed again by configuring dma_slave_map for the DMA driver.

At the same time skip allocating memory for dma_slave as it is not used
anymore.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/crypto/atmel-tdes.c | 47 ++++++++++---------------------------
 1 file changed, 13 insertions(+), 34 deletions(-)

diff --git a/drivers/crypto/atmel-tdes.c b/drivers/crypto/atmel-tdes.c
index bb7c0a387c04..fbc76edaef3e 100644
--- a/drivers/crypto/atmel-tdes.c
+++ b/drivers/crypto/atmel-tdes.c
@@ -703,31 +703,17 @@ static int atmel_tdes_crypt(struct skcipher_request *req, unsigned long mode)
 	return atmel_tdes_handle_queue(ctx->dd, req);
 }
 
-static bool atmel_tdes_filter(struct dma_chan *chan, void *slave)
-{
-	struct at_dma_slave	*sl = slave;
-
-	if (sl && sl->dma_dev == chan->device->dev) {
-		chan->private = sl;
-		return true;
-	} else {
-		return false;
-	}
-}
-
 static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
 			struct crypto_platform_data *pdata)
 {
-	dma_cap_mask_t mask;
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
+	int ret;
 
 	/* Try to grab 2 DMA channels */
-	dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask,
-			atmel_tdes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
-	if (!dd->dma_lch_in.chan)
+	dd->dma_lch_in.chan = dma_request_chan(dd->dev, "tx");
+	if (IS_ERR(dd->dma_lch_in.chan)) {
+		ret = PTR_ERR(dd->dma_lch_in.chan);
 		goto err_dma_in;
+	}
 
 	dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
 	dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
@@ -740,10 +726,11 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
 		DMA_SLAVE_BUSWIDTH_4_BYTES;
 	dd->dma_lch_in.dma_conf.device_fc = false;
 
-	dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask,
-			atmel_tdes_filter, &pdata->dma_slave->txdata, dd->dev, "rx");
-	if (!dd->dma_lch_out.chan)
+	dd->dma_lch_out.chan = dma_request_chan(dd->dev, "rx");
+	if (IS_ERR(dd->dma_lch_out.chan)) {
+		ret = PTR_ERR(dd->dma_lch_out.chan);
 		goto err_dma_out;
+	}
 
 	dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
 	dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
@@ -761,8 +748,9 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
 err_dma_out:
 	dma_release_channel(dd->dma_lch_in.chan);
 err_dma_in:
-	dev_warn(dd->dev, "no DMA channel available\n");
-	return -ENODEV;
+	if (ret != -EPROBE_DEFER)
+		dev_warn(dd->dev, "no DMA channel available\n");
+	return ret;
 }
 
 static void atmel_tdes_dma_cleanup(struct atmel_tdes_dev *dd)
@@ -1193,12 +1181,6 @@ static struct crypto_platform_data *atmel_tdes_of_init(struct platform_device *p
 	if (!pdata)
 		return ERR_PTR(-ENOMEM);
 
-	pdata->dma_slave = devm_kzalloc(&pdev->dev,
-					sizeof(*(pdata->dma_slave)),
-					GFP_KERNEL);
-	if (!pdata->dma_slave)
-		return ERR_PTR(-ENOMEM);
-
 	return pdata;
 }
 #else /* CONFIG_OF */
@@ -1292,10 +1274,7 @@ static int atmel_tdes_probe(struct platform_device *pdev)
 				goto err_pdata;
 			}
 		}
-		if (!pdata->dma_slave) {
-			err = -ENXIO;
-			goto err_pdata;
-		}
+
 		err = atmel_tdes_dma_init(tdes_dd, pdata);
 		if (err)
 			goto err_tdes_dma;
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>
Cc: vkoul@kernel.org, linux-crypto@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] crypto: atmel-tdes - Retire dma_request_slave_channel_compat()
Date: Thu, 21 Nov 2019 12:16:02 +0200	[thread overview]
Message-ID: <20191121101602.21941-4-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20191121101602.21941-1-peter.ujfalusi@ti.com>

The driver no longer boots in legacy mode, only via DT. This makes the
dma_request_slave_channel_compat() redundant.
If ever the filter function would be executed it will return false as the
dma_slave is not really initialized.

Switch to use dma_request_chan() which would allow legacy boot if ever
needed again by configuring dma_slave_map for the DMA driver.

At the same time skip allocating memory for dma_slave as it is not used
anymore.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/crypto/atmel-tdes.c | 47 ++++++++++---------------------------
 1 file changed, 13 insertions(+), 34 deletions(-)

diff --git a/drivers/crypto/atmel-tdes.c b/drivers/crypto/atmel-tdes.c
index bb7c0a387c04..fbc76edaef3e 100644
--- a/drivers/crypto/atmel-tdes.c
+++ b/drivers/crypto/atmel-tdes.c
@@ -703,31 +703,17 @@ static int atmel_tdes_crypt(struct skcipher_request *req, unsigned long mode)
 	return atmel_tdes_handle_queue(ctx->dd, req);
 }
 
-static bool atmel_tdes_filter(struct dma_chan *chan, void *slave)
-{
-	struct at_dma_slave	*sl = slave;
-
-	if (sl && sl->dma_dev == chan->device->dev) {
-		chan->private = sl;
-		return true;
-	} else {
-		return false;
-	}
-}
-
 static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
 			struct crypto_platform_data *pdata)
 {
-	dma_cap_mask_t mask;
-
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
+	int ret;
 
 	/* Try to grab 2 DMA channels */
-	dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask,
-			atmel_tdes_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
-	if (!dd->dma_lch_in.chan)
+	dd->dma_lch_in.chan = dma_request_chan(dd->dev, "tx");
+	if (IS_ERR(dd->dma_lch_in.chan)) {
+		ret = PTR_ERR(dd->dma_lch_in.chan);
 		goto err_dma_in;
+	}
 
 	dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
 	dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
@@ -740,10 +726,11 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
 		DMA_SLAVE_BUSWIDTH_4_BYTES;
 	dd->dma_lch_in.dma_conf.device_fc = false;
 
-	dd->dma_lch_out.chan = dma_request_slave_channel_compat(mask,
-			atmel_tdes_filter, &pdata->dma_slave->txdata, dd->dev, "rx");
-	if (!dd->dma_lch_out.chan)
+	dd->dma_lch_out.chan = dma_request_chan(dd->dev, "rx");
+	if (IS_ERR(dd->dma_lch_out.chan)) {
+		ret = PTR_ERR(dd->dma_lch_out.chan);
 		goto err_dma_out;
+	}
 
 	dd->dma_lch_out.dma_conf.direction = DMA_DEV_TO_MEM;
 	dd->dma_lch_out.dma_conf.src_addr = dd->phys_base +
@@ -761,8 +748,9 @@ static int atmel_tdes_dma_init(struct atmel_tdes_dev *dd,
 err_dma_out:
 	dma_release_channel(dd->dma_lch_in.chan);
 err_dma_in:
-	dev_warn(dd->dev, "no DMA channel available\n");
-	return -ENODEV;
+	if (ret != -EPROBE_DEFER)
+		dev_warn(dd->dev, "no DMA channel available\n");
+	return ret;
 }
 
 static void atmel_tdes_dma_cleanup(struct atmel_tdes_dev *dd)
@@ -1193,12 +1181,6 @@ static struct crypto_platform_data *atmel_tdes_of_init(struct platform_device *p
 	if (!pdata)
 		return ERR_PTR(-ENOMEM);
 
-	pdata->dma_slave = devm_kzalloc(&pdev->dev,
-					sizeof(*(pdata->dma_slave)),
-					GFP_KERNEL);
-	if (!pdata->dma_slave)
-		return ERR_PTR(-ENOMEM);
-
 	return pdata;
 }
 #else /* CONFIG_OF */
@@ -1292,10 +1274,7 @@ static int atmel_tdes_probe(struct platform_device *pdev)
 				goto err_pdata;
 			}
 		}
-		if (!pdata->dma_slave) {
-			err = -ENXIO;
-			goto err_pdata;
-		}
+
 		err = atmel_tdes_dma_init(tdes_dd, pdata);
 		if (err)
 			goto err_tdes_dma;
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-11-21 10:16 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-21 10:15 [PATCH v2 0/3] crypto: atmel - Retire dma_request_slave_channel_compat() Peter Ujfalusi
2019-11-21 10:15 ` Peter Ujfalusi
2019-11-21 10:16 ` [PATCH v2 1/3] crypto: atmel-aes " Peter Ujfalusi
2019-11-21 10:16   ` Peter Ujfalusi
2019-11-21 10:16 ` [PATCH v2 2/3] crypto: atmel-sha " Peter Ujfalusi
2019-11-21 10:16   ` Peter Ujfalusi
2019-11-21 10:16 ` Peter Ujfalusi [this message]
2019-11-21 10:16   ` [PATCH v2 3/3] crypto: atmel-tdes " Peter Ujfalusi
2019-11-22  4:37 ` [PATCH v2 0/3] crypto: atmel " Vinod Koul
2019-11-22  4:37   ` Vinod Koul
2019-12-11  9:36 ` Herbert Xu
2019-12-11  9:36   ` Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191121101602.21941-4-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.