From: Vasily Khoruzhick <anarsoul@gmail.com> To: "Yangtao Li" <tiny.windzz@gmail.com>, "Zhang Rui" <rui.zhang@intel.com>, "Eduardo Valentin" <edubezval@gmail.com>, "Daniel Lezcano" <daniel.lezcano@linaro.org>, "Amit Kucheria" <amit.kucheria@verdurent.com>, "Rob Herring" <robh+dt@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Maxime Ripard" <mripard@kernel.org>, "Chen-Yu Tsai" <wens@csie.org>, "Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>, "David S. Miller" <davem@davemloft.net>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Ondřej Jirman" <megous@megous.com>, linux-kernel@vger.kernel.org Cc: Vasily Khoruzhick <anarsoul@gmail.com> Subject: [PATCH v6 3/7] ARM: dts: sun8i-a83t: Add thermal sensor and thermal zones Date: Tue, 26 Nov 2019 21:29:31 -0800 [thread overview] Message-ID: <20191127052935.1719897-4-anarsoul@gmail.com> (raw) In-Reply-To: <20191127052935.1719897-1-anarsoul@gmail.com> From: Ondrej Jirman <megous@megous.com> There are three sensors, two for each CPU cluster, one for GPU. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 36 +++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 74bb053cf23c..902fee8be688 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -50,6 +50,7 @@ #include <dt-bindings/reset/sun8i-a83t-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -581,6 +582,12 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun8i-a83t-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 8>; + }; }; usb_otg: usb@1c19000 { @@ -1156,5 +1163,34 @@ #address-cells = <1>; #size-cells = <0>; }; + + ths: ths@1f04000 { + compatible = "allwinner,sun8i-a83t-ths"; + reg = <0x01f04000 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; }; }; -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Vasily Khoruzhick <anarsoul@gmail.com> To: "Yangtao Li" <tiny.windzz@gmail.com>, "Zhang Rui" <rui.zhang@intel.com>, "Eduardo Valentin" <edubezval@gmail.com>, "Daniel Lezcano" <daniel.lezcano@linaro.org>, "Amit Kucheria" <amit.kucheria@verdurent.com>, "Rob Herring" <robh+dt@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Maxime Ripard" <mripard@kernel.org>, "Chen-Yu Tsai" <wens@csie.org>, "Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>, "David S. Miller" <davem@davemloft.net>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Ondřej Jirman" <megous@megous.com>, linux-kernel@vger.kernel.org Subject: [PATCH v6 3/7] ARM: dts: sun8i-a83t: Add thermal sensor and thermal zones Date: Tue, 26 Nov 2019 21:29:31 -0800 [thread overview] Message-ID: <20191127052935.1719897-4-anarsoul@gmail.com> (raw) In-Reply-To: <20191127052935.1719897-1-anarsoul@gmail.com> From: Ondrej Jirman <megous@megous.com> There are three sensors, two for each CPU cluster, one for GPU. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 36 +++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 74bb053cf23c..902fee8be688 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -50,6 +50,7 @@ #include <dt-bindings/reset/sun8i-a83t-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -581,6 +582,12 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun8i-a83t-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 8>; + }; }; usb_otg: usb@1c19000 { @@ -1156,5 +1163,34 @@ #address-cells = <1>; #size-cells = <0>; }; + + ths: ths@1f04000 { + compatible = "allwinner,sun8i-a83t-ths"; + reg = <0x01f04000 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + cpu1_thermal: cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; }; }; -- 2.24.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-11-27 5:30 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-27 5:29 [PATCH v6 0/7] add thermal sensor driver for A64, A83T, H3, H5, H6, R40 Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick 2019-11-27 5:29 ` [PATCH v6 1/7] thermal: sun8i: add thermal driver for H6/H5/H3/A64/A83T/R40 Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick 2019-11-27 11:14 ` Ondřej Jirman 2019-11-27 11:14 ` Ondřej Jirman 2019-11-27 17:35 ` Maxime Ripard 2019-11-27 17:35 ` Maxime Ripard 2019-11-27 19:44 ` Frank Lee 2019-11-27 19:44 ` Frank Lee 2019-11-27 19:48 ` Vasily Khoruzhick 2019-11-27 19:48 ` Vasily Khoruzhick 2019-11-27 22:24 ` Ondřej Jirman 2019-11-27 22:24 ` Ondřej Jirman 2019-11-28 15:16 ` Frank Lee 2019-11-28 15:16 ` Frank Lee 2019-11-29 0:53 ` Ondřej Jirman 2019-11-29 0:53 ` Ondřej Jirman 2019-11-28 7:42 ` Maxime Ripard 2019-11-28 7:42 ` Maxime Ripard 2019-11-27 17:27 ` Maxime Ripard 2019-11-27 17:27 ` Maxime Ripard 2019-11-28 16:43 ` Frank Lee 2019-11-28 16:43 ` Frank Lee 2019-11-28 17:06 ` Ondřej Jirman 2019-11-28 17:06 ` Ondřej Jirman 2019-11-29 11:46 ` Frank Lee 2019-11-29 11:46 ` Frank Lee 2019-12-02 1:58 ` Ondřej Jirman 2019-12-02 1:58 ` Ondřej Jirman 2019-12-09 18:04 ` Frank Lee 2019-12-09 18:04 ` Frank Lee 2019-11-27 5:29 ` [PATCH v6 2/7] dt-bindings: thermal: add YAML schema for sun8i-thermal driver bindings Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick 2019-11-27 17:44 ` Maxime Ripard 2019-11-27 17:44 ` Maxime Ripard 2019-11-27 18:07 ` Ondřej Jirman 2019-11-27 18:07 ` Ondřej Jirman 2019-11-27 18:52 ` Vasily Khoruzhick 2019-11-27 18:52 ` Vasily Khoruzhick 2019-11-27 20:23 ` Vasily Khoruzhick 2019-11-27 20:23 ` Vasily Khoruzhick 2019-11-28 7:43 ` Maxime Ripard 2019-11-28 7:43 ` Maxime Ripard 2019-11-28 14:35 ` Frank Lee 2019-11-28 14:35 ` Frank Lee 2019-11-28 14:45 ` Frank Lee 2019-11-28 14:45 ` Frank Lee 2019-11-28 16:24 ` Vasily Khoruzhick 2019-11-28 16:24 ` Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick [this message] 2019-11-27 5:29 ` [PATCH v6 3/7] ARM: dts: sun8i-a83t: Add thermal sensor and thermal zones Vasily Khoruzhick 2019-11-27 5:29 ` [PATCH v6 4/7] ARM: dts: sun8i-h3: " Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick 2019-11-27 19:40 ` Samuel Holland 2019-11-27 19:40 ` Samuel Holland 2019-11-27 5:29 ` [PATCH v6 5/7] arm64: dts: allwinner: sun50i-h5: " Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick 2019-11-27 5:29 ` [PATCH v6 6/7] arm64: dts: allwinner: sun50i-h6: " Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick 2019-11-27 5:29 ` [PATCH v6 7/7] arm64: dts: allwinner: a64: Add thermal sensors " Vasily Khoruzhick 2019-11-27 5:29 ` Vasily Khoruzhick
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191127052935.1719897-4-anarsoul@gmail.com \ --to=anarsoul@gmail.com \ --cc=amit.kucheria@verdurent.com \ --cc=daniel.lezcano@linaro.org \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=edubezval@gmail.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mchehab+samsung@kernel.org \ --cc=megous@megous.com \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=tiny.windzz@gmail.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.