All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [CI 2/3] drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port
Date: Wed, 27 Nov 2019 14:13:13 -0800	[thread overview]
Message-ID: <20191127221314.575575-2-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20191127221314.575575-1-matthew.d.roper@intel.com>

When looking at SDEISR to determine the connection status of combo
outputs, we should use the phy index rather than the port index.
Although they're usually the same thing, EHL's DDI-D (port D) is
attached to PHY-A and SDEISR doesn't even have bits for a "D" output.
It's also possible that future platforms may map DDIs (the internal
display engine programming units) to PHYs (the output handling on the IO
side) in ways where port!=phy, so let's look at the PHY index by
default.

v2: Rename to intel_combo_phy_connected.  (Lucas)

Fixes: 719d24002602 ("drm/i915/ehl: Enable DDI-D")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 777adb875ba2..5c406a0fd045 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5487,15 +5487,13 @@ static bool bxt_digital_port_connected(struct intel_encoder *encoder)
 	return I915_READ(GEN8_DE_PORT_ISR) & bit;
 }
 
-static bool icl_combo_port_connected(struct drm_i915_private *dev_priv,
-				     struct intel_digital_port *intel_dig_port)
+static bool intel_combo_phy_connected(struct drm_i915_private *dev_priv,
+				      enum phy phy)
 {
-	enum port port = intel_dig_port->base.port;
-
-	if (HAS_PCH_MCC(dev_priv) && port == PORT_C)
+	if (HAS_PCH_MCC(dev_priv) && phy == PHY_C)
 		return I915_READ(SDEISR) & SDE_TC_HOTPLUG_ICP(PORT_TC1);
 
-	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
+	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(phy);
 }
 
 static bool icp_digital_port_connected(struct intel_encoder *encoder)
@@ -5505,7 +5503,7 @@ static bool icp_digital_port_connected(struct intel_encoder *encoder)
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
 	if (intel_phy_is_combo(dev_priv, phy))
-		return icl_combo_port_connected(dev_priv, dig_port);
+		return intel_combo_phy_connected(dev_priv, phy);
 	else if (intel_phy_is_tc(dev_priv, phy))
 		return intel_tc_port_connected(dig_port);
 	else
-- 
2.23.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

WARNING: multiple messages have this Message-ID (diff)
From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [CI 2/3] drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port
Date: Wed, 27 Nov 2019 14:13:13 -0800	[thread overview]
Message-ID: <20191127221314.575575-2-matthew.d.roper@intel.com> (raw)
Message-ID: <20191127221313.BqRMnewVlPJIn-SlETU7Wfa4dRO0sy6R3OL-rCJJGsY@z> (raw)
In-Reply-To: <20191127221314.575575-1-matthew.d.roper@intel.com>

When looking at SDEISR to determine the connection status of combo
outputs, we should use the phy index rather than the port index.
Although they're usually the same thing, EHL's DDI-D (port D) is
attached to PHY-A and SDEISR doesn't even have bits for a "D" output.
It's also possible that future platforms may map DDIs (the internal
display engine programming units) to PHYs (the output handling on the IO
side) in ways where port!=phy, so let's look at the PHY index by
default.

v2: Rename to intel_combo_phy_connected.  (Lucas)

Fixes: 719d24002602 ("drm/i915/ehl: Enable DDI-D")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 777adb875ba2..5c406a0fd045 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5487,15 +5487,13 @@ static bool bxt_digital_port_connected(struct intel_encoder *encoder)
 	return I915_READ(GEN8_DE_PORT_ISR) & bit;
 }
 
-static bool icl_combo_port_connected(struct drm_i915_private *dev_priv,
-				     struct intel_digital_port *intel_dig_port)
+static bool intel_combo_phy_connected(struct drm_i915_private *dev_priv,
+				      enum phy phy)
 {
-	enum port port = intel_dig_port->base.port;
-
-	if (HAS_PCH_MCC(dev_priv) && port == PORT_C)
+	if (HAS_PCH_MCC(dev_priv) && phy == PHY_C)
 		return I915_READ(SDEISR) & SDE_TC_HOTPLUG_ICP(PORT_TC1);
 
-	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
+	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(phy);
 }
 
 static bool icp_digital_port_connected(struct intel_encoder *encoder)
@@ -5505,7 +5503,7 @@ static bool icp_digital_port_connected(struct intel_encoder *encoder)
 	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
 	if (intel_phy_is_combo(dev_priv, phy))
-		return icl_combo_port_connected(dev_priv, dig_port);
+		return intel_combo_phy_connected(dev_priv, phy);
 	else if (intel_phy_is_tc(dev_priv, phy))
 		return intel_tc_port_connected(dig_port);
 	else
-- 
2.23.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-11-27 22:13 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27 22:13 [CI 1/3] drm/i915: Handle SDEISR according to PCH rather than platform Matt Roper
2019-11-27 22:13 ` [Intel-gfx] " Matt Roper
2019-11-27 22:13 ` Matt Roper [this message]
2019-11-27 22:13   ` [Intel-gfx] [CI 2/3] drm/i915/ehl: Make icp_digital_port_connected() use phy instead of port Matt Roper
2019-11-27 22:13 ` [CI 3/3] drm/i915: Program SHPD_FILTER_CNT on CNP+ Matt Roper
2019-11-27 22:13   ` [Intel-gfx] " Matt Roper
2019-11-28  0:09 ` ✓ Fi.CI.BAT: success for series starting with [CI,1/3] drm/i915: Handle SDEISR according to PCH rather than platform Patchwork
2019-11-28  0:09   ` [Intel-gfx] " Patchwork
2019-11-29  4:17 ` ✗ Fi.CI.IGT: failure " Patchwork
2019-11-29  4:17   ` [Intel-gfx] " Patchwork
2019-12-02 16:20   ` Matt Roper
2019-12-02 16:20     ` [Intel-gfx] " Matt Roper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191127221314.575575-2-matthew.d.roper@intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.