From: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> To: Heiko Stuebner <heiko@sntech.de>, dianders@chromium.org Cc: linux-bluetooth@vger.kernel.org, linux-rockchip@lists.infradead.org, Abhishek Pandit-Subedi <abhishekpandit@chromium.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/1] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron Date: Wed, 27 Nov 2019 14:39:08 -0800 [thread overview] Message-ID: <20191127223909.253873-1-abhishekpandit@chromium.org> (raw) Hi Heiko, The necessary patches for this change have been merged into bluetooth-next. Please pick this up at your convenience. This patch enables using the Broadcom HCI UART driver with the BCM43540 Wi-Fi + Bluetooth chip. This chip is used on a RK3288 based board (Veyron) and these changes have been tested on the Minnie variant of the board (i.e. rk3288-veyron-minnie.dts). The changes are applicable to the minnie, mickey, speedy and brain variants (all of which use the Broadcom chips). The bt-activity node was removed for all Veyron boards and shouldn't affect the boards using Marvell chips since they aren't using this out-of-band wakeup gpio. A previous portion of this series adding the compatible string to the hci_bcm driver has already been merged into bluetooth-next: https://lore.kernel.org/r/4680AA6A-599F-4D5E-9A96-0655569BAE94@holtmann.org Another patch series to fix up the baudrate settings and configure the PCM parameters has meen merged on bluetooth-next: https://lore.kernel.org/linux-bluetooth/20191127071105.GA32820@akivisil-mobl1.ger.corp.intel.com/T/#t Thanks Abhishek Changes in v2: - Changed sco routing params to brcm,bt-pcm-int-params Abhishek Pandit-Subedi (1): ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron arch/arm/boot/dts/rk3288-veyron-brain.dts | 9 +++ .../dts/rk3288-veyron-broadcom-bluetooth.dtsi | 22 +++++++ .../boot/dts/rk3288-veyron-chromebook.dtsi | 21 ------- arch/arm/boot/dts/rk3288-veyron-fievel.dts | 2 - arch/arm/boot/dts/rk3288-veyron-jaq.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-jerry.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-mickey.dts | 9 +++ arch/arm/boot/dts/rk3288-veyron-minnie.dts | 21 +++++++ arch/arm/boot/dts/rk3288-veyron-pinky.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-speedy.dts | 21 +++++++ arch/arm/boot/dts/rk3288-veyron.dtsi | 59 +++---------------- 11 files changed, 155 insertions(+), 75 deletions(-) create mode 100644 arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi -- 2.24.0.432.g9d3f5f5b63-goog
WARNING: multiple messages have this Message-ID (diff)
From: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> To: Heiko Stuebner <heiko@sntech.de>, dianders@chromium.org Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Abhishek Pandit-Subedi <abhishekpandit@chromium.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/1] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron Date: Wed, 27 Nov 2019 14:39:08 -0800 [thread overview] Message-ID: <20191127223909.253873-1-abhishekpandit@chromium.org> (raw) Hi Heiko, The necessary patches for this change have been merged into bluetooth-next. Please pick this up at your convenience. This patch enables using the Broadcom HCI UART driver with the BCM43540 Wi-Fi + Bluetooth chip. This chip is used on a RK3288 based board (Veyron) and these changes have been tested on the Minnie variant of the board (i.e. rk3288-veyron-minnie.dts). The changes are applicable to the minnie, mickey, speedy and brain variants (all of which use the Broadcom chips). The bt-activity node was removed for all Veyron boards and shouldn't affect the boards using Marvell chips since they aren't using this out-of-band wakeup gpio. A previous portion of this series adding the compatible string to the hci_bcm driver has already been merged into bluetooth-next: https://lore.kernel.org/r/4680AA6A-599F-4D5E-9A96-0655569BAE94@holtmann.org Another patch series to fix up the baudrate settings and configure the PCM parameters has meen merged on bluetooth-next: https://lore.kernel.org/linux-bluetooth/20191127071105.GA32820@akivisil-mobl1.ger.corp.intel.com/T/#t Thanks Abhishek Changes in v2: - Changed sco routing params to brcm,bt-pcm-int-params Abhishek Pandit-Subedi (1): ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron arch/arm/boot/dts/rk3288-veyron-brain.dts | 9 +++ .../dts/rk3288-veyron-broadcom-bluetooth.dtsi | 22 +++++++ .../boot/dts/rk3288-veyron-chromebook.dtsi | 21 ------- arch/arm/boot/dts/rk3288-veyron-fievel.dts | 2 - arch/arm/boot/dts/rk3288-veyron-jaq.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-jerry.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-mickey.dts | 9 +++ arch/arm/boot/dts/rk3288-veyron-minnie.dts | 21 +++++++ arch/arm/boot/dts/rk3288-veyron-pinky.dts | 22 +++++++ arch/arm/boot/dts/rk3288-veyron-speedy.dts | 21 +++++++ arch/arm/boot/dts/rk3288-veyron.dtsi | 59 +++---------------- 11 files changed, 155 insertions(+), 75 deletions(-) create mode 100644 arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi -- 2.24.0.432.g9d3f5f5b63-goog _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-11-27 22:39 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-27 22:39 Abhishek Pandit-Subedi [this message] 2019-11-27 22:39 ` [PATCH v2 0/1] ARM: dts: rockchip: Add brcm bluetooth for rk3288-veyron Abhishek Pandit-Subedi 2019-11-27 22:39 ` [PATCH v2 1/1] " Abhishek Pandit-Subedi 2019-11-27 22:39 ` Abhishek Pandit-Subedi 2019-12-08 23:48 ` Marcel Holtmann 2019-12-08 23:48 ` Marcel Holtmann 2019-12-09 0:03 ` Heiko Stübner 2019-12-09 0:03 ` Heiko Stübner 2019-12-09 23:56 ` Doug Anderson 2019-12-09 23:56 ` Doug Anderson 2019-12-10 0:32 ` Matthias Kaehlcke 2019-12-10 0:32 ` Matthias Kaehlcke 2019-12-10 7:44 ` Marcel Holtmann 2019-12-10 7:44 ` Marcel Holtmann 2019-12-10 22:32 ` Heiko Stuebner 2019-12-10 22:32 ` Heiko Stuebner 2019-12-16 19:29 ` Abhishek Pandit-Subedi 2019-12-16 19:29 ` Abhishek Pandit-Subedi 2019-12-16 19:29 ` Abhishek Pandit-Subedi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191127223909.253873-1-abhishekpandit@chromium.org \ --to=abhishekpandit@chromium.org \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-bluetooth@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.