From: Pascal Paillet <p.paillet@st.com> To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org> Cc: <p.paillet@st.com> Subject: [PATCH v3] regulator: Convert stm32-pwr regulator to json-schema Date: Thu, 5 Dec 2019 17:13:59 +0100 [thread overview] Message-ID: <20191205161359.20755-1-p.paillet@st.com> (raw) Convert the stm32-pwr regulator binding to DT schema format using json-schema. Signed-off-by: Pascal Paillet <p.paillet@st.com> --- Changes since v2: remove /schemas/types.yaml#/definitions/phandle-array for supply .../regulator/st,stm32mp1-pwr-reg.txt | 43 ------------- .../regulator/st,stm32mp1-pwr-reg.yaml | 64 +++++++++++++++++++ 2 files changed, 64 insertions(+), 43 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt deleted file mode 100644 index e372dd3f0c8a..000000000000 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt +++ /dev/null @@ -1,43 +0,0 @@ -STM32MP1 PWR Regulators ------------------------ - -Available Regulators in STM32MP1 PWR block are: - - reg11 for regulator 1V1 - - reg18 for regulator 1V8 - - usb33 for the swtich USB3V3 - -Required properties: -- compatible: Must be "st,stm32mp1,pwr-reg" -- list of child nodes that specify the regulator reg11, reg18 or usb33 - initialization data for defined regulators. The definition for each of - these nodes is defined using the standard binding for regulators found at - Documentation/devicetree/bindings/regulator/regulator.txt. -- vdd-supply: phandle to the parent supply/regulator node for vdd input -- vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33 - -Example: - -pwr_regulators: pwr@50001000 { - compatible = "st,stm32mp1,pwr-reg"; - reg = <0x50001000 0x10>; - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; - - reg11: reg11 { - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - reg18: reg18 { - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - usb33: usb33 { - regulator-name = "usb33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml new file mode 100644 index 000000000000..8d8f38fe85dc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32MP1 PWR voltage regulators + +maintainers: + - Pascal Paillet <p.paillet@st.com> + +properties: + compatible: + const: st,stm32mp1,pwr-reg + + reg: + maxItems: 1 + + vdd-supply: + description: Input supply phandle(s) for vdd input + + vdd_3v3_usbfs-supply: + description: Input supply phandle(s) for vdd_3v3_usbfs input + +patternProperties: + "^(reg11|reg18|usb33)$": + type: object + + allOf: + - $ref: "regulator.yaml#" + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + + reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +... -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Pascal Paillet <p.paillet@st.com> To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org> Cc: p.paillet@st.com Subject: [PATCH v3] regulator: Convert stm32-pwr regulator to json-schema Date: Thu, 5 Dec 2019 17:13:59 +0100 [thread overview] Message-ID: <20191205161359.20755-1-p.paillet@st.com> (raw) Convert the stm32-pwr regulator binding to DT schema format using json-schema. Signed-off-by: Pascal Paillet <p.paillet@st.com> --- Changes since v2: remove /schemas/types.yaml#/definitions/phandle-array for supply .../regulator/st,stm32mp1-pwr-reg.txt | 43 ------------- .../regulator/st,stm32mp1-pwr-reg.yaml | 64 +++++++++++++++++++ 2 files changed, 64 insertions(+), 43 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt deleted file mode 100644 index e372dd3f0c8a..000000000000 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt +++ /dev/null @@ -1,43 +0,0 @@ -STM32MP1 PWR Regulators ------------------------ - -Available Regulators in STM32MP1 PWR block are: - - reg11 for regulator 1V1 - - reg18 for regulator 1V8 - - usb33 for the swtich USB3V3 - -Required properties: -- compatible: Must be "st,stm32mp1,pwr-reg" -- list of child nodes that specify the regulator reg11, reg18 or usb33 - initialization data for defined regulators. The definition for each of - these nodes is defined using the standard binding for regulators found at - Documentation/devicetree/bindings/regulator/regulator.txt. -- vdd-supply: phandle to the parent supply/regulator node for vdd input -- vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33 - -Example: - -pwr_regulators: pwr@50001000 { - compatible = "st,stm32mp1,pwr-reg"; - reg = <0x50001000 0x10>; - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; - - reg11: reg11 { - regulator-name = "reg11"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - reg18: reg18 { - regulator-name = "reg18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - usb33: usb33 { - regulator-name = "usb33"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml new file mode 100644 index 000000000000..8d8f38fe85dc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STM32MP1 PWR voltage regulators + +maintainers: + - Pascal Paillet <p.paillet@st.com> + +properties: + compatible: + const: st,stm32mp1,pwr-reg + + reg: + maxItems: 1 + + vdd-supply: + description: Input supply phandle(s) for vdd input + + vdd_3v3_usbfs-supply: + description: Input supply phandle(s) for vdd_3v3_usbfs input + +patternProperties: + "^(reg11|reg18|usb33)$": + type: object + + allOf: + - $ref: "regulator.yaml#" + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pwr@50001000 { + compatible = "st,stm32mp1,pwr-reg"; + reg = <0x50001000 0x10>; + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + + reg11 { + regulator-name = "reg11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + reg18 { + regulator-name = "reg18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + usb33 { + regulator-name = "usb33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; +... -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-12-05 16:14 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-05 16:13 Pascal Paillet [this message] 2019-12-05 16:13 ` [PATCH v3] regulator: Convert stm32-pwr regulator to json-schema Pascal Paillet 2019-12-17 23:35 ` Rob Herring 2019-12-17 23:35 ` Rob Herring 2019-12-20 13:09 ` Applied "regulator: Convert stm32-pwr regulator to json-schema" to the regulator tree Mark Brown 2019-12-20 13:09 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191205161359.20755-1-p.paillet@st.com \ --to=p.paillet@st.com \ --cc=alexandre.torgue@st.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mark.rutland@arm.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.