From: Michael Walle <michael@walle.cc>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Yuantian Tang <andy.tang@nxp.com>,
Michael Walle <michael@walle.cc>
Subject: [PATCH v2 2/5] arm64: dts: ls1028a: add missing sai nodes
Date: Tue, 10 Dec 2019 00:43:47 +0100 [thread overview]
Message-ID: <20191209234350.18994-3-michael@walle.cc> (raw)
In-Reply-To: <20191209234350.18994-1-michael@walle.cc>
The LS1028A has six SAI cores.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 06082c932531..7a55314e9c8d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -545,6 +545,20 @@
status = "disabled";
};
+ sai3: audio-controller@f120000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf120000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 8>,
+ <&edma0 1 7>;
+ status = "disabled";
+ };
+
sai4: audio-controller@f130000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
@@ -559,6 +573,34 @@
status = "disabled";
};
+ sai5: audio-controller@f140000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf140000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 12>,
+ <&edma0 1 11>;
+ status = "disabled";
+ };
+
+ sai6: audio-controller@f150000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf150000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 14>,
+ <&edma0 1 13>;
+ status = "disabled";
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Yuantian Tang <andy.tang@nxp.com>, Li Yang <leoyang.li@nxp.com>,
Michael Walle <michael@walle.cc>,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>
Subject: [PATCH v2 2/5] arm64: dts: ls1028a: add missing sai nodes
Date: Tue, 10 Dec 2019 00:43:47 +0100 [thread overview]
Message-ID: <20191209234350.18994-3-michael@walle.cc> (raw)
In-Reply-To: <20191209234350.18994-1-michael@walle.cc>
The LS1028A has six SAI cores.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 06082c932531..7a55314e9c8d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -545,6 +545,20 @@
status = "disabled";
};
+ sai3: audio-controller@f120000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf120000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 8>,
+ <&edma0 1 7>;
+ status = "disabled";
+ };
+
sai4: audio-controller@f130000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
@@ -559,6 +573,34 @@
status = "disabled";
};
+ sai5: audio-controller@f140000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf140000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 12>,
+ <&edma0 1 11>;
+ status = "disabled";
+ };
+
+ sai6: audio-controller@f150000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0xf150000 0x0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 14>,
+ <&edma0 1 13>;
+ status = "disabled";
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-09 23:44 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-09 23:43 [PATCH v2 0/5] ls1028a: dts fixes and new board support Michael Walle
2019-12-09 23:43 ` Michael Walle
2019-12-09 23:43 ` [PATCH v2 1/5] arm64: dts: ls1028a: fix typo in TMU calibration data Michael Walle
2019-12-09 23:43 ` Michael Walle
2019-12-11 9:16 ` Shawn Guo
2019-12-11 9:16 ` Shawn Guo
2019-12-09 23:43 ` Michael Walle [this message]
2019-12-09 23:43 ` [PATCH v2 2/5] arm64: dts: ls1028a: add missing sai nodes Michael Walle
2019-12-11 9:16 ` Shawn Guo
2019-12-11 9:16 ` Shawn Guo
2019-12-09 23:43 ` [PATCH v2 3/5] dt-bindings: arm: fsl: add LS1028A based boards Michael Walle
2019-12-09 23:43 ` Michael Walle
2019-12-19 19:32 ` Rob Herring
2019-12-19 19:32 ` Rob Herring
2020-02-12 7:36 ` Shawn Guo
2020-02-12 7:36 ` Shawn Guo
2019-12-09 23:43 ` [PATCH v2 4/5] dt-bindings: arm: fsl: add Kontron sl28 boards Michael Walle
2019-12-09 23:43 ` Michael Walle
2019-12-19 19:34 ` Rob Herring
2019-12-19 19:34 ` Rob Herring
2019-12-09 23:43 ` [PATCH v2 5/5] arm64: dts: freescale: add Kontron sl28 support Michael Walle
2019-12-09 23:43 ` Michael Walle
2020-01-29 16:22 ` [PATCH v2 0/5] ls1028a: dts fixes and new board support Michael Walle
2020-01-29 16:22 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191209234350.18994-3-michael@walle.cc \
--to=michael@walle.cc \
--cc=andy.tang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.