All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Andrew F . Davis" <afd@ti.com>, Dave Gerlach <d-gerlach@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Keerthy <j-keerthy@ti.com>, Nishanth Menon <nm@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Roger Quadros <rogerq@ti.com>, Suman Anna <s-anna@ti.com>,
	Tero Kristo <t-kristo@ti.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO
Date: Tue, 10 Dec 2019 08:13:42 -0800	[thread overview]
Message-ID: <20191210161342.15142-1-tony@atomide.com> (raw)

For dra7 dcan and dwc3 instances we need to block clockdomain autoidle.
Let's do this with CLKDM_NOAUTO quirk flag and enable it for dcan and
dwc3.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c                 | 10 ++++++++--
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -473,7 +473,7 @@ static void sysc_clkdm_deny_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -485,7 +485,7 @@ static void sysc_clkdm_allow_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -1245,6 +1245,12 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	/* Quirks that need to be set based on detected module */
 	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
 		   SYSC_MODULE_QUIRK_AESS),
+	SYSC_QUIRK("dcan", 0x48480000, 0x20, -1, -1, 0xa3170504, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x48880000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -49,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_CLKDM_NOAUTO		BIT(21)
 #define SYSC_QUIRK_FORCE_MSTANDBY	BIT(20)
 #define SYSC_MODULE_QUIRK_AESS		BIT(19)
 #define SYSC_MODULE_QUIRK_SGX		BIT(18)
-- 
2.24.0

WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
	Dave Gerlach <d-gerlach@ti.com>, Keerthy <j-keerthy@ti.com>,
	linux-kernel@vger.kernel.org, "Andrew F . Davis" <afd@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Suman Anna <s-anna@ti.com>,
	linux-arm-kernel@lists.infradead.org,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH] bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO
Date: Tue, 10 Dec 2019 08:13:42 -0800	[thread overview]
Message-ID: <20191210161342.15142-1-tony@atomide.com> (raw)

For dra7 dcan and dwc3 instances we need to block clockdomain autoidle.
Let's do this with CLKDM_NOAUTO quirk flag and enable it for dcan and
dwc3.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c                 | 10 ++++++++--
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -473,7 +473,7 @@ static void sysc_clkdm_deny_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -485,7 +485,7 @@ static void sysc_clkdm_allow_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -1245,6 +1245,12 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	/* Quirks that need to be set based on detected module */
 	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
 		   SYSC_MODULE_QUIRK_AESS),
+	SYSC_QUIRK("dcan", 0x48480000, 0x20, -1, -1, 0xa3170504, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x48880000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -49,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_CLKDM_NOAUTO		BIT(21)
 #define SYSC_QUIRK_FORCE_MSTANDBY	BIT(20)
 #define SYSC_MODULE_QUIRK_AESS		BIT(19)
 #define SYSC_MODULE_QUIRK_SGX		BIT(18)
-- 
2.24.0

WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: Nishanth Menon <nm@ti.com>, Tero Kristo <t-kristo@ti.com>,
	Dave Gerlach <d-gerlach@ti.com>, Keerthy <j-keerthy@ti.com>,
	linux-kernel@vger.kernel.org, "Andrew F . Davis" <afd@ti.com>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Faiz Abbas <faiz_abbas@ti.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Suman Anna <s-anna@ti.com>,
	linux-arm-kernel@lists.infradead.org,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH] bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO
Date: Tue, 10 Dec 2019 08:13:42 -0800	[thread overview]
Message-ID: <20191210161342.15142-1-tony@atomide.com> (raw)

For dra7 dcan and dwc3 instances we need to block clockdomain autoidle.
Let's do this with CLKDM_NOAUTO quirk flag and enable it for dcan and
dwc3.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c                 | 10 ++++++++--
 include/linux/platform_data/ti-sysc.h |  1 +
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -473,7 +473,7 @@ static void sysc_clkdm_deny_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -485,7 +485,7 @@ static void sysc_clkdm_allow_idle(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata;
 
-	if (ddata->legacy_mode)
+	if (ddata->legacy_mode || (ddata->cfg.quirks & SYSC_QUIRK_CLKDM_NOAUTO))
 		return;
 
 	pdata = dev_get_platdata(ddata->dev);
@@ -1245,6 +1245,12 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	/* Quirks that need to be set based on detected module */
 	SYSC_QUIRK("aess", 0, 0, 0x10, -1, 0x40000000, 0xffffffff,
 		   SYSC_MODULE_QUIRK_AESS),
+	SYSC_QUIRK("dcan", 0x48480000, 0x20, -1, -1, 0xa3170504, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x48880000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
+	SYSC_QUIRK("dwc3", 0x488c0000, 0, 0x10, -1, 0x500a0200, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x00000006, 0xffffffff,
 		   SYSC_MODULE_QUIRK_HDQ1W),
 	SYSC_QUIRK("hdq1w", 0, 0, 0x14, 0x18, 0x0000000a, 0xffffffff,
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -49,6 +49,7 @@ struct sysc_regbits {
 	s8 emufree_shift;
 };
 
+#define SYSC_QUIRK_CLKDM_NOAUTO		BIT(21)
 #define SYSC_QUIRK_FORCE_MSTANDBY	BIT(20)
 #define SYSC_MODULE_QUIRK_AESS		BIT(19)
 #define SYSC_MODULE_QUIRK_SGX		BIT(18)
-- 
2.24.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-12-10 16:13 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-10 16:13 Tony Lindgren [this message]
2019-12-10 16:13 ` [PATCH] bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO Tony Lindgren
2019-12-10 16:13 ` Tony Lindgren
2019-12-24  7:52 ` Roger Quadros
2019-12-24  7:52   ` Roger Quadros
2019-12-24  7:52   ` Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191210161342.15142-1-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=afd@ti.com \
    --cc=d-gerlach@ti.com \
    --cc=faiz_abbas@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=j-keerthy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=rogerq@ti.com \
    --cc=s-anna@ti.com \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.