From: Benoit Parrot <bparrot@ti.com> To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>, <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org> Cc: Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Benoit Parrot <bparrot@ti.com> Subject: [Patch v4 02/10] ARM: dts: dra7: add cam clkctrl node Date: Wed, 11 Dec 2019 08:05:50 -0600 [thread overview] Message-ID: <20191211140558.10407-3-bparrot@ti.com> (raw) In-Reply-To: <20191211140558.10407-1-bparrot@ti.com> Add clkctrl nodes for CAM domain. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "cam-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index d1c2406ec71c..199f8d483f75 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1734,6 +1734,20 @@ }; }; + cam_cm: cam-cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x100>; + + cam_clkctrl: cam-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x2c>; + #clock-cells = <2>; + }; + }; + dss_cm: dss-cm@1100 { compatible = "ti,omap4-cm"; reg = <0x1100 0x100>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com> To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>, linux-omap@vger.kernel.org, linux-clk@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com> Subject: [Patch v4 02/10] ARM: dts: dra7: add cam clkctrl node Date: Wed, 11 Dec 2019 08:05:50 -0600 [thread overview] Message-ID: <20191211140558.10407-3-bparrot@ti.com> (raw) In-Reply-To: <20191211140558.10407-1-bparrot@ti.com> Add clkctrl nodes for CAM domain. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "cam-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index d1c2406ec71c..199f8d483f75 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1734,6 +1734,20 @@ }; }; + cam_cm: cam-cm@1000 { + compatible = "ti,omap4-cm"; + reg = <0x1000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x100>; + + cam_clkctrl: cam-clkctrl@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x2c>; + #clock-cells = <2>; + }; + }; + dss_cm: dss-cm@1100 { compatible = "ti,omap4-cm"; reg = <0x1100 0x100>; -- 2.17.1
next prev parent reply other threads:[~2019-12-11 14:03 UTC|newest] Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-11 14:05 [Patch v4 00/10] ARM: dts: dra7: add cal nodes Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-11 14:05 ` [Patch v4 01/10] clk: ti: dra7: add cam clkctrl data Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-30 19:58 ` Stephen Boyd 2019-12-30 19:58 ` Stephen Boyd 2020-01-21 7:32 ` Tero Kristo 2020-01-21 7:32 ` Tero Kristo 2019-12-11 14:05 ` Benoit Parrot [this message] 2019-12-11 14:05 ` [Patch v4 02/10] ARM: dts: dra7: add cam clkctrl node Benoit Parrot 2019-12-11 14:05 ` [Patch v4 03/10] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-11 14:05 ` [Patch v4 04/10] ARM: dts: dra7-l4: Add ti-sysc node for CAM Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-11 14:05 ` [Patch v4 05/10] ARM: dts: DRA72: Add CAL dtsi node Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-11 14:05 ` [Patch v4 06/10] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-11 14:05 ` [Patch v4 07/10] arm: dtsi: dra76x: Add CAL dtsi node Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-11 14:05 ` [Patch v4 08/10] arm: dts: dra76-evm: Add CAL and OV5640 nodes Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2019-12-11 14:05 ` [Patch v4 09/10] arm64: dts: k3-am65-main Add CAL node Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2020-01-24 11:32 ` Tero Kristo 2020-01-24 11:32 ` Tero Kristo 2019-12-11 14:05 ` [Patch v4 10/10] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera Benoit Parrot 2019-12-11 14:05 ` Benoit Parrot 2020-01-23 17:17 ` [Patch v4 00/10] ARM: dts: dra7: add cal nodes Tony Lindgren 2020-01-23 17:17 ` Tony Lindgren 2020-01-23 17:26 ` Tony Lindgren 2020-01-24 7:21 ` Tero Kristo 2020-01-24 7:21 ` Tero Kristo 2020-01-24 7:25 ` Tero Kristo 2020-01-24 7:25 ` Tero Kristo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191211140558.10407-3-bparrot@ti.com \ --to=bparrot@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.