From: Vignesh Raghavendra <vigneshr@ti.com>
To: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH v2 1/3] arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials
Date: Wed, 11 Dec 2019 22:34:12 +0530 [thread overview]
Message-ID: <20191211170414.7026-1-vigneshr@ti.com> (raw)
Enable I2Cs, ADCs, OSPIs and UFS peripherals present on J721e.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
v2:
Add GPIO expander IRQ lines
.../dts/ti/k3-j721e-common-proc-board.dts | 150 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 99 ++++++++++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 104 ++++++++++++
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 45 ++++++
4 files changed, 398 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2a3cd6174504..7a5c3d4adadd 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -67,6 +67,46 @@ main_usbss1_pins_default: main_usbss1_pins_default {
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
};
+
+ main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+ >;
+ };
+
+ main_i2c0_pins_default: main-i2c0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+ >;
+ };
+
+ main_i2c1_pins_default: main-i2c1-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+ >;
+ };
+
+ main_i2c3_pins_default: main-i2c3-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+ >;
+ };
+
+ main_i2c6_pins_default: main-i2c6-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+ >;
+ };
+
+ main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+ >;
+ };
};
&wkup_pmx0 {
@@ -75,6 +115,19 @@ sw11_button_pins_default: sw11_button_pins_default {
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
>;
};
+
+ mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+ J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+ J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+ J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+ J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+ J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+ J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+ >;
+ };
};
&wkup_uart0 {
@@ -279,3 +332,100 @@ &usb1 {
dr_mode = "host";
maximum-speed = "high-speed";
};
+
+&ospi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&tscadc0 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&tscadc1 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ exp1: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ exp2: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ exp4: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c3_pins_default>;
+ clock-frequency = <400000>;
+
+ exp3: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c6_pins_default>;
+ clock-frequency = <400000>;
+
+ exp5: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 1e4c2b78d66d..4f14b9a645c5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -596,4 +596,103 @@ usb1: usb@6400000 {
dr_mode = "otg";
};
};
+
+ main_i2c0: i2c@2000000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2000000 0x0 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 187 0>;
+ power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+ };
+
+ main_i2c1: i2c@2010000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2010000 0x0 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 188 0>;
+ power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c2: i2c@2020000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2020000 0x0 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 189 0>;
+ power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c3: i2c@2030000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2030000 0x0 0x100>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 190 0>;
+ power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c4: i2c@2040000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2040000 0x0 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 191 0>;
+ power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c5: i2c@2050000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2050000 0x0 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 192 0>;
+ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c6: i2c@2060000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2060000 0x0 0x100>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 193 0>;
+ power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ ufs_wrapper: ufs-wrapper@4e80000 {
+ compatible = "ti,j721e-ufs";
+ reg = <0x0 0x4e80000 0x0 0x100>;
+ power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 277 1>;
+ assigned-clocks = <&k3_clks 277 1>;
+ assigned-clock-parents = <&k3_clks 277 4>;
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufs@4e84000 {
+ compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+ reg = <0x0 0x4e84000 0x0 0x10000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+ clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+ clock-names = "core_clk", "phy_clk", "ref_clk";
+ dma-coherent;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 555dc7b7aedc..7cf1490f3928 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -121,4 +121,108 @@ wkup_gpio1: gpio@42100000 {
clocks = <&k3_clks 114 0>;
clock-names = "gpio";
};
+
+ mcu_i2c0: i2c@40b00000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x40b00000 0x0 0x100>;
+ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 194 0>;
+ power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ mcu_i2c1: i2c@40b10000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x40b10000 0x0 0x100>;
+ interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 195 0>;
+ power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ wkup_i2c0: i2c@42120000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x42120000 0x0 0x100>;
+ interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 197 0>;
+ power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+ };
+
+ fss: fss@47000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x47000000 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi";
+ reg = <0x0 0x47040000 0x0 0x100>,
+ <0x5 0x00000000 0x1 0x0000000>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 103 0>;
+ assigned-clocks = <&k3_clks 103 0>;
+ assigned-clock-parents = <&k3_clks 103 2>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ospi1: spi@47050000 {
+ compatible = "ti,am654-ospi";
+ reg = <0x0 0x47050000 0x0 0x100>,
+ <0x7 0x00000000 0x1 0x00000000>;
+ interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 104 0>;
+ power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ tscadc0: tscadc@40200000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40200000 0x0 0x1000>;
+ interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 0 1>;
+ assigned-clocks = <&k3_clks 0 3>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
+
+ tscadc1: tscadc@40210000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 1 1>;
+ assigned-clocks = <&k3_clks 1 3>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 1884fc70148f..7680109ca60a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -27,3 +27,48 @@ secure_ddr: optee@9e800000 {
};
};
};
+
+&wkup_pmx0 {
+ wkup_i2c0_pins_default: wkup_i2c0_pins_default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+ >;
+ };
+
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */
+ J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */
+ J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */
+ J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */
+ J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */
+ J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */
+ J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */
+ J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */
+ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */
+ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+ >;
+ };
+};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
--
2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>
Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH v2 1/3] arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials
Date: Wed, 11 Dec 2019 22:34:12 +0530 [thread overview]
Message-ID: <20191211170414.7026-1-vigneshr@ti.com> (raw)
Enable I2Cs, ADCs, OSPIs and UFS peripherals present on J721e.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
---
v2:
Add GPIO expander IRQ lines
.../dts/ti/k3-j721e-common-proc-board.dts | 150 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 99 ++++++++++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 104 ++++++++++++
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 45 ++++++
4 files changed, 398 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2a3cd6174504..7a5c3d4adadd 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -67,6 +67,46 @@ main_usbss1_pins_default: main_usbss1_pins_default {
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
>;
};
+
+ main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+ >;
+ };
+
+ main_i2c0_pins_default: main-i2c0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+ >;
+ };
+
+ main_i2c1_pins_default: main-i2c1-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+ >;
+ };
+
+ main_i2c3_pins_default: main-i2c3-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+ >;
+ };
+
+ main_i2c6_pins_default: main-i2c6-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+ >;
+ };
+
+ main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+ >;
+ };
};
&wkup_pmx0 {
@@ -75,6 +115,19 @@ sw11_button_pins_default: sw11_button_pins_default {
J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
>;
};
+
+ mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+ J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+ J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+ J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+ J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+ J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+ J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+ J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+ >;
+ };
};
&wkup_uart0 {
@@ -279,3 +332,100 @@ &usb1 {
dr_mode = "host";
maximum-speed = "high-speed";
};
+
+&ospi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&tscadc0 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&tscadc1 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ exp1: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ exp2: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ exp4: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c3_pins_default>;
+ clock-frequency = <400000>;
+
+ exp3: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&main_i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c6_pins_default>;
+ clock-frequency = <400000>;
+
+ exp5: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 1e4c2b78d66d..4f14b9a645c5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -596,4 +596,103 @@ usb1: usb@6400000 {
dr_mode = "otg";
};
};
+
+ main_i2c0: i2c@2000000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2000000 0x0 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 187 0>;
+ power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+ };
+
+ main_i2c1: i2c@2010000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2010000 0x0 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 188 0>;
+ power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c2: i2c@2020000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2020000 0x0 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 189 0>;
+ power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c3: i2c@2030000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2030000 0x0 0x100>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 190 0>;
+ power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c4: i2c@2040000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2040000 0x0 0x100>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 191 0>;
+ power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c5: i2c@2050000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2050000 0x0 0x100>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 192 0>;
+ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ main_i2c6: i2c@2060000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x2060000 0x0 0x100>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 193 0>;
+ power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ ufs_wrapper: ufs-wrapper@4e80000 {
+ compatible = "ti,j721e-ufs";
+ reg = <0x0 0x4e80000 0x0 0x100>;
+ power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 277 1>;
+ assigned-clocks = <&k3_clks 277 1>;
+ assigned-clock-parents = <&k3_clks 277 4>;
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufs@4e84000 {
+ compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+ reg = <0x0 0x4e84000 0x0 0x10000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+ clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+ clock-names = "core_clk", "phy_clk", "ref_clk";
+ dma-coherent;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 555dc7b7aedc..7cf1490f3928 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -121,4 +121,108 @@ wkup_gpio1: gpio@42100000 {
clocks = <&k3_clks 114 0>;
clock-names = "gpio";
};
+
+ mcu_i2c0: i2c@40b00000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x40b00000 0x0 0x100>;
+ interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 194 0>;
+ power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ mcu_i2c1: i2c@40b10000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x40b10000 0x0 0x100>;
+ interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 195 0>;
+ power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+ };
+
+ wkup_i2c0: i2c@42120000 {
+ compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+ reg = <0x0 0x42120000 0x0 0x100>;
+ interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "fck";
+ clocks = <&k3_clks 197 0>;
+ power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+ };
+
+ fss: fss@47000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x47000000 0x0 0x100>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi";
+ reg = <0x0 0x47040000 0x0 0x100>,
+ <0x5 0x00000000 0x1 0x0000000>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 103 0>;
+ assigned-clocks = <&k3_clks 103 0>;
+ assigned-clock-parents = <&k3_clks 103 2>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ospi1: spi@47050000 {
+ compatible = "ti,am654-ospi";
+ reg = <0x0 0x47050000 0x0 0x100>,
+ <0x7 0x00000000 0x1 0x00000000>;
+ interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 104 0>;
+ power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ tscadc0: tscadc@40200000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40200000 0x0 0x1000>;
+ interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 0 1>;
+ assigned-clocks = <&k3_clks 0 3>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
+
+ tscadc1: tscadc@40210000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 1 1>;
+ assigned-clocks = <&k3_clks 1 3>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 1884fc70148f..7680109ca60a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -27,3 +27,48 @@ secure_ddr: optee@9e800000 {
};
};
};
+
+&wkup_pmx0 {
+ wkup_i2c0_pins_default: wkup_i2c0_pins_default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+ J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+ >;
+ };
+
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */
+ J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */
+ J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */
+ J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */
+ J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */
+ J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */
+ J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */
+ J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */
+ J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */
+ J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+ >;
+ };
+};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
--
2.24.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-12-11 17:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 17:04 Vignesh Raghavendra [this message]
2019-12-11 17:04 ` [PATCH v2 1/3] arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials Vignesh Raghavendra
2019-12-11 17:04 ` [PATCH v2 2/3] arm64: dts: ti: k3-am65: Add OSPI DT node Vignesh Raghavendra
2019-12-11 17:04 ` Vignesh Raghavendra
2019-12-11 17:04 ` [PATCH v2 3/3] arm64: dts: k3-am654-base-board: Add IRQ line for GPIO expander Vignesh Raghavendra
2019-12-11 17:04 ` Vignesh Raghavendra
2020-01-17 12:56 ` [PATCH v2 1/3] arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials Tero Kristo
2020-01-17 12:56 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211170414.7026-1-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.