From: Alison Wang <alison.wang@nxp.com> To: Marcel Ziswiler <marcel.ziswiler@toradex.com>, "igor.opaniuk@toradex.com" <igor.opaniuk@toradex.com>, "festevam@gmail.com" <festevam@gmail.com>, "broonie@kernel.org" <broonie@kernel.org>, "lgirdwood@gmail.com" <lgirdwood@gmail.com>, "oleksandr.suvorov@toradex.com" <oleksandr.suvorov@toradex.com>, "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Cc: Alison Wang <alison.wang@nxp.com> Subject: [PATCH] ASoC: sgtl5000: Revert "ASoC: sgtl5000: Fix of unmute outputs on probe" Date: Thu, 12 Dec 2019 07:19:46 +0000 [thread overview] Message-ID: <20191212071847.45561-1-alison.wang@nxp.com> (raw) This reverts commit 631bc8f0134ae9620d86a96b8c5f9445d91a2dca. In commit 631bc8f0134a, snd_soc_component_update_bits is used instead of snd_soc_component_write. Although EN_HP_ZCD and EN_ADC_ZCD are enabled in ANA_CTRL register, MUTE_LO, MUTE_HP and MUTE_ADC bits are remained as the default value. It causes LO, HP and ADC are all muted after driver probe. The patch is to revert this commit, snd_soc_component_write is still used and MUTE_LO, MUTE_HP and MUTE_ADC are set as zero (unmuted). Signed-off-by: Alison Wang <alison.wang@nxp.com> --- sound/soc/codecs/sgtl5000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index aa1f963..0b35fca 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1458,7 +1458,6 @@ static int sgtl5000_probe(struct snd_soc_component *component) int ret; u16 reg; struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); - unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN; /* power up sgtl5000 */ ret = sgtl5000_set_power_regs(component); @@ -1486,8 +1485,9 @@ static int sgtl5000_probe(struct snd_soc_component *component) 0x1f); snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg); - snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL, - zcd_mask, zcd_mask); + snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL, + SGTL5000_HP_ZCD_EN | + SGTL5000_ADC_ZCD_EN); snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL, SGTL5000_BIAS_R_MASK, -- 2.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Alison Wang <alison.wang@nxp.com> To: Marcel Ziswiler <marcel.ziswiler@toradex.com>, "igor.opaniuk@toradex.com" <igor.opaniuk@toradex.com>, "festevam@gmail.com" <festevam@gmail.com>, "broonie@kernel.org" <broonie@kernel.org>, "lgirdwood@gmail.com" <lgirdwood@gmail.com>, "oleksandr.suvorov@toradex.com" <oleksandr.suvorov@toradex.com>, "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org> Cc: Alison Wang <alison.wang@nxp.com> Subject: [alsa-devel] [PATCH] ASoC: sgtl5000: Revert "ASoC: sgtl5000: Fix of unmute outputs on probe" Date: Thu, 12 Dec 2019 07:19:46 +0000 [thread overview] Message-ID: <20191212071847.45561-1-alison.wang@nxp.com> (raw) This reverts commit 631bc8f0134ae9620d86a96b8c5f9445d91a2dca. In commit 631bc8f0134a, snd_soc_component_update_bits is used instead of snd_soc_component_write. Although EN_HP_ZCD and EN_ADC_ZCD are enabled in ANA_CTRL register, MUTE_LO, MUTE_HP and MUTE_ADC bits are remained as the default value. It causes LO, HP and ADC are all muted after driver probe. The patch is to revert this commit, snd_soc_component_write is still used and MUTE_LO, MUTE_HP and MUTE_ADC are set as zero (unmuted). Signed-off-by: Alison Wang <alison.wang@nxp.com> --- sound/soc/codecs/sgtl5000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index aa1f963..0b35fca 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1458,7 +1458,6 @@ static int sgtl5000_probe(struct snd_soc_component *component) int ret; u16 reg; struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); - unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN; /* power up sgtl5000 */ ret = sgtl5000_set_power_regs(component); @@ -1486,8 +1485,9 @@ static int sgtl5000_probe(struct snd_soc_component *component) 0x1f); snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg); - snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL, - zcd_mask, zcd_mask); + snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL, + SGTL5000_HP_ZCD_EN | + SGTL5000_ADC_ZCD_EN); snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL, SGTL5000_BIAS_R_MASK, -- 2.9.5 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-12-12 7:19 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-12 7:19 Alison Wang [this message] 2019-12-12 7:19 ` [alsa-devel] [PATCH] ASoC: sgtl5000: Revert "ASoC: sgtl5000: Fix of unmute outputs on probe" Alison Wang 2019-12-12 9:10 ` Oleksandr Suvorov 2019-12-12 9:16 ` Oleksandr Suvorov 2019-12-12 9:24 ` [EXT] " Alison Wang 2019-12-12 9:24 ` [alsa-devel] " Alison Wang 2019-12-12 10:07 ` Alison Wang 2019-12-12 10:07 ` [alsa-devel] " Alison Wang 2019-12-12 10:23 ` Oleksandr Suvorov 2019-12-12 10:23 ` Oleksandr Suvorov 2019-12-12 10:46 ` [alsa-devel] " Alison Wang 2019-12-12 12:23 ` Mark Brown 2019-12-12 12:23 ` [alsa-devel] " Mark Brown 2019-12-12 12:31 ` Alison Wang 2019-12-12 15:11 ` Daniel Baluta 2019-12-13 1:51 ` Alison Wang 2020-03-19 20:49 ` Tim Harvey 2020-03-19 20:49 ` Tim Harvey 2020-03-20 7:26 ` Marcel Ziswiler 2020-03-20 7:26 ` Marcel Ziswiler 2020-03-20 15:51 ` Tim Harvey 2020-03-20 15:51 ` Tim Harvey 2020-03-20 17:05 ` Oleksandr Suvorov 2020-03-20 17:05 ` Oleksandr Suvorov 2020-03-20 22:51 ` Tim Harvey 2020-03-20 22:51 ` Tim Harvey 2020-03-20 12:15 ` Mark Brown 2020-03-20 12:15 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191212071847.45561-1-alison.wang@nxp.com \ --to=alison.wang@nxp.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=festevam@gmail.com \ --cc=igor.opaniuk@toradex.com \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=marcel.ziswiler@toradex.com \ --cc=oleksandr.suvorov@toradex.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.