From: Chen-Yu Tsai <wens@kernel.org> To: Maxime Ripard <mripard@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Sakari Ailus <sakari.ailus@linux.intel.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: Chen-Yu Tsai <wens@kernel.org>, linux-media@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Chen-Yu Tsai <wens@csie.org> Subject: [PATCH 08/14] ARM: dts: sun7i: Add CSI1 controller and pinmux options Date: Mon, 16 Dec 2019 00:59:18 +0800 [thread overview] Message-ID: <20191215165924.28314-9-wens@kernel.org> (raw) In-Reply-To: <20191215165924.28314-1-wens@kernel.org> From: Chen-Yu Tsai <wens@csie.org> The CSI controller driver now supports the second CSI controller, CSI1. Add a device node for it. Pinmuxing options for the MCLK output, the standard 8-bit interface, and a secondary 24-bit interface are included. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun7i-a20.dtsi | 36 ++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 8aebefd6accf..92b5be97085d 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -729,6 +729,17 @@ ohci1: usb@1c1c400 { status = "disabled"; }; + csi1: csi@1c1d000 { + compatible = "allwinner,sun7i-a20-csi1", + "allwinner,sun4i-a10-csi1"; + reg = <0x01c1d000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "ram"; + resets = <&ccu RST_CSI1>; + status = "disabled"; + }; + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; @@ -802,6 +813,31 @@ csi0_clk_pin: csi-clk-pin { function = "csi0"; }; + /omit-if-no-ref/ + csi1_8bits_pg_pins: csi1-8bits-pg-pins { + pins = "PG0", "PG2", "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8", "PG9", "PG10", + "PG11"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_24bits_ph_pins: csi1-24bits-ph-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH8", "PH9", + "PH10", "PH11", "PH12", "PH13", "PH14", + "PH15", "PH16", "PH17", "PH18", "PH19", + "PH20", "PH21", "PH22", "PH23", "PH24", + "PH25", "PH26", "PH27"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_clk_pg_pin: csi1-clk-pg-pin { + pins = "PG1"; + function = "csi1"; + }; + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Chen-Yu Tsai <wens@kernel.org> To: Maxime Ripard <mripard@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Sakari Ailus <sakari.ailus@linux.intel.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>, Chen-Yu Tsai <wens@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org Subject: [PATCH 08/14] ARM: dts: sun7i: Add CSI1 controller and pinmux options Date: Mon, 16 Dec 2019 00:59:18 +0800 [thread overview] Message-ID: <20191215165924.28314-9-wens@kernel.org> (raw) In-Reply-To: <20191215165924.28314-1-wens@kernel.org> From: Chen-Yu Tsai <wens@csie.org> The CSI controller driver now supports the second CSI controller, CSI1. Add a device node for it. Pinmuxing options for the MCLK output, the standard 8-bit interface, and a secondary 24-bit interface are included. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun7i-a20.dtsi | 36 ++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 8aebefd6accf..92b5be97085d 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -729,6 +729,17 @@ ohci1: usb@1c1c400 { status = "disabled"; }; + csi1: csi@1c1d000 { + compatible = "allwinner,sun7i-a20-csi1", + "allwinner,sun4i-a10-csi1"; + reg = <0x01c1d000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "ram"; + resets = <&ccu RST_CSI1>; + status = "disabled"; + }; + spi3: spi@1c1f000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c1f000 0x1000>; @@ -802,6 +813,31 @@ csi0_clk_pin: csi-clk-pin { function = "csi0"; }; + /omit-if-no-ref/ + csi1_8bits_pg_pins: csi1-8bits-pg-pins { + pins = "PG0", "PG2", "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8", "PG9", "PG10", + "PG11"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_24bits_ph_pins: csi1-24bits-ph-pins { + pins = "PH0", "PH1", "PH2", "PH3", "PH4", + "PH5", "PH6", "PH7", "PH8", "PH9", + "PH10", "PH11", "PH12", "PH13", "PH14", + "PH15", "PH16", "PH17", "PH18", "PH19", + "PH20", "PH21", "PH22", "PH23", "PH24", + "PH25", "PH26", "PH27"; + function = "csi1"; + }; + + /omit-if-no-ref/ + csi1_clk_pg_pin: csi1-clk-pg-pin { + pins = "PG1"; + function = "csi1"; + }; + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", -- 2.24.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-15 16:59 UTC|newest] Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-15 16:59 [PATCH 00/14] media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-15 16:59 ` [PATCH 01/14] dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20 Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 10:30 ` Maxime Ripard 2019-12-16 10:30 ` Maxime Ripard 2019-12-19 23:56 ` Rob Herring 2019-12-19 23:56 ` Rob Herring 2019-12-15 16:59 ` [PATCH 02/14] dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40 Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 10:30 ` Maxime Ripard 2019-12-16 10:30 ` Maxime Ripard 2019-12-19 23:57 ` Rob Herring 2019-12-19 23:57 ` Rob Herring 2019-12-15 16:59 ` [PATCH 03/14] media: sun4i-csi: Fix data sampling polarity handling Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 13:36 ` Maxime Ripard 2019-12-16 13:36 ` Maxime Ripard 2019-12-15 16:59 ` [PATCH 04/14] media: sun4i-csi: Fix [HV]sync " Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 13:37 ` Maxime Ripard 2019-12-16 13:37 ` Maxime Ripard 2023-01-16 10:03 ` Oleg Verych 2023-01-16 10:03 ` Oleg Verych 2023-01-16 10:16 ` Maxime Ripard 2023-01-16 10:16 ` Maxime Ripard 2023-01-16 18:43 ` Oleg Verych 2023-01-16 18:43 ` Oleg Verych 2019-12-15 16:59 ` [PATCH 05/14] media: sun4i-csi: Deal with DRAM offset Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 13:38 ` Maxime Ripard 2019-12-16 13:38 ` Maxime Ripard 2019-12-15 16:59 ` [PATCH 06/14] media: sun4i-csi: Add support for A10 CSI1 camera sensor interface Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 13:38 ` Maxime Ripard 2019-12-16 13:38 ` Maxime Ripard 2020-01-02 11:33 ` Sakari Ailus 2020-01-02 11:33 ` Sakari Ailus 2020-01-02 11:36 ` Chen-Yu Tsai 2020-01-02 11:36 ` Chen-Yu Tsai 2019-12-15 16:59 ` [PATCH 07/14] ARM: dts: sun4i: Add CSI1 controller and pinmux options Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai [this message] 2019-12-15 16:59 ` [PATCH 08/14] ARM: dts: sun7i: " Chen-Yu Tsai 2019-12-15 16:59 ` [PATCH 09/14] ARM: dts: sun8i: r40: Add I2C " Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 10:29 ` Maxime Ripard 2019-12-16 10:29 ` Maxime Ripard 2019-12-15 16:59 ` [PATCH 10/14] dt-bindings: bus: sunxi: Add R40 MBUS compatible Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-19 23:58 ` Rob Herring 2019-12-19 23:58 ` Rob Herring 2019-12-15 16:59 ` [PATCH 11/14] ARM: dts: sun8i: r40: Add device node for CSI0 Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-16 13:39 ` Maxime Ripard 2019-12-16 13:39 ` Maxime Ripard 2019-12-16 13:42 ` Chen-Yu Tsai 2019-12-16 13:42 ` Chen-Yu Tsai 2019-12-16 13:53 ` Maxime Ripard 2019-12-16 13:53 ` Maxime Ripard 2019-12-15 16:59 ` [PATCH 12/14] [DO NOT MERGE] ARM: dts: sun4i: cubieboard: Enable OV7670 camera on CSI1 Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-15 16:59 ` [PATCH 13/14] [DO NOT MERGE] ARM: dts: sun7i: cubieboard2: " Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2019-12-15 16:59 ` [PATCH 14/14] [DO NOT MERGE] ARM: dts: sun8i-r40: bananapi-m2-ultra: Enable OV5640 camera Chen-Yu Tsai 2019-12-15 16:59 ` Chen-Yu Tsai 2020-01-01 10:20 ` [PATCH 00/14] media: sun4i-csi: A10/A20 CSI1 and R40 CSI0 support Chen-Yu Tsai 2020-01-01 10:20 ` Chen-Yu Tsai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191215165924.28314-9-wens@kernel.org \ --to=wens@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mchehab@kernel.org \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=sakari.ailus@linux.intel.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.